Journals / Journal of Sustainable Construction Materials and Technologies / 2022 / Cilt: 7 Sayı: 3

Bibliographic analysis on 3D printing in the building and construction industry: Printing systems, material properties, challenges, and future trends

Pages
198–220
Publication Date
2022-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, this paper discussed the challenges and limitations of current systems, as well as potential future work to improve their capability and print quality.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In recent years, significant advancements in the development of large-scale 3D printers and construction materials have been made to meet the demand for industrial scale 3D printing construction.
📊
Key Findings & Data:It is significant to construct the buildings and structural components by using 3D concrete printing.
💡
Conclusion & Impact:Finally, this paper discussed the challenges and limitations of current systems, as well as potential future work to improve their capability and print quality.
🔬Design:Review & Systematic Survey
📍Scope:2002 Verileri
⚙️Variables:Additive manufacturing · 3D concrete printing · material properties

Abstract

In recent years, significant advancements in the development of large-scale 3D printers and construction materials have been made to meet the demand for industrial scale 3D printing construction. It is significant to construct the buildings and structural components by using 3D concrete printing. Additive manufacturing (AM) main benefits are freedom of design, construction waste reduction, mass customization, and ability to manufacture the complex structures. The major issues including the optimization of printing material which possess the suitable properties for 3D concrete printing. However, this technology towards the green building construction seems to improve the conventional methods by reducing the requirement of human resource, high investment cost, and formworks. The research community's interest in 3D printing for architecture and construction has grown significantly over the last few years. This paper review the latest trend of research and state of the art technologies in 3D printing in building and construction by analyzing the publications from 2002 to 2022. Based on aforementioned analysis of publications, printing methods, concrete printing systems and influence of constituent’s materials and chemical admixtures on concrete material properties are briefly discussed. Finally, this paper discussed the challenges and limitations of current systems, as well as potential future work to improve their capability and print quality.

🔖

Cite This Article

SHAHZAD, Q., UMAİR, M., WAQAR, S. (2022). Bibliographic analysis on 3D printing in the building and construction industry: Printing systems, material properties, challenges, and future trends. Journal of Sustainable Construction Materials and Technologies, Cilt: 7 Sayı: 3, 198–220. https://ajindex.com/articles/908174

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. R. Janis, V. N. Nerella, V. Mechtcherine, and G. Meschke. "Extrusion process simulation and layer shape prediction during 3D-concrete-printing using the Particle Finite Element Method." Automation in Construction 136 (2022): 104173.
  2. B. Mustafa, R. Jotangia, M. Y. Baaj, and I. Mousleh. "3D concrete printing for sustainable and economical construction: A comparative study." Automation in Construction 134 (2022): 104087.
  3. G. Clément, R. Duballet, P. Roux, N. Gaudillière, J. Dirrenberger, and P. Morel. "Large-scale 3D printing of ultra-high performance concrete–a new processing route for architects and builders." Materials & Design 100 (2016): 102-109.
  4. K. Behrokh, and R. Dutton. "Innovative rapid prototyping process makes large sized, smooth surfaced complex shapes in a wide variety of materials." Materials Technology 13, no. 2 (1998): 53-56.
  5. S. Rupert, and D. Andreen. "The role of additive manufacturing and physiomimetic computational design for digital construction." Architectural Design 82, no. 2 (2012): 126-135.
  6. M.J.C. Starr, www. cnet. com/news/worlds-first-3d-printed-apartment-building-constructed-in-china, World's first 3D-printed apartment building constructed in China, (2015)
  7. Q. Shahzad, X. Wang, W. Wang, Y. Wan, G. Li, C. Ren, Y. Mao, Coordinated adjustment and optimization of setting time, flowability, and mechanical strength for construction 3D printing material derived from solid waste, Constr. Build. Mater. 259 (2020).
  8. M. Guowei, and L. Wang. "A critical review of preparation design and workability measurement of concrete material for largescale 3D printing." Frontiers of Structural and Civil Engineering 12, no. 3 (2018): 382-400.
  9. G. G. John, R. Williams, P. Purnell, and E. Farahi. "3D Printing of cement composites." Advances in Applied Ceramics 109, no. 5 (2010): 287-290
  10. M. Anne-Kathrin, L. Dezmirean, J. Will, and P. Greil. "Three-dimensional printing of flash-setting calcium aluminate cement." Journal of materials science 46, no. 9 (2011): 2947-2954.
  11. K. Behrokh, S. Bukkapatnam, H. Kwon, and J. Saito. "Experimental investigation of contour crafting using ce