Journals / Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi / 2019 / Cilt: 27 Sayı: 1

ERGONOMIC RISK ASSESSMENT IN STOVE ASSEMBLY LINE

SOBA MONTAJ HATTINDA ERGONOMİK RİSK DEĞERLENDİRMESİ

Pages
21–39
Publication Date
2019-04-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been determined that the economic dimension of the proposals can be fulfilled to provide a healthier work environment for the employees.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The solid fuel stove manufacturing industry is one of the sectors where physical strains are intense and therefore workers have musculoskeletal disorders.
📊
Key Findings & Data:In the first cell of the assembly workshop where the physical constraints are greatest, 3 stations and a total of 36 processes have been defined for the installation of the Four Corner Fireplace Stove.
💡
Conclusion & Impact:It has been determined that the economic dimension of the proposals can be fulfilled to provide a healthier work environment for the employees.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Ergonomik Risk Değerlendirmesi · Kas-İskelet Sistemi Hastalıkları · REBA

Abstract

The solid fuel stove manufacturing industry is one of the sectors where physical strains are intense and therefore workers have musculoskeletal disorders. In this study, it was aimed to develop a remediation proposal for the detection and reduction of the physical constraints that a casting factory is exposed to by workers working in solid fuel stove assembly lines. The manufacturing process of the plant was examined. In the first cell of the assembly workshop where the physical constraints are greatest, 3 stations and a total of 36 processes have been defined for the installation of the Four Corner Fireplace Stove. Ergonomic risk assessments have been made with REBA and BAUA methods for all operations in each station. REBA scores; 2-12 (very high) for the first, second and third stations respectively; 2-11 (very high); 2-10 (high); The BAUA scores were 1-4 (very high). For the operations to have high risk scores, improvement studies were carried out in 6 out of 8 operations in the first station, 3 out of 10 operations in the second station and 8 out of 18 operations in the third station. As a result of the developments, in the REBA scores; 72% in the first station, 41% in the second station and 40% in the third station, and the risk scores of the transactions could be reduced to "acceptable" levels. For BAUA, the percentage of improvement was 70%, 51% and 43%, respectively. It has been determined that the economic dimension of the proposals can be fulfilled to provide a healthier work environment for the employees.

Özet

Katı yakıtlı soba üretim sektörü fiziksel zorlanmaların yoğun olduğu ve bu nedenle de çalışanların kas iskelet sistemi rahatsızlıklarını yaşadıkları sektörlerden biridir. Bu çalışmada, bir döküm fabrikasının katı yakıtlı soba montaj hatlarında çalışan işçilerin maruz kaldıkları fiziksel zorlanmaların tespiti ve azaltılması için iyileştirme önerileri geliştirilmesi amaçlanmıştır. İşletmenin üretim süreci incelenmiş, fiziksel zorlanmaların en fazla olduğu montaj atölyesinin birinci hücresinde, Dört Köşe Şömine Soba montajı için 3 istasyon ve toplam 36 işlem tanımlanmıştır. Her bir istasyondaki tüm işlemler için REBA ve BAUA yöntemleri ile ergonomik risk değerlendirmeleri yapılmıştır. REBA skorları; birinci, ikinci ve üçüncü istasyonlar için sırası ile 2-12 (çok yüksek); 2-11 (çok yüksek); 2-10 (yüksek); BAUA skorları ise 1-4 (epey fazla yük) elde edilmiştir. Risk skorları yüksek olan; birinci istasyonda 8 işlemden 6, ikinci istasyonda 10 işlemden 3 ve üçüncü istasyonda 18 işlemden 8’inde iyileştirme çalışmaları yapılmıştır. Geliştirmeler sonucunda, REBA skorlarında; birinci istasyonda %72, ikinci istasyonda %41 ve üçüncü istasyonda %40 iyileştirme sağlanmış ve işlemlerin risk skorları “kabul edilebilir” düzeye indirilebilmiştir. BAUA için ise iyileştirme yüzdeleri sırası ile %70, %51 ve %43 olarak elde edilmiştir. Çalışanlara daha sağlıklı bir çalışma ortamı sağlamak için önerilerin maddi boyutunun yerine getirilebilir düzeyde olduğu belirlenmiştir.

🔖

Cite This Article

KAHYA, E., ACAR, Ş. B., ŞAHİN, D., SARIÇİÇEK, İ. (2019). ERGONOMIC RISK ASSESSMENT IN STOVE ASSEMBLY LINE. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, Cilt: 27 Sayı: 1, 21–39. https://ajindex.com/articles/905133

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Akay, D., Dağdeviren, M. Ve Kurt, M. (2003). Çalışma Duruşlarının Ergonomik Analizi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 18(3), 73-84.
  2. Akay, D. Ve Toksari, M. D. (2009). Ant Colony Optimization Approach for Classification of Occupational Low Back Disorder Risks. Human Factors and Ergonomics in Manufacturing, 19 (1), 1–14.
  3. Apaydın, U., Erol, E., Koçyiğit M.F. ve Elbasan, B. (2016). Öğretmenlerde Bel Ağrısı İle İlişkili Faktörlerin Belirlenmesi, Turkish Journal of Physiotherapy and Rehabilitation, 27(2), 42-47.
  4. Atıcı, H., Gönen, D. ve Oral, A., (2015). Çalışanlarda Zorlanmaya Neden Olan Duruşların REBA Yöntemi ile Ergonomik Analizi. Mühendislik Bilimleri ve Tasarım Dergisi, 3(3), 239-244.
  5. Atasoy, A., Keskin, F., Başkesen, N. ve Tekingündüz, S. (2010). Laboratuvar çalışanlarında işe bağlı kas iskelet sistemi sorunları ve ergonomik risklerinin değerlendirilmesi. Sağlıkta Performans ve Kalite Dergisi, 2, 1309-1972.
  6. Babalık F. (2016). Mühendisler İçin Ergonomi –İşbilim-, Beşinci Baskı,
  7. Dora Yayın Dağıtım Ltd.Şti., Bursa. Bilir, N. (2011).
  8. Meslek Hastalıkları Tanı, Tedavi ve Korunma İlkeleri. Hacettepe Tıp Dergisi, 42(4), 142-157.
  9. Chiasson, M.E., Imbeau, D., Major, J., Aubry, K. ve Delisle A. (2012). Comparing the Results of Eight Methods Used to Evaluate Risk Factors Associated With Musculoskeletal Disorders, International Journey Of Industrial Ergonomics, 42, 478-488.
  10. David, C. G. (2005). Ergonomic Methods for Assessing Exposure to Risk Factors for Work- related Musculoskeletal Disorders, Occupational Medicine, 55, 190-199.
  11. Enez, K. ve Nalbantoğlu, S.S. (2015). REBA yönteminin ormancılık faaliyetleri açısından değerlendirilmesi. Mühendislik Bilimleri ve Tasarım Dergisi, 3(3), ÖS: Ergonomi2015, 127-131.
  12. Engström, T., Medbo, P., 1997. Data Collection and Analysis of Manual Work Using Video Recording and Personal Computer Techniques. International Journal of Industrial Ergonomics, 19, 291-298.
  13. Erdinç, O. ve Vayvay, Ö. (2006). Hızlı Maruziyet Değerlendirme Ölçütü (Quıck Exposure Check) Yöntemiyle Tekstil Üretimindeki Ergonomik İyileştirmelerin Kas-İskelet Risklerine Etkisinin İncelenmesi, 12.Ulusal Ergonomi Kongresi Bildirileri, 82-86.
  14. Esen, H. ve Fığlalı, N., (2013). Çalışma duruşu analiz yöntemleri ve çalışma duruşunun kas-iskelet sistemi rahatsızlıklarına etkileri. Sakarya Üniversitesi Fen Bilimleri Dergisi, 17(1), 41-51.
  15. Gangopadhyay, S., Das, B., Das, T., Ghoshal, G. ve Ghosh, T. (2015). An Ergonomics Study on Posture-Related Discomfort a