SavedAdd your journal

Journals / Environmental Research and Technology / 2018 / Cilt: 1 Sayı: 4

Removal of Cu (II) from wastewater of metal coating process by borax sludge

Esma Burcu RONA
Meral YİLDİRİM OZEN
Emek MOROYDOR DERUN
Pages
1–5
Publication Date
2018-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Langmuir (R2=0.9985) and Temkin (R2=0.9985) isotherms models were the best to explain the process.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study is to determine the adsorption behavior of borax sludge for removal of copper from industrial wastewater.
📊
Key Findings & Data:The borax sludge was generated during borax production and used for treatment of wastewater of metal coating process.
💡
Conclusion & Impact:Langmuir (R2=0.9985) and Temkin (R2=0.9985) isotherms models were the best to explain the process.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Adsorption · borax sludge · heavy metal

Abstract

The aim of this study is to determine the adsorption behavior of borax sludge for removal of copper from industrial wastewater. The borax sludge was generated during borax production and used for treatment of wastewater of metal coating process. The parameters of pH, concentration and contact time were investigated in batch experiments to determine the efficiency of adsorption. Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) was used to calculate the reduced amount of Cu (II). The results were applied to various kinetic models and adsorption isotherms. The pseudo second order model was successful to fit the adsorption process in the kinetic study because the regression coefficient values (R2) were changed between 0.9995 and 0.9978. Langmuir (R2=0.9985) and Temkin (R2=0.9985) isotherms models were the best to explain the process.

🔖

Cite This Article

RONA, E. B., OZEN, M. Y., DERUN, E. M. (2018). Removal of Cu (II) from wastewater of metal coating process by borax sludge. Environmental Research and Technology, Cilt: 1 Sayı: 4, 1–5. https://ajindex.com/articles/904916

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. . F. Fu and Q. Wang, “Removal of heavy metal ions from wastewaters: a review,” Journal of Environmental Management, Vol. 92, pp. 407–418, 2011. [2]. H. D. Özsoy and H. Kumbur, “Endüstriyel atıksulardan adsorpsiyon yöntemi ile ağır metal gideriminde kullanılan çeşitli adsorbanlar ve giderim verimleri,” in Proc. Ulusal Çevre Sempozyumu, Mersin, Turkey, 2007 (In Turkish). [3]. D. Marani, G. Macci and M. Pagano, “Lead precipitation in the presence of sulfate and carbonate- testing of thermodynamic predictions,” Water Research, Vol. 29, pp. 1085-1092, 1995. [4]. M. P. Papini, Y. D. Kahie, B. Troia and M. Majone, “Adsorption of lead at variable pH onto a natural porous medium: modeling of batch and column experiments,” Environmental Science and Technology, Vol. 33, pp. 3357-4464, 1999. [5]. A. T. Paulino, F. A. Minasse, M. R. Guilherme, A. V. Reis, E. C. Muniz and J. Nozaki, “Novel adsorbent based on silkworm chrysalides for removal of heavy metals from wastewaters,” Journal of Colloid and Interface Science, Vol. 301, pp. 479–487, 2006. [6]. S. A. Mirbagheri and S. N. Hosseini, “Pilot plant investigation on petrochemical wastewater treatment for the removal of copper and chromium with the objective of reuse,” Desalination, Vol. 171, pp. 85–93, 2005. [7]. O. Hamdaoui, “Removal of copper (II) from aqueous phase by purolite C100-MB cation exchange resin in fixed bed columns: modeling,” Journal of Hazardous Materials, Vol. 161, pp. 737–746, 2009. [8]. F. Akbal and S. Camcı, “Copper, chromium and nickel removal from metal plating wastewater by electrocoagulation,” Desalination, Vol. 269, pp. 214–222, 2011. [9]. E. L. Cochrane, S. Lu, S. W. Gibb and I. Villaescusa, “A comparison of low-cost biosorbents and commercial sorbents for the removal of copper from aqueous media,” Journal of Hazardous Materials, Vol. 137, pp. 198-206, 2006. [10]. H. Sis and T. Uysal, “Removal of heavy metal ions from aqueous medium using Kuluncak (Malatya) vermiculites and effect of precipitation on removal,” Applied Clay Science, Vol. 95, pp. 1–8, 2014. [11]. M. Irani, M. Amjadi, M. A. Mousavian, “Comparative study of lead sorption onto natural perlite, dolomite and diatomite,” Chemical Engineering Journal, Vol. 178, pp. 317–323, 2011. [12]. K. G. Bhattacharyya and S. S. Gupta, “Removal of Cu(II) by natural and acid-activated clays: an insight of adsorption isotherm, kinetic and thermodynamics,” Desalination, Vol. 272, pp. 66–75, 2011. [13]. O. Yavuz, Y. Altunkaynak and F. Guzel, “Removal