Journals / Environmental Research and Technology / 2023 / Cilt: 6 Sayı: 1

Sustainability improvement by utilizing polymer waste as an energy source for a diesel engine with alcohol additives

Pages
35–45
Publication Date
2023-03-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results were further analysed using the design of experiment tool, "Full Factorial Design" to determine the most optimal running condition with fuel consumption of 0.4508 kg/kWh, hydrocarbon of 49 ppm and carbon monoxide 0.265% at half load conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Energy and fossil fuel supplies have been threatened by the depletion of fossil fuels on a global scale, as well as by the constant rise in oil prices and the continual increase in environmental degradation.
📊
Key Findings & Data:On the other hand, polymer waste has increased due to its usage in a daily lifestyle because of its cheap cost, ease of production, and adaptability.
💡
Conclusion & Impact:The results were further analysed using the design of experiment tool, "Full Factorial Design" to determine the most optimal running condition with fuel consumption of 0.4508 kg/kWh, hydrocarbon of 49 ppm and carbon monoxide 0.265% at half load conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Waste to energy · polyethylene polymer · diesel engine

Abstract

Energy and fossil fuel supplies have been threatened by the depletion of fossil fuels on a global scale, as well as by the constant rise in oil prices and the continual increase in environmental degradation. On the other hand, polymer waste has increased due to its usage in a daily lifestyle because of its cheap cost, ease of production, and adaptability. Indirectly, these polymer wastes are causing some major problems for the ecosystem and other living things. By transforming waste polymers into usable energy, can address for both the non-biodegradability of polymers and the need for an alternative fuel. This research paper aims to evaluate the performance of fuel produced by the pyrolysis of polyethylene polymer. Three distinct alcohol additive blends with polymer fuel were investigated in a single-cylinder direct injection diesel engine for their performance and emission characteristics. The engine efficiency of pentanol was found to be about 3.4% higher than that of base diesel, and with 7% better fuel consumption. Additionally, alcohol additives reduced CO emissions by 3.6%–3.8% and HC emissions by 3.5%–3.8%. The results were further analysed using the design of experiment tool, "Full Factorial Design" to determine the most optimal running condition with fuel consumption of 0.4508 kg/kWh, hydrocarbon of 49 ppm and carbon monoxide 0.265% at half load conditions.

🔖

Cite This Article

SAMBANDAM, P., T, V. K., MAHALİNGAM, S., S, G., K, G. (2023). Sustainability improvement by utilizing polymer waste as an energy source for a diesel engine with alcohol additives. Environmental Research and Technology, Cilt: 6 Sayı: 1, 35–45. https://ajindex.com/articles/904907

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. V. Gnanamoorthi and M. Murugan, “Effect of DEE and MEA as additives on a CRDI diesel engine fueled with waste plastic oil blend,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 0, no. 0, pp. 1–16, 2019, doi: 10.1080/15567036.2019.1657206
  2. P. Bridjesh, P. Periyasamy, A. V. Krishna Chaitanya, and N. K. Geetha, “MEA and DEE as additives on diesel engine using waste plastic oil diesel blends,” Sustain. Environ. Res., vol. 28, no. 3, pp. 142–147, 2018, doi: 10.1016/j.serj.2018.01.001
  3. J. Gong, X. Chen, and T. Tang, “Recent progress in controlled carbonization of (waste) polymers,” Prog. Polym. Sci., vol. 94, pp. 1–32, Jul. 2019, doi: 10.1016/J.PROGPOLYMSCI.2019.04.001
  4. H. Y. Kim, J. C. Ge, and N. J. Choi, “Effects of Ethanol–Diesel on the Combustion and Emissions from a Diesel Engine at a Low Idle Speed,” Applied Sciences, vol. 10, no. 12. 2020. doi: 10.3390/app10124153
  5. S. Ravi and A. Karthikeyan, “Effect of propanol addition on the performance and emissions characteristics of a direct injection diesel engine fuelled with waste plastic oil,” Int. J. Ambient Energy, pp. 1–6, Oct. 2019, doi: 10.1080/01430750.2019.1670728
  6. N. Jeyakumar and B. Narayanasamy, “Investigation of performance, emission, combustion characteristics of municipal waste plastic oil fueled diesel engine with nano fluids,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 00, no. 00, pp. 1–22, 2020, doi: 10.1080/15567036.2020.1745958
  7. P. R. Srivathsan, P. Terrin Babu, V. N. Banugopan, S. Prabhakar, and K. Annamalai, “Experimental investigation on a low heat rejection engine,” Proc. Int. Conf. Front. Automob. Mech. Eng. - 2010, FAME-2010, pp. 122–127, 2010, doi: 10.1109/FAME.2010.5714815
  8. S. Ellappan and B. Pappula, “Utilization of unattended waste plastic oil as fuel in low heat rejection diesel engine,” Sustain. Environ. Res., vol. 1, no. 1, pp. 1–9, 2019, doi: 10.1186/s42834-019-0006-7
  9. B. Govinda Rao, Y. Datta Bharadwaz, C. Virajitha, and V. Dharma Rao, “Effect of injection parameters on the performance and emission characteristics of a variable compression ratio diesel engine with plastic oil blends – An experimental study,” Energy Environ., vol. 29, no. 4, pp. 492–510, 2018, doi: 10.1177/0958305X17753208
  10. D. Damodharan, A. P. Sathiyagnanam, D. Rana, S. Saravanan, B. Rajesh Kumar, and B. Sethuramasamyraja, “Effective utilization of waste plastic oil in a direct injection diesel engine using high carbon alcohols as oxygenated addit