Journals / Current Research in Dental Sciences / 2018 / Cilt: 28 Sayı: 4

HİBRİT CAD/CAM MATERYALLERİNİN FİZİKSEL VE OPTİK ÖZELLİKLERİNİN DEĞERLENDİRİLMESİ

Pages
498–503
Publication Date
2018-10-14
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Sonuçlar: CAD/CAM hibrit materyallerin farklı içerik- lere sahip olması fiziksel ve optik özelliklerini etkileyebilir.   *    Trakya Üniversitesi Diş Hekimliği Fakültesi Protetik Diş Tedavisi AD, Edirne .   ** Mariehallsvagen 16, 16865 Stockholm- İsveç      

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Amaç: Günümüzde bilgisayar destekli tasarım/ bilgisayar destekli üretim (CAD/CAM) sistemleri ile farklı fiziksel ve optik özelliklere sahip materyaller kullanılmaktadır.
📊
Key Findings & Data:Bu çalışmanın amacı farklı içeriklere sahip CAD/CAM hibrit materyallerin fiziksel ve optik özelliklerinin araştırılmasıdır.
💡
Conclusion & Impact:Sonuçlar: CAD/CAM hibrit materyallerin farklı içerik- lere sahip olması fiziksel ve optik özelliklerini etkileyebilir.   *    Trakya Üniversitesi Diş Hekimliği Fakültesi Protetik Diş Tedavisi AD, Edirne .   ** Mariehallsvagen 16, 16865 Stockholm- İsveç      
🔬Design:Experimental Field Trial
📍Scope:30 adet
⚙️Variables:CAD/CAM materyalleri · yüzey pürüzlülüğü · yüzey sertliği

Özet

Amaç: Günümüzde bilgisayar destekli tasarım/ bilgisayar destekli üretim (CAD/CAM) sistemleri ile farklı fiziksel ve optik özelliklere sahip materyaller kullanılmaktadır. Endikasyonlar dikkate alındığında CAD/CAM sistemler ile kullanılan bu materyallerin seçimi hekimi zorlayabilir. Bu çalışmanın amacı farklı içeriklere sahip CAD/CAM hibrit materyallerin fiziksel ve optik özelliklerinin araştırılmasıdır. Gereç ve Yöntem: İçerikleri birbirinden farklı 3 CAD/CAM hibrit materyali (Vita Enamic, Vita Suprinity, GC Cerasmart) test edildi. Tüm test edilen materyaller A1 renkli ve yüksek translusensiye sahipti. Her bir CAD/CAM hibrit materyal bloğundan 12x 10x 1 mm ebatlarında toplam 30 adet dikdörtgen örnek hazırlandı (n=10). Yaşlandırma işlemi 5°C ile 55°C, 5000 devir, 30 saniye bekletme süresi ile gerçekleştirildi. Termal döngü işlemi öncesi ve sonrasında yüzey pürüzlülüğü, sertliği ölçüldü. Spektrofotometre kullanılarak renk de- ğişimi ve translusensi parametresi ölçüldü. Örneklerin CIELAB koordinatlarında (L*, a* ve b*) renk değerleri termal döngü öncesi ve sonrasında kaydedildi. Renk değişimi verilerinin analizi için ise tek yönlü varyans analizi (ANOVA) kullanılırken diğer parametreler için bağımlı örneklem t testi kullanıldı. Bulgular: Yüzey pürüzlülüğü için her grup kendi için- de değerlendirildiğinde termal döngü öncesi ve sonrası değerleri arasında fark bulunmamıştır (p>0,05). Fakat Cerasmart grubunun termal döngü sonrası yüzey sert- liği değerleri, başlangıç değerlerinden anlamlı derece- de farklı bulunmuştur (p<0,001). Translusensi için her grup kendi içinde değerlendirildiğinde termal döngü öncesi ve sonrası değerleri arasında fark görülmemiştir (p>0,05). Fakat Cerasmart grubu en yüksek renk değişimini göstermiştir (p<0,001). Sonuçlar: CAD/CAM hibrit materyallerin farklı içerik- lere sahip olması fiziksel ve optik özelliklerini etkileyebilir. &nbsp; * &nbsp;&nbsp; Trakya Üniversitesi Diş Hekimliği Fakültesi Protetik Diş Tedavisi AD, Edirne . &nbsp; ** Mariehallsvagen 16, 16865 Stockholm- İsveç &nbsp; &nbsp; &nbsp;

🔖

Cite This Article

Kurt, A., Çelik, G. (2018). HİBRİT CAD/CAM MATERYALLERİNİN FİZİKSEL VE OPTİK ÖZELLİKLERİNİN DEĞERLENDİRİLMESİ. Current Research in Dental Sciences, Cilt: 28 Sayı: 4, 498–503. https://doi.org/10.17567/ataunidfd.473860

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (18)

  1. Stawarczyk B, Liebermann A, Eichberger M, Güth JF. Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites. J Mech Behav Biomed Mater 2015; 55: 1-11.
  2. Duarte S, Sartori N, Phark JH. Ceramic-Reinforced Polymers: CAD/CAM Hybrid Restorative Materials. Curr Oral Health Rep 2016; 3: 198-202.
  3. Teughels W, Van Assche N, Sliepen I, Quirynen M. Effect of material characteristics and or surface topography on biofilm development. Clinical Oral Implants Research 2006; 17: 68-81.
  4. Jones CS, Billington RW, Pearson GJ. The in vivo perception of roughness of restorations. British Dent J 2004; 196: 42-5.
  5. Mörmann WH, Stawarczyk B, Ender A, Sener B, Attin T, Mehl A. Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. J Mech Behav Biomed Mater 2013; 20: 113-25.
  6. Gutiérrez-Salazar MD, Reyes-Gasga J. Microhardness and chemical composition of human tooth. Materials Research 2003; 6: 367-73.
  7. Kelly JR, Benetti P. Ceramic materials in dentistry: historical evolution and current practice. Aust Dent J 2011; 56: 84–96.
  8. Koizumi H, Saiki O, Nogawa H, Hiraba H, Okazaki T, Matsumura H. Surface roughness and gloss of current CAD/CAM resin composites before and after toothbrush abrasion. Dent Mater J 2015; 34: 881-7.
  9. Lauvahutanon S, Takahashi H, Shiozawa M, Iwasaki N, Asakawa Y, Oki M, Finger WJ, Arksornnukit M. Mechanical properties of composite resin blocks for CAD/CAM. Dent Mater J 2014; 33: 705-10.
  10. Liebermann A, Wimmer T, Schmidlin PR, Scherer H, Löffler P, Roos M, Stawarczyk B. Physicomec- hanical characterization of polyetheretherketone and current esthetic dental CAD/CAM polymers after aging in different storage media. J Prosthet Dent 2016; 115: 321-8.
  11. Awad D, Stawarczyk B, Liebermann A, Ilie N. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent 2015; 113: 534-40.
  12. Paravina R, Powers J. Esthetic color training in dentistry. 1 ed. St. Louis; CV Mosby: 2004. p. 17-38.
  13. Czasch P, Ilie N. In vitro comparison of mechanical properties and degree of cure of bulk fill composites. Clin Oral Investig 2013; 17: 227-35.
  14. Ertürk BK, Çömlekoğlu MD, Çömlekoğlu E, Güngör MA. Sabit protetik restorasyonlarda kullanılan güncel tasarım ve üretim yöntemleri. Atatürk Üniv Diş Hek Fak Derg 2015;25: 135-43.
  15. Acar O, Yilmaz B, Altintas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent 2016; 115: 71-5.
  16. Della Bona A, Nogueira AD, Pecho OE. Optical properties of CAD-CAM ceramic systems. J Dent 2014; 42: 1202-9.
  17. Lee YK, Lim BS, Rhee SH, Yang HC, Powers JM. Color and translucency of A2 shade resin composites after curing, polishing and thermocycling. Oper Dent 2005; 30: 436-42.
  18. Mandikos MN, McGivney GP, Davis E, Bush PJ, Carter JM. A comparison of the wear resistance and hardness of indirect composite resins. J Prosthet Dent 2001; 85: 386-95.