Journals / Current Research in Dental Sciences / 2022 / Cilt: 32 Sayı: 1

FARKLI KONSANTRASYONLARDAKİ POVİDON İYOTUN HİBRİT CAD/CAM MATERYALİNİN RENK STABİLİTESİNE ETKİSİ

FARKLI KONSANTRASYONLARDAKİ POVİDON İYOTUN HİBRİT CAD/CAM MATERYALİNİN RENK STABİLİTESİNE ETKİSİ

Pages
75–79
Publication Date
2022-02-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Keywords: hybrid ceramic, povidone iodine, color change

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Amaç: Bu çalışmanın amacı, farklı konsantrasyonlardaki povidon iyot solüsyonlarının hibrit seramik CAD/CAM materyalinin renk stabilitesine etkisinin incelenmesidir.
📊
Key Findings & Data:Yöntemler: Çalışmada 2M2 rengine sahip Cerasmart (GC Corporation, Tokyo, Japonya) hibrit seramik bilgisayar destekli tasarım/bilgisayar destekli üretim (CAD/CAM) bloklarından 1,5x12x12mm boyutunda 60 adet kesit elde edildi.
💡
Conclusion & Impact:Keywords: hybrid ceramic, povidone iodine, color change
🔬Design:Experimental Field Trial
📍Scope:60 adet
⚙️Variables:hibrit seramik · CAD/CAM · povidon iyot

Abstract

Amaç: Bu çalışmanın amacı, farklı konsantrasyonlardaki povidon iyot solüsyonlarının hibrit seramik CAD/CAM materyalinin renk stabilitesine etkisinin incelenmesidir. Yöntemler: Çalışmada 2M2 rengine sahip Cerasmart (GC Corporation, Tokyo, Japonya) hibrit seramik bilgisayar destekli tasarım/bilgisayar destekli üretim (CAD/CAM) bloklarından 1,5x12x12mm boyutunda 60 adet kesit elde edildi. Örneklerin başlangıç renk değerleri spektrofotometre cihazı ile CIE L*a*b* sistemine göre ölçüldü. Örnekler 24 saat süreyle bekletilecekleri solüsyonlara göre rastgele 3 gruba ayrıldı (n=20). Grup 1 kontrol grubu olarak belirlendi ve örnekler distile suda bekletildi. Grup 2’de örnekler %0,25’lik povidon iyot solüsyonunda bekletildi. Grup 3’de ise örnekler %2,5’lik povidon iyot solüsyonunda bekletildi. Örnekler temizlendi ve renk değerleri tekrar ölçüldü. Renk değişim miktarları ΔE cinsinden hesaplandı. Elde edilen verilerin istatistiksel analizi Kruskal-Wallis testi ile yapıldı. Bulgular: Poivdon iyot solüsyonunda bekletilen örneklerde anlamlı derecede yüksek ΔE değerleri elde edildi (P < .05). %2,5’lik povidon iyot grubu %0.25’lik povidon iyot grubuna göre anlamlı derecede daha yüksek ΔE değerleri gösterdi (P < .05). %0,25’lik povidon iyot solüsyon grubunda elde edilen renk değişimi klinik olarak kabul edilebilir bulundu. Sonuç: Povidon iyot solüsyonu rezin seramik CAD/CAM materyali üzerinde renk değişimine neden olmaktadır. Povidon iyotun daha yüksek konsantrasyonunda daha fazla renk değişimi izlenmektedir. Anahtar kelimeler: hibrit seramik, CAD/CAM, povidon iyot, renk değişimi Effect of povidone iodine at different concentrations on the color stability of hybrid CAD/CAM material Abstract Objective: The aim of this study was to investigate the effect of different concentrations of povidone iodine solutions on the color stability of hybrid ceramic CAD/CAM material. Methods: In the study, 60 sections with dimensions of 1,5x12x12mm were obtained from Cerasmart (GC Corporation, Tokyo, Japan) hybrid ceramic computer aided desing/computer aided manufacturing (CAD/CAM) blocks with 2M2 color. The initial color values of the sections were measured with a spectrophotometer device according to the CIE L*a*b* system. Samples were randomly divided into 3 groups according to the solutions that they strored for 24 hours (n=20). Group 1 was determined as a control group and samples were kept in distilled water. In group 2, samples were kept in 0,25% povidone iodine solution. In group 3, samples were kept in 2,5% povidone iodine solution. The samples were cleaned and the color values were measured again. Color changes were calculated in ΔE. Statistical analysis of the data obtained was made using the Kruskal-Wallis test. Results: Significantly higher ΔE values were obtained in samples kept in povidone iodine solution (P < .05). The 2,5% povidone iodine group showed significantly higher ΔE values than the 0,25% povidone iodine group (P < .05). The color change obtained in the 0,25% povidone iodine solution group was found clinically acceptable. Conclusion: Povidone iodine solution caused color change on the resin ceramic CAD/CAM material. More color change was observed at higher concentrations of povidone iodine. Keywords: hybrid ceramic, povidone iodine, color change

Özet

Amaç: Bu çalışmanın amacı, farklı konsantrasyonlardaki povidon iyot solüsyonlarının hibrit seramik CAD/CAM materyalinin renk stabilitesine etkisinin incelenmesidir. Yöntemler: Çalışmada 2M2 rengine sahip Cerasmart (GC Corporation, Tokyo, Japonya) hibrit seramik bilgisayar destekli tasarım/bilgisayar destekli üretim (CAD/CAM) bloklarından 1,5x12x12mm boyutunda 60 adet kesit elde edildi. Örneklerin başlangıç renk değerleri spektrofotometre cihazı ile CIE L*a*b* sistemine göre ölçüldü. Örnekler 24 saat süreyle bekletilecekleri solüsyonlara göre rastgele 3 gruba ayrıldı (n=20). Grup 1 kontrol grubu olarak belirlendi ve örnekler distile suda bekletildi. Grup 2’de örnekler %0,25’lik povidon iyot solüsyonunda bekletildi. Grup 3’de ise örnekler %2,5’lik povidon iyot solüsyonunda bekletildi. Örnekler temizlendi ve renk değerleri tekrar ölçüldü. Renk değişim miktarları ΔE cinsinden hesaplandı. Elde edilen verilerin istatistiksel analizi Kruskal-Wallis testi ile yapıldı. Bulgular: Poivdon iyot solüsyonunda bekletilen örneklerde anlamlı derecede yüksek ΔE değerleri elde edildi (P < .05). %2,5’lik povidon iyot grubu %0.25’lik povidon iyot grubuna göre anlamlı derecede daha yüksek ΔE değerleri gösterdi (P < .05). %0,25’lik povidon iyot solüsyon grubunda elde edilen renk değişimi klinik olarak kabul edilebilir bulundu. Sonuç: Povidon iyot solüsyonu rezin seramik CAD/CAM materyali üzerinde renk değişimine neden olmaktadır. Povidon iyotun daha yüksek konsantrasyonunda daha fazla renk değişimi izlenmektedir. Anahtar kelimeler: hibrit seramik, CAD/CAM, povidon iyot, renk değişimi Effect of povidone iodine at different concentrations on the color stability of hybrid CAD/CAM material Abstract Objective: The aim of this study was to investigate the effect of different concentrations of povidone iodine solutions on the color stability of hybrid ceramic CAD/CAM material. Methods: In the study, 60 sections with dimensions of 1,5x12x12mm were obtained from Cerasmart (GC Corporation, Tokyo, Japan) hybrid ceramic computer aided desing/computer aided manufacturing (CAD/CAM) blocks with 2M2 color. The initial color values of the sections were measured with a spectrophotometer device according to the CIE L*a*b* system. Samples were randomly divided into 3 groups according to the solutions that they strored for 24 hours (n=20). Group 1 was determined as a control group and samples were kept in distilled water. In group 2, samples were kept in 0,25% povidone iodine solution. In group 3, samples were kept in 2,5% povidone iodine solution. The samples were cleaned and the color values were measured again. Color changes were calculated in ΔE. Statistical analysis of the data obtained was made using the Kruskal-Wallis test. Results: Significantly higher ΔE values were obtained in samples kept in povidone iodine solution (P < .05). The 2,5% povidone iodine group showed significantly higher ΔE values than the 0,25% povidone iodine group (P < .05). The color change obtained in the 0,25% povidone iodine solution group was found clinically acceptable. Conclusion: Povidone iodine solution caused color change on the resin ceramic CAD/CAM material. More color change was observed at higher concentrations of povidone iodine. Keywords: hybrid ceramic, povidone iodine, color change

🔖

Cite This Article

SAĞLAM, G. (2022). FARKLI KONSANTRASYONLARDAKİ POVİDON İYOTUN HİBRİT CAD/CAM MATERYALİNİN RENK STABİLİTESİNE ETKİSİ. Current Research in Dental Sciences, Cilt: 32 Sayı: 1, 75–79. https://ajindex.com/articles/900887

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Davidowitz G, Kotick PG. The use of CAD/CAM in dentistry. Dent Clin North Am. 2011;55(3):559-570
  2. Pop-Ciutrila IS, Dudea D, Eugenia Badea M, Moldovan M, Cîmpean SI, Ghinea R. Shade Correspondence, Color, and Translucency Differences between Human Dentine and a CAD/CAM Hybrid Ceramic System. J Esthet Restor Dent. 2016;28(1):46-55
  3. Dalpino PH, Francischone CE, Ishikiriama A, Franco EB. Fracture resistance of teeth directly and indirectly restored with composite resin and indirectly restored with ceramic materials. Am J Dent. 2002;15(6):389-394
  4. Available form: GC Cerasmart Product Description. 2014;800.323.7063 www.gcamerica.com
  5. Dietschi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites: an in vitro study. Dent Mater. 1994;10(6):353-362
  6. Derafshi R, Khorshidi H, Kalantari M, Ghaffarlou I. Effect of mouthrinses on color stability of monolithic zirconia and feldspathic ceramic: an in vitro study. BMC Oral Health. 2017;17(1):129
  7. Peng X, Xu X, Li Y, Cheng L, Zhou X, Ren B. Transmission routes of 2019-nCoV and controls in dental practice. Int J Oral Sci. 2020;12(1):9
  8. Carrouel F, Conte MP, Fisher J, et al. COVID-19: A Recommendation to Examine the Effect of Mouthrinses with β-Cyclodextrin Combined with Citrox in Preventing Infection and Progression. J Clin Med. 2020;9(4):1126
  9. O’Donnell VB, Thomas D, Stanton R, Maillard JY, Murphy RC, Jones SA, Humphreys I, Wakelam MJO, Fegan C, Wise MP, Bosch A, Sattar SA. Potential Role of Oral Rinses Targeting the Viral Lipid Envelope in SARS-CoV-2 Infection. Function (Oxf). 2020;1(1):zqaa002
  10. Bidra AS, Pelletier JS, Westover JB, Frank S, Brown SM, Tessema B. Rapid In-Vitro Inactivation of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) Using Povidone-Iodine Oral Antiseptic Rinse. J Prosthodont. 2020;29(6):529-533
  11. Foley TP Jr. The relationship between auto immune thyroid disease and iodine intake: a review. Endokrynol Pol. 1992;43:53-69
  12. Furudate S, Nishimaki T, Muto T. 125I uptake competing with iodine absorption by the thyroid gland following povidone-iodine skin application. Exp Anim. 1997;46(3):197-202
  13. Ruyter IE, Nilner K, Moller B. Color stability of dental composite resin materials for crown and bridge veneers. Dent Mater. 1987;3(5):246-251
  14. Eggers M, Koburger-Janssen T, Eickmann M, Zorn J. In Vitro Bactericidal and Virucidal Efficacy of Povidone-Iodine Gargle/Mouthwash Against Respiratory and Oral Tract Pat