SavedAdd your journal

Journals / Sigma Journal of Engineering and Natural Sciences / 2019 / Cilt: 37 Sayı: 2

MODELING AND OPTIMIZATION OF THE ORIGINAL OFFSET ON THE NC MACHINE TOOL

Farouk MESSAOUD
Mohamed RAHOU
Fethi SEBAA
Pages
380–392
Publication Date
2019-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this section the defects were modeled by the least square edit method.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Currently the trajectories of the cutting tool play an important role in optimizing the manufacturing time and the machining quality (roughness, manufacturing tolerances, etc.).The purpose of this paper is to develop an approach for the manufacturing tolerances optimization under the effect of the cutting tool trajectory.
📊
Key Findings & Data:This work is organized around two axes.
💡
Conclusion & Impact:In this section the defects were modeled by the least square edit method.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Optimization · modeling · manufacturing tolerances

Abstract

Currently the trajectories of the cutting tool play an important role in optimizing the manufacturing time and the machining quality (roughness, manufacturing tolerances, etc.).The purpose of this paper is to develop an approach for the manufacturing tolerances optimization under the effect of the cutting tool trajectory. This work is organized around two axes. In the first axis, an experimental study was conducted to determine the cutting tool path with less error. The second axis is devoted to modeling and real-time optimization of the cutting tool path defects. In this section the defects were modeled by the least square edit method.

🔖

Cite This Article

MESSAOUD, F., RAHOU, M., SEBAA, F. (2019). MODELING AND OPTIMIZATION OF THE ORIGINAL OFFSET ON THE NC MACHINE TOOL. Sigma Journal of Engineering and Natural Sciences, Cilt: 37 Sayı: 2, 380–392. https://ajindex.com/articles/897608

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Chanda, L., Cripps, R. J. (2018). Characterising the effects of shape on tool path motion. International Journal of Machine Tools and Manufacture, 132, 17-35
  2. Del Sol, I., Rivero, A., Salguero, J., Fernández-Vidal, S. R., Marcos, M. (2017). Tool-path effect on the geometric deviations in the machining of UNS A92024 aeronautic skins. Procedia Manufacturing, 13, 639-646.
  3. Zhong, L., Bi, Q., Huang, N., Wang, Y. (2018). Dynamic accuracy evaluation for five-axis machine tools using S trajectory deviation based on R-test measurement. International Journal of Machine Tools and Manufacture, 125, 20-33.
  4. He, G., Sang, Y., Wang, H., Sun, G. (2018). A profile error evaluation method for freeform surface measured by sweep scanning on CMM. Precision Engineering.
  5. Jia, Z. Y., Zhao, X. X., Ma, J. W., Chen, S. Y., Qin, F. Z., Liu, Z. (2019). Toolpath generation in sub-regional processing with constraint of constant scallop-height at boundary for complex curved surface. Precision Engineering, 55, 217-230.
  6. Lazoglu, I., Manav, C., Murtezaoglu, Y. (2009). Tool path optimization for free form surface machining. CIRP annals, 58(1), 101-104.
  7. Pezer, D. (2016). Efficiency of Tool Path Optimization Using Genetic Algorithm in Relation to the Optimization Achieved with the CAM Software. Procedia Engineering, 149, 374-379.
  8. Ma, J. W., Jia, Z. Y., Song, D. N., Wang, F. J., Si, L. K. (2018). Machining error reduction by combining of feed-speed optimization and toolpath modification in high-speed machining for parts with rapidly varied geometric features. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(4), 557-571.
  9. Zhang, X., Zhang, J., Zheng, X., Pang, B., Zhao, W. (2017). Tool orientation optimization of 5-axis ball-end milling based on an accurate cutter/workpiece engagement model. CIRP Journal of Manufacturing Science and Technology, 19, 106-116.
  10. Yuen, A., Altintas, Y. (2016). Trajectory generation and control of a 9 axis CNC micromachining center. CIRP Annals, 65(1), 349-