Journals / Research in Agricultural Sciences / 2020 / Cilt: 51 - Sayı: 3

Physical Characteristics and Nutritional Quality of Chickpea in the Process of Roasted Chickpea Production

Kavrulmuş Nohut Üretim Sürecinde Nohudun Fiziksel Özellikleri ve Besinsel Kalitesi

Pages
219–227
Publication Date
2020-09-25
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results of the research, it was determined that the modulus and time of stress relaxation increased from raw chickpea phase to FHT, but decreased from FHT to SHT.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The process of Nokhodchi (roasted chickpea) production includes raw chickpea preparation, First Heat Treatment (FHT), Second Heat Treatment (SHT), Moisture Treatment (MT) and Dehulling and Roasting Treatment (DRT) , respectively.
📊
Key Findings & Data:According to the results of the research, it was determined that the modulus and time of stress relaxation increased from raw chickpea phase to FHT, but decreased from FHT to SHT.
💡
Conclusion & Impact:The results showed that during the roasting process the crude fat increased, resulting in an increase in the nutritional quality of Nokhodchi.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kabuk çıkarma · Stres gevşeme · Besinsel kalite

Abstract

The process of Nokhodchi (roasted chickpea) production includes raw chickpea preparation, First Heat Treatment (FHT), Second Heat Treatment (SHT), Moisture Treatment (MT) and Dehulling and Roasting Treatment (DRT) , respectively. In this study; Time-dependent mechanical behavior of chickpeas under pressure load has been studied based on rheological theories. According to the results of the research, it was determined that the modulus and time of stress relaxation increased from raw chickpea phase to FHT, but decreased from FHT to SHT. It was determined that the module and time of stress relaxation, increased from MT phase to Nokhodchi phase. The volume of Nokhodchi increased by 20% compared to the raw chickpea and showed a lower resistance. The results showed that during the roasting process the crude fat increased, resulting in an increase in the nutritional quality of Nokhodchi.

Özet

Nokhodchi (kavrulmuş nohut) üretim prosesinde sırası ile çiğ nohut hazırlama, ilk ısıl işlem (FHT), ikinci ısıl işlem (SHT), nemlendirme (MT), kabuk çıkarma ve kavurma (DRT) işlemleri yer almaktadır. Bu çalışmada; nohutun basınç yükü altında zamana bağlı mekanik davranışı, reolojik teorilere dayanılarak incelenmiştir. Araştırma sonuçlarına göre Modül ve gerilme gevşeme zamanının çiğ nohut fazından FHT'yearttığı, ancak FHT'den SHT'ye ise azaldığı tespit edilmiştir. Modül ve stres gevşeme zamanının MT'den Nokhodchi fazına doğru arttığını belirlenmiştir. Nokhodchi’nin hacmi çiğ nohutla karşılaştırıldığında % 20 oranında artmış ve daha düşük direnç göstermiştir. Sonuçlar, kavurma işlemi sırasında ham yağın arttığını ve buna bağlı olarak Nokhodchi'nin beslenme kalitesinde bir artışa neden olduğunu göstermiştir.

🔖

Cite This Article

ADİBAN, R., GHASSEMZADEH, H. R., HOSSEİNPOUR, A., ARAGHI, F. P. (2020). Physical Characteristics and Nutritional Quality of Chickpea in the Process of Roasted Chickpea Production. Research in Agricultural Sciences, Cilt: 51 - Sayı: 3, 219–227. https://ajindex.com/articles/889979

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Alajaji, S. A., & El-Adawy, T. A. 2006. Nutritional composition of chickpea (Cicer arietinum L.) as affected by microwave cooking and other traditional cooking methods. J. Food Comp. Anal., 19 (8): 806-812.Al-Mashat, S. H., & Zuritz, C. A. 1993. Stress relaxation behavior of apple pomace and effect of temperature, pressing aid and compaction rate on juice yield. J. Food Engin., 20 (3): 247-266.AOAC. 1980. “Official Methods of Analysis” 13th ed. Association of Official Analytical Chemists, Washington, DC.Bargale, P. C., & Irudayaraj, J.1995. Mechanical strength and rheological behavior of barley kernels Int. J. Food Sci. Tech., 30 (5): 609-623.Bargale, P. C., Irudayaraj, J. M., & Marquis, B.1994. Some mechanical properties and stress relaxation characteristics of lentils. Can Agr Eng., 36 (4): 247-255.Boudeghdegh, K., Diella, V., Bernasconi, A., Roula, A., & Amirouche, Y. 2015. Composition effects on the whiteness and physical-mechanical properties of traditional sanitary-ware glaze. J. Eur. Cera. Soc., 35 (13): 3735-3741.Cetin, M. 2007. Physical properties of barbunia bean (Phaseolus vulgaris L. cv. ‘Barbunia’) seed. J. Food Engin., 80 (1): 353-358.Chavan, J. K., Kadam, S. S., Salunkhe, D. K., & Beuchat, L. R. 1987. Biochemistry and technology of chickpea (Cicer arietinum L.) seeds. Crit. Rev. Food Sci. Nut., 25 (2): 107-158Coşkuner, Y., & Karababa, E. 2004. Leblebi: a roasted chickpea product as a traditional Turkish snack food. Food Rev. Int., 20 (3): 257-274.Daur, I., Khan, I. A., & Jahangir, M. 2008. Nutritional quality of roasted and pressure-cooked chickpea compared to raw (Cicer arietinum L.) seeds. Sarhad J. Agric., 24 (1): 117-123.Ghadge, P. N., Vairagar, P. R., & Prasad, K. 2008. Physical properties of chick Pea split (Cicer arietinum L.)” Agric. Engin. Int CIGR. j. 10: 10-17.Ghribi, A. M., Maklouf, I., Blecker, C., Attia, H., & Besbes, S. 2015. Nutritional and compositional study of Desi and Kabuli chickpea (Cicer Arietinum L.) flours from Tunisian cultivars. Adv Food Tech. Nutr. Sci., 1 (2): 38-47.
  2. Herum, F. L., Mensah, J. K., Barre, H. J., & Majidzadeh, K. 1979. Viscoelastic behavior of soybeans due to temperature and moisture content. Trans. ASAE., 22 (5): 1219-1224.Indian Standard: 4333 (Part 3). 2002. Method of analysis of Food Grains.Eşref, I. Ş. I. K., & Halil, Ü. N. A. L. 2007. Moisture-dependent physical properties of white speckled red kidney bean grains. J. Food Engin., 82 (2): 209-216Kasturiba, B., Yamannavar, P. Y., Patil, J. S., P