SavedAdd your journal

Journals / Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi / 2011 / Cilt: 3 - Sayı: 2

An Opto-Coupler and Spark Plug Combination System for Vehicle Engine Ignition

Murtaza AÇIKEL
Isa NAVRUZ
Filiz SARI
Pages
12–14
Publication Date
2011-06-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Compared to the conventional igniters, the field–tests have proven the advantages of the higher mechanical durability and ease of system integration of the prototype presented.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this experimental work, an optoelectronic based prototype, basically a slotted opto-coupler plus a spark plug combination, for vehicle engine is constructed.
📊
Key Findings & Data:Following the initial in- laboratory trials, the prototype is mounted on a one– cylinder motorcycle for the actual operation in the field.
💡
Conclusion & Impact:Compared to the conventional igniters, the field–tests have proven the advantages of the higher mechanical durability and ease of system integration of the prototype presented.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:vehicle engine ignition · opto-couplers · contact breaker

Abstract

In this experimental work, an optoelectronic based prototype, basically a slotted opto-coupler plus a spark plug combination, for vehicle engine is constructed. Following the initial in- laboratory trials, the prototype is mounted on a one– cylinder motorcycle for the actual operation in the field. Compared to the conventional igniters, the field–tests have proven the advantages of the higher mechanical durability and ease of system integration of the prototype presented.

🔖

Cite This Article

AÇIKEL, M., NAVRUZ, I., SARI, F. (2011). An Opto-Coupler and Spark Plug Combination System for Vehicle Engine Ignition. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, Cilt: 3 - Sayı: 2, 12–14. https://ajindex.com/articles/889643

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. O. Kaya., “Motor Ayar ve Bakımı” 8. Edition, Milli Eğitim Basımeviİstanbul, p.p. 61-82, 2003 [2] V.A.W. “Hillier, Fundamentals of Automotive Electronics”, Stanley Thornes, 117-141, 1989. [3] R. Bosch, “Automotive Electric-Electronic Systems”, p.p. 142-158, 1994. [4] S. Hwang, “Simulation of Advance Ignition System for a Four Stroke and Single Cylinder Engine Using Photo and 8751H Microcontroller”, First IEEE Conference on Control Applications, 907-908, 1992. [5] W. Qianjiao, “A Study of Automobile Electromagnetic Disturbance or Noise Source”, IEEE International Symposium on Electromagnetic Compatibility Proceedings, p.p 199-202, 1997. [6] Mitchell International, “Mitchell Electronic Ignition”, 13. Edition, p.p 14-20, 1992. [7] K. Grote, E. K. Atansson, “Springer Handbook of Mechanical Engineering”, Springer, 2009. [8] T. Denton, “Automobile Electrical and Electronic System”, 3. Edition, 2004. [9] H. Can, “Renault 12”, İnkılap Yayınevi, 240-247, 1984 [10] A. E. Schwaller, “Total Automative Technology, 4. Edition, Delmar Cengage Learning”, 2004. [11] T. Tranter, “Motor Cycle Electrics, Newnes Technical Boks”, p.p. 38-48, 1985.