Journals / Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi / 2016 / Cilt: 8 - Sayı: 2

The Selection of Optimum Weld Thickness in Overlapped Types Of Welded Joints Using Genetic Algorithms

Genetik Algoritmayla Bindirmeli Tip Kaynaklı Bağlantılarda Optimum Kaynak Kalınlığı Seçimi

Pages
1–10
Publication Date
2016-06-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The algorithm developed in this way, as it is based on finding the best principle of obtaining the values with respect to variables in a specified range, would optimize the thickness of the overlapped types of welded joints.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, using genetic algorithm the selection of optimum welded joints for normal cutting and momentum shear strength was used.
📊
Key Findings & Data:In order to find the minimization of the objective functions with respect to variables in a specified range, the optimization within the strength calculations of the overlapped types of welded joints for normal cutting and momentum shear strength was obtained.
💡
Conclusion & Impact:The algorithm developed in this way, as it is based on finding the best principle of obtaining the values with respect to variables in a specified range, would optimize the thickness of the overlapped types of welded joints.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Genetik Algoritma · Kaynak Kalınlığı · Bindirmeli Kaynak

Abstract

In this study, using genetic algorithm the selection of optimum welded joints for normal cutting and momentum shear strength was used. In order to find the minimization of the objective functions with respect to variables in a specified range, the optimization within the strength calculations of the overlapped types of welded joints for normal cutting and momentum shear strength was obtained. The algorithm developed in this way, as it is based on finding the best principle of obtaining the values with respect to variables in a specified range, would optimize the thickness of the overlapped types of welded joints.

Özet

Bu çalışmada, genetik algoritma yoluyla bindirmeli tip kaynaklı bağlantıların, normal kesme ve momentli kesme gerilimleri için en uygun kaynak kalınlığı seçimi yapılmıştır. Belirlenen sınır aralıklarındaki değişkenlerin amaç fonksiyonunu minimum yapmak hedeflenmiştir. Kaynaklı bağlantının yükleme şekline göre, mukavemet hesapları dâhilinde en uygun değerler elde edilmiştir. Makine elemanları mukavemet hesapları bu tür algoritmalar kullanılarak boyutlandırma optimizasyonuna gidilmektedir. Bu şekilde geliştirilmiş olan algoritma, bir genetik süreç gibi en iyiyi bulma ilkesine dayanmaktadır. Değişkenlerin aldıkları değerler bağlantının boyutlarını sınır aralıklarında olmasını sağlamıştır. Genetik algoritmalar, amaç fonksiyonu değişkenlerini en aza indirmede kullanılmıştır

🔖

Cite This Article

BAŞKAL, T., ÖZBEK, A. (2016). The Selection of Optimum Weld Thickness in Overlapped Types Of Welded Joints Using Genetic Algorithms. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, Cilt: 8 - Sayı: 2, 1–10. https://ajindex.com/articles/889547

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Mendi, F., Külekçi, M.K., Başkal, T., & Bircan, D.A., "Genetik Algoritma (G.A.) Yardımıyla Helis Dişli Çarklarda Optimum Modül Seçimi", Ç.Ü. Müh. Mim. Fak. Dergisi, 23(1), 205-216, 2008.
  2. Akkurt, M., Makine Elemanları Cilt 1-2,
  3. Birsen yayınevi, İstanbul, 2000.
  4. Goldberg, D., Genetic Algorithms in Search, Optimization and Machine Learning. Addison Wesley, New York, 1989.
  5. Chambers, L. D. (Ed.), Practical handbook of genetic algorithms: complex coding systems 3, CRC press., 1998.
  6. Zeyveli, M., "Genetik Algoritmalar ve Mekanik Tasarım Problemleri Uygulamaları", Makine Teknolojileri Elektronik Dergisi, 2, 1-13. 2007.
  7. Bonori, G., Barbieri, M., & Pellicano, F., "Optimum profile modifications of spur gears by means of genetic algorithms", Journal of Sound and Vibration, 313, 603–616, 2008.
  8. Mendi, F., Başkal, T., Boran, K., & Boran, F. E., "Optimization of module, shaft diameter and rolling bearing for spur gear through genetic algorithm", Expert Systems with Applications. 37(12), 8058-8064, 2010.
  9. Dhafer, G., Jérôme, B., Philippe, V., Michel, O., & Haddar, M., Robust optimization of gear tooth modifications using a genetic algorithm. In Condition Monitoring of Machinery in Non-Stationary Operations. Springer Berlin Heidelberg, 589-597, 2012.
  10. Mendi, F., Başkal, T., & Külekci, M.K., "Application of Genetic Algorithm (GA) for Optimum Design of Module. Shaft Diameter and Bearing for Bevel Gearbox", Materials Testing. 54(6), 431-436, 2012.
  11. Başkal, T., Nursoy, M., Esme, U., & Kulekci, M. K., "Application of Genetic Algorithms (GA) for the Optimization of Riveted Joints", Materials Testing, 55(9), 701-705, 2013.
  12. Başkal, T., "Optimization of Screw Elements by Genetic Algorithm", Materials Testing, 56(11-12), 1049-1053, 2014.
  13. Zacharia, P. T., Tsirkas, S. A., Kabouridis, G., & Giannopoulos, G. I., "Planning the construction process of a robotic arm using a genetic algorithm", The International Journal of Advanced Manufacturing Technology, 79(5-8), 1293-1302, 2015.
  14. Pomrehn, L. P., & Papalamb ros, P. Y., "Discrete Optimal Formulation with Application to Gear Train Design", ASME J. of Mech. Design, 117(3), 419-424,1995.
  15. Ognjanovic, M., "Decisions in gear train transmission design", Research in Engineering Design, 8(3), 178-187, 1996.
  16. Chen, M., "Expert system of designing cylindric gear transmission", Journal of Nanjing University of Science and Technology, 22(5), 402-406, 1998.
  17. Deb, K., & Goyal, M., "A flexible optimization procedure for mechanical component design based on geneti