SavedAdd your journal

Journals / Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi / 2017 / Cilt: 9 - Sayı: 3

Energy Consumption Analysis of Sintering Temperature Optimization of Pure Aluminum Powder Metal Compacts Sintered by Using The UHFIS

Mehmet TAŞTAN
Hayrettin GÖKOZAN
Pınar SARI ÇAVDAR
Gürkan SOY
Uğur ÇAVDAR
Pages
174–185
Publication Date
2017-12-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been seen that the cheaper energy cost is obtained by the induction system for sintering application.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, pure aluminum (Al) powder metal (PM) compacts are sintered conventional or induction systems.
📊
Key Findings & Data:PM compacts are sintered by furnace at 600 °C in 60 minutes in the conventional sintering process.
💡
Conclusion & Impact:It has been seen that the cheaper energy cost is obtained by the induction system for sintering application.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Aluminum · Induction · Energy cost

Abstract

In this study, pure aluminum (Al) powder metal (PM) compacts are sintered conventional or induction systems. PM compacts are sintered by furnace at 600 °C in 60 minutes in the conventional sintering process. In the other process, PM compacts are sintered by induction system at seven different sintering temperatures from 550°C to 610°C in 4 minutes. 2.8 kW, 900 kHz ultra-high frequency induction system (UHFIS) used for heating application of induction sintering process. Densities and hardness values are investigated for both processes. During these sintering processes, all energy consumption results are measured and calculated, than compared with each other. The effects of the sintering time increase in the induction sintering process on energy cost have been analyzed. Optimum sintering temperature of the induction sintering process is determined. It has been seen that the cheaper energy cost is obtained by the induction system for sintering application.

🔖

Cite This Article

TAŞTAN, M., GÖKOZAN, H., ÇAVDAR, P. S., SOY, G., ÇAVDAR, U. (2017). Energy Consumption Analysis of Sintering Temperature Optimization of Pure Aluminum Powder Metal Compacts Sintered by Using The UHFIS. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, Cilt: 9 - Sayı: 3, 174–185. https://ajindex.com/articles/889530

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Amirjan, M., Khorsand, H., Siadati, M. H., and Farsani, R. E., “Artificial Neural Network prediction of Cu–Al2O3 composite properties prepared by powder metallurgy method”, Journal of Materials Research and Technology, 2(4), 351-355, 2013
  2. Sedlak, J., Rican, D., Piska, M., and Rozkosny, L., “Study of Materials Produced by Powder Metallurgy Using Classical and Modern Additive Laser Technology”, Procedia Engineering, 100, 1232-1241, 2015
  3. Angelo, P. C., and Subramanian, R., Powder metallurgy: science, technology and applications. PHI Learning Pvt. Ltd., 2008
  4. Pozzoli, V. A., Ruiz, M. S., Kingston, D., and Razzitte, A. C., “Entropy Production during the Process of Sintering”, Procedia Materials Science, 8, 1073-1078, 2015
  5. Caliman, L. B., Bichaud, E., Soudant, P., Gouvea, D., and Steil, M. C., “A simple flash sintering setup under applied mechanical stress and controlled atmosphere”, MethodsX, 2, 392-398, 2015
  6. Kang, S. J. L. Sintering: densification, grain growth and microstructure. Butterworth-Heinemann, 2004
  7. Çavdar, U., and Atik, E., “Investigation of conventional-and induction-sintered iron and iron-based powder metal compacts”, JOM, 66(6), 1027-1034, 2014
  8. Xun, W., Jie, Z., and Qiang, L., “Multi-objective optimization of medium frequency induction heating process for large diameter pipe bending”, Procedia Engineering, 81, 2255-2260, 2014
  9. Gökozan, H., Taştan, M., Taşkin, S., Çavdar, P., and Çavdar, U., “Comparative Energy Consumption Analyses Of an Ultra High Frequency Induction Heating System For Induction Heating, Welding and Sintering Applications” Materials testing, 58, 1009-1013, 2016
  10. Cavdar, P. S., and Cavdar, U., “The evaluation of different environments in ultra-high frequency induction sintered powder metal compacts”, Revista de Metalurgia, 51(1), e036, 2015
  11. Çavdar, U., “Mechanical properties of hot forged ANSI 1050 steel”, Materials Testing, 56(3), 208-212, 2014
  12. Tastan, M., Gokozan, H., Taskin, S., and Çavdar, U., “Comparative energy consumption analyses of an ultra high frequency induction heating system for material processing applications”, Revista de Metalurgia, 51(3), 2015
  13. Çavdar, U., and Gulsahin, I., “Ultra high frequency induction welding of powder metal compacts”, Revista de Metalurgia, 50(2), 2014
  14. Çavdar, U., and Kusoglu, İ. M., “Effects of coil design on induction welding of sintered iron based compacts”, Materials Testing, 56(11-12), 973-979, 2014
  15. Baghani, M.,