Journals / Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi / 2022 / Cilt: 14 - Sayı: 2

Pitch Angle Control of Wind Turbine with PI, PID and GA-PID controller

PI, PID ve GA-PID Kontrolör ile Rüzgâr Türbinin Kanat Hatve Açısı Kontrolü

Pages
502–513
Publication Date
2022-07-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, the output power point (500 KW) is kept at a more optimum level by applying the GA-PID controller.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Today, the share of renewable energy sources in the energy market is on the rise.
📊
Key Findings & Data:The most important of these resources is wind energy.
💡
Conclusion & Impact:In this study, the output power point (500 KW) is kept at a more optimum level by applying the GA-PID controller.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Rüzgar türbini · Genetik algoritma · Optimizasyon

Abstract

Today, the share of renewable energy sources in the energy market is on the rise. The most important of these resources is wind energy. Depending on the wind speed, wind turbine speed control is an important control parameter. This speed parameter must be kept under control in order not to damage the turbine and other important parts at high wind speeds. In this study, a modeling has been made to control the pitch angle of a wind turbine with PI, PID and GA-PID controllers. PI, PID and GA-PID controller methods are used to ensure that the energy system is not damaged at high wind speeds and the effect of variable wind speed on output power remains acceptable. It is aimed to keep the output power constant. The wind turbine was modeled as a simulation in the Matlab/Simulink program. In this study, the output power point (500 KW) is kept at a more optimum level by applying the GA-PID controller.

Özet

Günümüzde yenilenebilir enerji kaynaklarının enerji piyasasındaki payı yükseliş içerisindedir. Bu kaynakların en önemlisi ise rüzgâr enerjisidir. Rüzgâr hızına bağlı olarak rüzgâr türbin hız kontrolü önemli kontrol parametresidir. Bu hız parametresinin yüksek rüzgâr hızlarında türbin ve diğer önemli parçalara zarar vermemesi için denetim altında tutulması gerekmektedir. Bu çalışmada, PI, PID ve GA-PID kontrolör ile bir rüzgâr türbinin hatve açısını kontrol etmek için bir modelleme yapılmıştır. Yüksek rüzgâr hızlarında enerji sistemine zarar verilmemesi ve değişken rüzgâr hızının çıkış gücüne çıkış gücüne etkisinin kabul edilebilir ölçülerde kalmasını sağlamak PI, PID ve GA-PID kontrolör yöntemi kullanılmıştır. Çıkış gücünün sabit tutulması hedeflenmiştir. Matlab/Simulink programında simülasyon olarak rüzgâr türbini modellenmiştir. Bu çalışmada çıkış gücünü noktası (500 KW) GA-PID kontrolörün uygulanmasıyla daha optimum seviyede kalması sağlanmıştır.

🔖

Cite This Article

SOUGUEH, I. M., GÖREL, G. (2022). Pitch Angle Control of Wind Turbine with PI, PID and GA-PID controller. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, Cilt: 14 - Sayı: 2, 502–513. https://ajindex.com/articles/889107

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. Civelek, Z. (2013). Bulanık PID kontrolör ile rüzgâr türbininin hatve açısının kontrolü. Yüksek Lisans Tezi, Kirikkale Üniversitesi,
  2. Kirikkale, Türkiye. Çiftçi, A., & Dursun, M. (2017). Değişken hızlı rüzgâr türbinlerinde kullanılan sabit mıknatıslı senkron generatör ile maksimum güç noktası izleme algoritması. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Volume 5, Issue 2. Civelek, Z., & Lüy, M., & Çam, E., & Görel, G. (2016). A new fuzzy controller for adjusting of pitch angle of wind turbine. The Online Journal of Science and Technology, Volume 6,Issue. Almaz, R. (2020). Değişken kanat açılı düşey eksenli rüzgar türbini tasarımı. Yüksek Lisans Tezi, Dokuz Eylül Üniversitesi,
  3. Izmir, Türkiye. Işik, E. & Ünal, O. (2020). Rüzgar Türbini Kanat Tasarimi ve Analizi. Makina mekanik tasarim projesi, Kocaeli Üniversitesi,
  4. Kocaeli, Türkiye. Kumar, P., Parimi, A., & Rao, U. (2015). Investigation of small pmsg based wind turbine forvariabl wind speed, International Conference on Recent Developments in Control, Automation and Power Engineering (RDCAPE). Ben Jemaa, A. (2015). Coopération méta heuristique et logique floue pour le dimensionnement d'une installation hybride. Thèse pour obtenir le grade de docteur, Université de Reims Champagne-Ardenne, Reims, France. Hamad, C. (2017). Pitch angle control system design for wind turbine. Master thesis, Yüzüncü Yil University, Van, Türkiye. Sami, K. (2018). Modélisation et commande d’un système éolien. Thèse de doctorat, Universite 8 mai 1945
  5. Guelma, Guelma, Algerie. Jourieh, M. (2007). Developpement d’un modele representatif d’une eolienne afin d’etudier l’implantation de plusieurs machines sur un parc eolien. These pour obtenir le grade de Docteur, l’Ecole Nationale Superieure d’Arts et Metiers, Paris, France. Boulegroune, I. (2020). Etude et réalisation d’une turbine éolienne. Mémoire de Fin d'Etudes Master, Université Mohamed Khider Biskra, Biskra, Algerie. Leithead, W., & Connor, B. (2010). Control of variable speed wind turbines: dynamic models. International Journal of Control, Volume 73, Issue 13. Göktaş, M., & Kılıç, F. (2019). Savonius rüzgâr türbini çevresindeki hava akışının hesaplanabilir akışkanlar dinamiği yöntemi ile analizi. Politeknik dergisi 22(1): 11-17, (2019.
  6. Multon, B. (1999). L’énergie électrique: analyse des ressources et de la production, Journées de la section électrotechnique du club EEA 1999, Jan 1999, 22p. (hal-00674084), Paris, France. Baburajan, S., & Ismail, A. (2017). Design and control