SavedAdd your journal

Journals / Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi / 2022 / Cilt: 14 - Sayı: 2

Investigation of the Effect of Temperature and Strain Rate on Mechanical Properties

Sıcaklık ve Deformasyon Hızının Mekanik Özelliklere Etkisinin İncelenmesi

Süleyman KILIÇ
Mehmet Fatih DEMİRDÖĞEN
Pages
406–419
Publication Date
2022-07-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the examinations, it is seen that the change of the temperature and strain rate for these materials have a great effect on the stress and ductility.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The tensile test is one of the most basic and simple tests in which the material is pulled in a single axis until it breaks and allow us to recognize the material from the data obtained from it.
📊
Key Findings & Data:While recognizing materials, their behavior under different temperatures and strain rates is also important.
💡
Conclusion & Impact:In the examinations, it is seen that the change of the temperature and strain rate for these materials have a great effect on the stress and ductility.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Deformasyon hızı · Sıcaklık · Çelik

Abstract

The tensile test is one of the most basic and simple tests in which the material is pulled in a single axis until it breaks and allow us to recognize the material from the data obtained from it. While recognizing materials, their behavior under different temperatures and strain rates is also important. Especially in the manufacturing industry, there are many different production and shaping methods, and each has its own characteristics. For example, in the hot deep drawing process, the mechanical properties of the material can be determined by hot tensile tests. At the same time, this situation has become more important with the development of finite element analysis programs. Because modeling under the same conditions is very effective on the accuracy of the results. In this study, the effects of temperature and strain rate on tensile properties are investigated in steel, titanium, aluminum and nickel alloys. In the examinations, it is seen that the change of the temperature and strain rate for these materials have a great effect on the stress and ductility.

Özet

Çekme testi, malzemenin kopana dek tek eksende çekildiği ve buradan elde edilen verilerden malzemeyi tanımamızı sağlayan en temel ve basit testlerden biridir. Malzemeleri tanırken onların farklı sıcaklık ve deformasyon hızları altındaki davranışları da önem arz etmektedir. Özellikle imalat sanayinde çok farklı üretim ve şekillendirme yöntemleri mevcut olup her birinin kendine has özellikleri mevcuttur. Örneğin, sıcak derin çekme işleminde, sıcak yapılan çekme deneyleri ile malzemenin mekanik özellikleri belirlenebilmektedir. Aynı zamanda sonlu elemanlar analiz programlarının gelişmesiyle beraber bu durum daha önemli hale gelmiştir. Çünkü aynı koşullar altında modelleme yapılması sonuçların doğruluğu üzerinde oldukça etkilidir. Bu çalışma kapsamında çelik, titanyum, alüminyum ve nikel alaşımlarında sıcaklık ve deformasyon hızının çekme özelliklerine etkisi araştırılmıştır. Yapılan incelemelerde, bu malzemeler için sıcaklık ve deformasyon hızı değişiminin, gerilme ve süneklik üzerinde etkisinin çok fazla olduğu görülmüştür.

🔖

Cite This Article

KILIÇ, S., DEMİRDÖĞEN, M. F. (2022). Investigation of the Effect of Temperature and Strain Rate on Mechanical Properties. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, Cilt: 14 - Sayı: 2, 406–419. https://ajindex.com/articles/889099

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Alsagabi, S., Alqahtani, M. & Alajlan, A., (2018). The Elevated Temperature Deformation of G115 Steel and the Associated Deformation Mechanism. International Journal of Advances in Materials Science and Engineering (IJAMSE), 7 (1): 1-7. https://doi.org/10.14810/ijamse.2018.7101
  2. Altan, T. & Long, J., (2015). Forming Aluminum Alloys at Elevated Temperatures, Part 1, How Process Details Change for Warm and Hot Forming. Stamping Journal, 1 (1): 1-4.
  3. Attar, H. R., Li, N. & Foster, A., (2021). A New Design Guideline Development Strategy for Aluminium Alloy Corners Formed through Cold and Hot Stamping Processes. Materials Design, 207 (1): 109856. https://doi.org/10.1016/j.matdes.2021.109856
  4. Borek, W., Lis, M., Gołombek, K., Sakiewicz, P. & Piotrowski, K., (2019). Effect of Plastic Deformation Rate at Room Temperature on Structure and Mechanical Properties of High-Mn Austenitic Mn-Al-Si 25-3-3 Type Steel. Archives of Materials Science and Engineering, 96 (1): 22-31.
  5. Dai, Q., Deng, Y., Jiang, H., Tang, J. & Chen, J., (2019). Hot Tensile Deformation Behaviors and a Phenomenological Aa5083 Aluminum Alloy Fracture Damage Model. Materials Science and Engineering: A, 766 (1): 138325. https://doi.org/10.1016/j.msea.2019.138325
  6. Despax, L., Vidal, V., Delagnes, D., Dehmas, M., Matsumoto, H. & Velay, V., (2020). Influence of Strain Rate and Temperature on the Deformation Mechanisms of a Fine-Grained Ti-6al-4v Alloy. Materials Science and Engineering: A, 790 (1): 139718. https://doi.org/10.1016/j.msea.2020.139718
  7. Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. J. & Pogatscher, S., (2020). Mechanism of Low Temperature Deformation in Aluminium Alloys. Materials Science and Engineering: A, 795 (1): 139935. https://doi.org/10.1016/j.msea.2020.139935
  8. Haitao, X., Dengke, W. & Kaihong, S., (2020). Effect of Deformation Temperature on Mechanical Properties and Microstructure of Twip Steel for Expansion Tube. High Temperature Materials and Processes, 39 (1): 63-73. doi:10.1515/htmp-2020-0020
  9. Hao, F., Xiao, J., Feng, Y., Wang, Y., Ju, J., Du, Y., Wang, K., Xue, L. n., Nie, Z. & Tan, C., (2020). Tensile Deformation Behavior of a near-Α Titanium Alloy Ti-6al-2zr-1mo-1v under a Wide Temperature Range. Journal of Materials Research and Technology, 9 (3): 2818-2831. https://doi.org/10.1016/j.jmrt.2020.01.016
  10. Jiang, Y.-Q., Lin, Y. C., Jiang, X.-Y., He, D.-G., Zhang, X.-Y. & Kotkunde, N., (2020). Hot Tensile