Journals / Politeknik Dergisi / 2023 / Cilt: 26 - Sayı: 1

The Probe of Thermophysical Properties for BaTiO3/SrTiO3@MO Hybrid Nanolubricants

BaTiO3/SrTiO3@MO Hibrit Nanoyağlayıcılar için Termofiziksel Özelliklerin Araştırılması

Pages
437–443
Publication Date
2023-03-27
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

When comparing the thermophysical properties of mono and hybrid nanolubricants, it was found that the performance of the hybrid structures was better for cooling systems.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In recent years, nanofluids have been used in heating systems and nanolubricants as working fluids in refrigeration and air conditioning systems.
📊
Key Findings & Data:In this context, the thermophysical properties of the hybrid nanolubricant BaTiO3/SrTiO3@MO such as density, heat capacity, thermal conductivity and viscosity were calculated and compared.
💡
Conclusion & Impact:When comparing the thermophysical properties of mono and hybrid nanolubricants, it was found that the performance of the hybrid structures was better for cooling systems.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Termofiziksel Özellikler · Nanoyağlayıcı · BaTiO3

Abstract

In recent years, nanofluids have been used in heating systems and nanolubricants as working fluids in refrigeration and air conditioning systems. In the development of heat transfer properties, metal oxides and carbon-based compounds are mainly used in these suspensions. Often, nanolubricants are used, which are produced by combining several nanoparticles as a hybrid. In this context, the thermophysical properties of the hybrid nanolubricant BaTiO3/SrTiO3@MO such as density, heat capacity, thermal conductivity and viscosity were calculated and compared. In the study, BaTiO3 and SrTiO3 nanoparticles were used as solid particles in the hybrid structure. The thermophysical properties of the nanoparticles in the nanolubricant were also investigated. The mixing ratio of the nanoparticles in the hybrid structure was 1:1, and the particle mass fraction in 100 ml of mineral oil (MO) was also set at 1.0%. When comparing the thermophysical properties of mono and hybrid nanolubricants, it was found that the performance of the hybrid structures was better for cooling systems.

Özet

Son yıllarda ısıtma sistemlerinde nanoakışkanlar, soğutma ve iklimlendirme sistemlerinde de nanoyağlayıcılar çalışma sıvısı olarak kullanılmaktadır. Isı transfer özelliklerin gelişiminde, bu süspansiyonlarda metal oksitlere ve karbon bazlı bileşiklere yoğun şekilde yer verilmektedir. Birden fazla nanopartikülün hibrit olarak birleştirilmesiyle elde edilen nanoyağlayıcılar sıklıkla kullanılmaktadır. Bu bağlamda, BaTiO3/SrTiO3@MO hibrit nanoyağlayıcısının yoğunluk, ısı kapasitesi, termal iletkenlik ve viskozite gibi termofiziksel özellikleri hesaplanmıştır ve karşılaştırmalar yapılmıştır. Çalışmada hibrit yapı içerisinde katı parçacık olarak BaTiO3 ve SrTiO3 nanopartikülleri kullanılmıştır. Nanoyağlayıcı içerisindeki nanopartiküllerin termofiziksel özellikleri de incelenmiştir. Nanopartiküllerin, hibrit yapı içerisindeki karıştırma oranı 1:1 olarak katkılanmıştır. Ayrıca, 100 ml mineral yağ (MO) içerisindeki partükül kütle fraksiyonu %1.0 olarak belirlenmiştir. Tekli ve hibrit nanoyağlayıcıların termofiziksel özellikleri kıyaslandığında, soğutma sistemleri için hibrit yapıların performansının daha iyi olduğu görülmüştür.

🔖

Cite This Article

AKKAYA, M. (2023). The Probe of Thermophysical Properties for BaTiO3/SrTiO3@MO Hybrid Nanolubricants. Politeknik Dergisi, Cilt: 26 - Sayı: 1, 437–443. https://ajindex.com/articles/888309

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Sezer, N., Atieh, M. A., & Koç, M., “A comprehensive review on synthesis, stability, thermophysical properties, and characterization of nanofluids”, Powder Technology, 344, 404-431, (2019)
  2. Sözen, A., Gürü, M., Khanlari, A., & Çiftçi, E., “Experimental and numerical study on enhancement of heat transfer characteristics of a heat pipe utilizing aqueous clinoptilolite nanofluid”, Applied Thermal Engineering, 160, 114001, (2019)
  3. Apmann, K., Fulmer, R., Scherer, B., Good, S., Wohld, J., & Vafaei, S., “Nanofluid Heat Transfer: Enhancement of the Heat Transfer Coefficient Inside Microchannels”, Nanomaterials, 12(4): 615, (2022)
  4. Yılmaz Aydın, D., Çiftçi, E., Gürü, M., & Sözen, A., “The impacts of nanoparticle concentration and surfactant type on thermal performance of a thermosyphon heat pipe working with bauxite nanofluid”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 43(12): 1524-1548, (2021)
  5. Çiftçi, E., “Investigation of the thermophysical properties of AlN+ZnO/deionized water hybrid nanofluid”, International Journal of Energy Studies, 5(2): 57-69, (2020)
  6. Aljuwayhel, N. F., Ali, N., Ebrahim, S. A., & Bahman, A. M., “Experimental investigation of thermophysical properties, tribological properties and dispersion stability of nanodiamond-based nanolubricant for air conditioning systems”, International Journal of Refrigeration, 145, 325-337, (2023)
  7. Kamarulzaman, M. K., Hisham, S., Kadirgama, K., Ramasamy, D., Samykano, M., Saidur, R., & Yusaf, T., “Improving the thermophysical properties of hybrid nanocellulose-copper (II) oxide (CNC-CuO) as a lubricant additives: A novel nanolubricant for tribology application”, Fuel, 332, 126229, (2023)
  8. Bakhtiyar, N. K., Javadpour, R., Heris, S. Z., & Mohammadpourfard, M., “Improving the thermal characteristics of a cooling tower by replacing the operating fluid with functionalized and non-functionalized aqueous MWCNT nanofluids”, Case Studies in Thermal Engineering, 39, 102422, (2022)
  9. Aydın, D. Y., Aydin, E., & Gürü, M., “The effects of particle mass fraction and static magnetic field on the thermal performance of NiFe2O4 nanofluid in a heat pipe”, International Journal of Thermal Sciences, 183, 107875, (2023)
  10. Tuncer, A. D., Khanlari, A., Sözen, A., Gürbüz, E. Y., & Variyenli, H. İ., “Upgrading the performance of shell and helically coiled heat exchangers with new flow path by using TiO2/water and CuO–TiO2/water nanofluids”, International Journal of T