Journals / Konya Mühendislik Bilimleri Dergisi / 2023 / Cilt: 11 - Sayı: 1

EXPERIMENTAL INVESTIGATION OF ABSORPTION AND THERMAL ANALYSIS OF DIFFERENT TYPES OF NANOPARTICLES WITH MOTOR OIL BASED NANOFLUIDS

Motor Yağı Bazlı Nanoakışkanlar ile Farklı Tipteki Nanoparçacıkların Absorpsiyon ve Termal Analizinin Deneysel Olarak İncelenmesi

Pages
87–102
Publication Date
2023-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The measured Absorbance of the nanofluid is comparable to literature and has direct proportion relation with the volume fraction of nanoparticles.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nanofluids are fluid suspensions of nanoparticles that exhibit notable properties enhancement even at low nanoparticle concentrations.
📊
Key Findings & Data:The nanofluidic engine oil was prepared by dispersing multi-walled carbon nanotube (MWCNTs) and copper oxide (CuO) at different particle concentrations (0.03-0.12) %.
💡
Conclusion & Impact:The measured Absorbance of the nanofluid is comparable to literature and has direct proportion relation with the volume fraction of nanoparticles.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:nanoakışkan · termal iletkenlik · viskozite

Abstract

Nanofluids are fluid suspensions of nanoparticles that exhibit notable properties enhancement even at low nanoparticle concentrations. This work compares the measured and calculated thermophysical parameters of nanofluidic motor oil. Thermophysical parameters of motor oils include thermal conductivity, viscosity, and Absorbance. The nanofluidic engine oil was prepared by dispersing multi-walled carbon nanotube (MWCNTs) and copper oxide (CuO) at different particle concentrations (0.03-0.12) %. The oil characteristics were measured at wide range of temperature. The viscosity data were found to be comparable to the numbers reported in literature. We found that the thermal conductivity increased up to five times with minor variance in some cases. The variation in thermal conductivity can be related to several reasons such as oil specifications and nanofluid preparation conditions. The measured Absorbance of the nanofluid is comparable to literature and has direct proportion relation with the volume fraction of nanoparticles.

Özet

Üstün termal ve fiziksel nitelikleri nedeniyle nano akışkanlar, ısı transferi uygulamalarında giderek daha fazla kullanılmaktadır. Bu araştırma, çeşitli termofiziksel parametreler için teorik hesaplamaları, bu kesin miktarların deneysel ölçümleriyle karşılaştırır. Dağınık MWCNT'ler ve CuO içeren bir nano akışkan olarak motor yağının termofiziksel özellikleri, geniş bir sıcaklık aralığı ve partikül konsantrasyon oranı boyunca incelenmiştir. Bu tür özelliklerin örnekleri ısı iletkenliği, viskozite ve emiciliktir. Viskozite verilerinin literatürle uyumlu olduğu görüldü. Bununla birlikte, diğer birçok araştırmacının onayladığı, termal iletkenlik sonuçlarında bariz bir tutarsızlık vardır. UV-Vis absorbans sonuçlarının daha önce mevcut olan literatürle karşılaştırılması tatmin ediciydi. Ancak, sıvının bileşenlerinin özellikleri ve hazırlama işlemlerinin koşulları da dahil olmak üzere çeşitli nedenlerle ilgili bazı farklılıklar vardır.

🔖

Cite This Article

AL-ENEZY, J., YAPICI, R., HAMEED, A. (2023). EXPERIMENTAL INVESTIGATION OF ABSORPTION AND THERMAL ANALYSIS OF DIFFERENT TYPES OF NANOPARTICLES WITH MOTOR OIL BASED NANOFLUIDS. Konya Mühendislik Bilimleri Dergisi, Cilt: 11 - Sayı: 1, 87–102. https://ajindex.com/articles/884112

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. S. Choi and J. A. Eastman, “Enhancing thermal conductivity of fluids with nanoparticles, Developments and applications of non-Newtonian flows”, Conference: Enhancing thermal conductivity of fluids with nanoparticles, 1995, pp. 99- 105
  2. M. Hemmat Esfe, M. Afrand, W.-M. Yan, H. Yarmand, D. Toghraie and M. Dahari, “Effects of temperature and concentration on rheological behavior of MWCNTs/SiO2 (20–80)-SAE40 hybrid nano-lubricant”, International Communications in Heat and Mass Transfer, Volume 76, Pages 133-138, August 2016
  3. Asadi, “A guideline towards easing the decision-making process in selecting an effective nanofluid as a heat transfer fluid”, Energy Conversion and Management, Volume 175, Pages 1-101, November 2018
  4. M Afrand, K Nazari Najafabadi and M Akbari,” Effects of temperature and solid volume fraction on viscosity of SiO2-MWCNTs/SAE40 hybrid nanofluid as a coolant and lubricant in heat engines, Applied Thermal Engineering, Volume 102, Pages 45-54, 5 June 2016
  5. M. Fakoor, Pakdaman, M.A. Akhavan-Behabadi, P. Razi, “An experimental investigation on thermo-physical properties and overall performance of MWCNT/heat transfer oil nanofluid flow inside vertical helically coiled tubes”, Experimental Thermal and Fluid Science, Volume 40, Pages 103-111, July 2012
  6. M. H Esfe, S. Saedodin, M. Rejvani, J. Shahram, “Experimental investigation, model development and sensitivity analysis of rheological behavior of ZnO/10W40 nano-lubricants for automotive applications”, Physical E: Low-dimensional Systems and Nanostructures, Volume 90, Pages 194-203, June 2017
  7. K Motahari, M A Moghaddam and M Moradian, “Experimental investigation and development of new correlation for influences of temperature and concentration on dynamic viscosity of MWCNT-SiO2 (20-80)/20W50 hybrid nano-lubricant “,Chinese Journal of Chemical Engineering, Volume 26, Issue 1,Pages 152-158, January 2018
  8. Y Xuan, H Duanb and Q Lib,” Enhancement of solar energy absorption using a plasmonic nanofluid based on TiO2/Ag composite nanoparticles”, RSC Advances, Issue 31, 2014
  9. M. Karami, M.A. Akhavan Bahabadi, S. Delfani and A. Ghozatloo,” A new application of carbon nanotubes nanofluid as working fluid of low-temperature direct absorption solar collector”, Solar Energy Materials and Solar Cells, Volume 121, Pages 114-118, February 2014
  10. N Hordy, D Rabilloud, J Meunier and S Coulombe, “High temperature and long-term stability of carbon nanotube nanofluids for direc