Journals / Politeknik Dergisi / 2022 / Cilt: 25 - Sayı: 4

The Effect of Graphite Particles as Lubricant Additive on the Friction and Wear Behaviour of AISI H11 Steel

Grafit Partiküllerinin Yağ Katkısı Olarak AISI H11 Çeliğinin Sürtünme ve Aşınma Davranışı Üzerine Etkisi

Pages
1495–1503
Publication Date
2022-12-16
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The study leads to the conclusion that addition of graphite particles improved the wear and friction properties of the lubricant. 5% graphite dispersed oil additive exhibited the best tribological performance in the tests.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In recent years, the tribological investigations have been focused on dispersing additives into the oil lubricants to improve their friction and wear properties.
📊
Key Findings & Data:The wear and friction behaviour of the samples were investigated under dry condition, base oil and 5%, 10%, 15%, 20% and 25% wt. graphite as oil additive.
💡
Conclusion & Impact:The study leads to the conclusion that addition of graphite particles improved the wear and friction properties of the lubricant. 5% graphite dispersed oil additive exhibited the best tribological performance in the tests.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:aşınma · sürtünme · grafit

Abstract

In recent years, the tribological investigations have been focused on dispersing additives into the oil lubricants to improve their friction and wear properties. Microhardness measurements of the samples made from heat treated hot work tool steel were carried out in this study. The wear and friction behaviour of the samples were investigated under dry condition, base oil and 5%, 10%, 15%, 20% and 25% wt. graphite as oil additive. Wear tests were carried out by means of a ball-on-disc test configuration. Average friction coefficients and wear scar related wear rates were calculated. The morphology of the worn surfaces were analyzed by optical microscopy and scanning electron microscopy (SEM). The study leads to the conclusion that addition of graphite particles improved the wear and friction properties of the lubricant. 5% graphite dispersed oil additive exhibited the best tribological performance in the tests.

Özet

Son yıllarda tribolojik araştırmalar yağlara katkılar ekleyerek onların sürtünme ve aşınma özelliklerini iyileştirmek üzerine yoğunlaşmıştır. Bu çalışmada, ısıl işlem uygulanmış sıcak iş takım çeliği malzemeden numunelerin kuru koşul, katkısız yağ ve ağırlıkça %5, %10, %15, %20 ve %25 grafit katkılı yağlarda aşınma ve sürtünme özellikleri incelenmiştir. Aşınma deneyleri ball-on-disc deney düzeneği ile gerçekleştirilmiştir. Ortalama sürtünme katsayıları ve aşınma izlerine bağlı olarak aşınma oranları hesaplanmıştır. Mikrosertlik ölçümleri yapılan numunelerin optik mikroskop ve taramalı elektron mikroskobu (SEM) ile aşınan yüzeylerinin mikroyapı analizleri yapılmıştır. Çalışmada sonuç olarak, grafit partiküllerinin yağın aşınma ve sürtünme özelliklerini iyileştirdiği görülmüştür. Deneylerde en iyi tribolojik performansı %5 grafit katkılı yağ sergilemiştir.

🔖

Cite This Article

ÜNLÜOĞLU, O., ÇELİK, O. N. (2022). The Effect of Graphite Particles as Lubricant Additive on the Friction and Wear Behaviour of AISI H11 Steel. Politeknik Dergisi, Cilt: 25 - Sayı: 4, 1495–1503. https://ajindex.com/articles/880105

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Higgs C. F., Wornyoh E.Y.A., “An in situ mechanism for self-replenishing power transfer films: experiments and modeling”, Wear, 264: 131-138, (2008)
  2. Yu Y., Gu J., Kang F., Kong X., Mo W., “Surface restoration induced by lubricant additive of natural minerals”, Applied Surface Science, 253(18): 7549-7553, (2007)
  3. Zhang B., Xu Y., Gao F., Shi P., Xu B., Wu Y., “Sliding friction and wear behaviors of surface-coated natural serpentine mineral powders as lubricant additive”, Applied Surface Science, 257(7): 2540-2549, (2011)
  4. Yu H. L., Xu Y., Shi P. J., Wang H. M., Zhang W., Xu B. S., “Effect of thermal activation on the tribological behaviours of serpentine ultrafine powders as an additive in liquid paraffin”, Tribology International, 44(12): 1736-1741, (2011)
  5. Yu H. L., Xu Y., Shi P. J., Wang H. M., Zhao Y., Xu B. S., Bai, Z. M., “Tribological behaviors of surface-coated serpentine ultrafine powders as lubricant additive”, Tribology International, 43(3): 667-675, (2010)
  6. Pawlak Z., Kaldonski T., Pai R., Bayraktar E., Oloyede A., “A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles—An additive in porous sliding bearings for a car clutch”, Wear, 267(5-8): 1198-1202, (2009)
  7. Shi H., Fu X., Zhou X., Wang D., Hu Z., “A low-temperature extraction-solvothermal route to the fabrication of micro-sized MoS2 spheres modified by Cyanex 301”, Journal of Solid State Chemistry, 179(6): 1690-1697, (2006)
  8. Feng W., “Research on microstructure of the auto-restoration layer of worn surface of metals”, Materials Science and Engineering A, 399(1-2): 271-275, (2005)
  9. Clauss F. J., “Solid lubricants and self-lubricating solids”, Chapter 5, Handbook of Tribology, McGraw Hill Inc., USA, (1991)
  10. Hutchings I., Shipway P., “Tribology: Friction and wear of engineering materials”, 2nd edition, Butterworth- Heinemann Publishing, (2017)
  11. Jackson M. J., Morrell J., “Tribology in manufacturing”, Tribology for engineers, Woodhead Publishing, Cambridge, UK, (2011)
  12. Sliney H. E., “Solid lubricant materials for high temperatures - a review”, Tribology International, October: 303-315, (1982)
  13. Sharma V., Joshi R., Pant H., Sharma V. K., “Improvement in frictional behaviour of SAE 15W-40 lubricant with the addition of graphite particles”, Materials Today: Proceedings, 25: 719-723, (2020)
  14. Lee C. G., Hwang Y. J., Choi Y. M., Lee J. K., Choi C., Oh J. M., “A study on the tribolo