Journals / Gemi ve Deniz Teknolojisi / 2023 / Sayı: 222

Investigating Mechanical Behavior of a Lattice Structure Inspired by Venus’ Flower Basket

Venüs’ün Çiçek Sepeti Süngerinden Esinlenerek Tasarlanmış Bir Kafes Sistemin Yapısal Davranışının İncelenmesi

Dinçer Öykünç(İSTANBUL TEKNİK ÜNİVERSİTESİ)0000-0001-8415-3378
M. Erden Yıldızdag(ISTANBUL TECHNICAL UNIVERSITY, FACULTY OF NAVAL ARCHITECTURE)0000-0003-3041-133X
Pages
64–75
Publication Date
2023-01-13
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is shown that the critical buckling load can be improved while total volume of the structure is reduced with the adapted optimization algorithm.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, mechanical behavior of a lattice structure inspired by Venus’ Flower Basket, a deep sea sponge, is investigated.
📊
Key Findings & Data:Then, a finite element model is generated by using beam elements.
💡
Conclusion & Impact:It is shown that the critical buckling load can be improved while total volume of the structure is reduced with the adapted optimization algorithm.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:biyomimetik · sonlu elemanlar metodu · Venüs'ün Çiçek Sepeti

Abstract

In this study, mechanical behavior of a lattice structure inspired by Venus’ Flower Basket, a deep sea sponge, is investigated. To this end, the lattice structure is first designed considering the structural elements constituting the skeleton of the sponge. Then, a finite element model is generated by using beam elements. Critical buckling load of the preliminary design is determined by conducting linear buckling analysis (eigenvalue buckling analysis) assuming the structure is under pressure both in longitudinal and circumferential directions. Next, to improve the critical buckling load of the preliminary design, a surface response optimization-based algorithm is utilized to obtain optimum geometric parameters. It is shown that the critical buckling load can be improved while total volume of the structure is reduced with the adapted optimization algorithm.

Özet

Bu çalışmada Venüs’ün Çiçek Sepeti adlı deniz süngerinden esinlenilerek tasarlanmış bir kafesyapının mekanik davranışı incelenmiştir. İlk olarak canlının sahip olduğu silindirik iskelet ve iskeleti oluşturan yapısal elemanlar göz önüne alınarak tasarlanan kafes sistemin sonlu elemanlar modeli kiriş elemanlar yardımıyla oluşturulmuştur. Tasarlanan yapının mekanik davranışı canlının yaşadığı ortam da göz önüne alınarak burkulma açısından incelenmiştir. Lineer burkulma analizleri yapının hem boyuna hem de çevresel yönde basınca maruz kaldığı kabul edilerek gerçekleştirilmiştir. Belirlenen ön dizayn değerleriyle hesaplanan kritik burkulma yükünü iyileştirmek için Tepki Yüzey Metodolojisi tabanlı bir algoritma ile geometrik parametreler optimize edilmiştir. Yapısal optimizasyon çalışmasıyla hacmin azaltılırken kritik burkulma yükünün arttırabileceği gösterilmiştir.

🔖

Cite This Article

Öykünç, D., Yıldızdag, M. E. (2023). Investigating Mechanical Behavior of a Lattice Structure Inspired by Venus’ Flower Basket. Gemi ve Deniz Teknolojisi, Sayı: 222, 64–75. https://doi.org/10.54926/gdt.1156139

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Monn, M. A., Weaver, J. C., Zhang, T., Aizenberg, J., and Kesari, H. (2015). New functional insights into the internal architecture of the laminated anchor spicules of Euplectella aspergillum. Proceedings of the National Academy of Sciences, 112(16), 4976-4981.
  2. Morankar, S., Singaravelu, A. S. S., Niverty, S., Mistry, Y., Penick, C. A., Bhate, D., and Chawla, N. (2022). Tensile and fracture behavior of silica fibers from the Venus flower basket (Euplectella aspergillum). International Journal of Solids and Structures, 111622.
  3. Reisen, K., Teschemacher, U., Niehues, M., and Reinhart, G. (2016). Biomimetics in production organization–a literature study and framework. Journal of Bionic Engineering, 13(2), 200-212.
  4. Sevencan, H. (2020). Tekstil ve giysi tasariminda biyomimetik uygulamalari. Uluslararası Disiplinlerarası ve Kültürlerarası Sanat, 5(10), 101-118.
  5. Taşkan, M., Mutlu Avinç, G., and Arslan Selçuk, S. (2022). Canlıların su dengesi sağlama stratejileri ve biyo-bilgili yapı kabuğu tasarımı. Online Journal of Art and Design, 10(1).
  6. Tavangarian, F., Sadeghzade, S., and Davami, K. (2021). A novel biomimetic design inspired by nested cylindrical structures of spicules. Journal of Alloys and Compounds, 864, 158197.
  7. Weaver, J. C., Aizenberg, J., Fantner, G. E., Kisailus, D., Woesz, A., Allen, P., Fields, K., Porter, M. J., Zok, F. W., Hansma, P. K., Fratzl, P. & Morse, D. E. (2007). Hierarchical assembly of the siliceous skeletal lattice of the hexactinellid sponge Euplectella aspergillum. Journal of structural biology, 158(1), 93-106.
  8. Yildizdag, M. E., Tran, C. A., Barchiesi, E., Spagnuolo, M., and Hild, F. (2019). A multi-disciplinary approach for mechanical metamaterial synthesis: A hierarchical modular multiscale cellular structure paradigm. In State of the art and future trends in material modeling (pp. 485-505). Springer, Cham.