Journals / Türkiye Ormancılık Dergisi / 2022 / Cilt: 23 - Sayı: 4

Comparison of some debarking tools in terms of productivity and debarking quality

Bazı kabuk soyma araçlarının verim ve kabuk soyma kalitesi açısından karşılaştırılması

Pages
278–289
Publication Date
2022-12-29
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been revealed that Motosoyar has implementation potential as well as theoretical, technical, economic and ergonomic potential in debarking works.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this research, the use of the motosoyar, which was previously developed by mounting a peeling device on a brush cutter, in the field and the determination of the resulting efficiency; in addition, it was aimed to determine the implementation potential of the motosoyar by comparing the work productivity of the motosoyar with the chainsaw-mounted debarking equipment and the axe.
📊
Key Findings & Data:In debarking operations of logs with an average diameter of 25 cm, medium diameter and 3 m length, the chainsaw was more efficient in all time periods (3.65 m3/h), motosoyar (3.06 m3/h) was found to be efficient compared to the axe (1.25 m3/h), but inefficient compared to the chainsaw.
💡
Conclusion & Impact:It has been revealed that Motosoyar has implementation potential as well as theoretical, technical, economic and ergonomic potential in debarking works.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kabuk soyma · Kabuk soyma aparatı · Motorlu testereye montajlı kabuk soyma

Abstract

In this research, the use of the motosoyar, which was previously developed by mounting a peeling device on a brush cutter, in the field and the determination of the resulting efficiency; in addition, it was aimed to determine the implementation potential of the motosoyar by comparing the work productivity of the motosoyar with the chainsaw-mounted debarking equipment and the axe. In addition, it was aimed to compare the debarking quality of these three tools by accepting the amount of bark remaining on the log surface as an indicator. A certified employee; in the same field conditions, in the same stand, in the same tree species (Pinus brutia Ten.), cut and sorted on the same dates, the bark of logs of similar height and different diameters was stripped with these three tools. Work efficiency was determined through time studies; debarking quality was calculated over the amount of bark remaining on the log. In debarking operations of logs with an average diameter of 25 cm, medium diameter and 3 m length, the chainsaw was more efficient in all time periods (3.65 m3/h), motosoyar (3.06 m3/h) was found to be efficient compared to the axe (1.25 m3/h), but inefficient compared to the chainsaw. In terms of debarking quality, it has been determined that the axe peels more cleanly (remaining shell amount; 1.65%), the chainsaw follows it with a rate of 2.73%, and the motosoyar peels at a level of 3.42%. With the improvement of the system structure (arrangement of belt and shaft arm) of motosoyar, it has shown a performance that can be as efficient and useful as a chainsaw. It has been revealed that Motosoyar has implementation potential as well as theoretical, technical, economic and ergonomic potential in debarking works.

Özet

Türkiye ormancılığında, ibreli ağaç türlerinin hasadında, kabuk soyma işleri çoğunlukla meşcere içinde (kütük dibinde) gerçekleştirilmektedir. Bu çalışmada, motorlu testerelere monte edilmesi için tasarlanan kabuk soyma aparatının, modifiye edilip motorlu çalı tırpanına montajlanmasıyla elde edilen ve motosoyar adı verilen aracın kabuk soyma operasyonlarındaki kullanılabilirliği konu edilmiştir. Çalışmanın amacı; motosoyarın kabuk soymadaki uygulama potansiyelini ortaya koyabilmek için motosoyarın iş verimi ve kabuk soyma kalitesini, balta ve motorlu testere ile karşılaştırıp değerlendirmektir. Antalya Orman Bölge Müdürlüğü Akseki Orman İşletme Müdürlüğü sınırları içindeki devlet ormanlarında aynı ağaç türünde (kızılçam; Pinus brutia Ten.), aynı meşcere koşullarında, tecrübeli ve sertifikalı bir operatörle, aynı zaman periyodunda hasat edilmiş benzer boy ve farklı çaplardaki tomrukların kabukları, üç farklı araç-gereçle soyulmuştur. Araç-gereç farklılıklarından kaynaklanan kabuk soyma performansı, iş-zaman etütlerinden elde edilen iş verimiyle; kabuk soyma kalitesi ise tomrukta kalan kabuklu alan miktarından elde edilen oranla belirlenmiş ve birbirleriyle karşılaştırılmıştır. Sonuçlar; ortalama 25 cm orta çap ve 3 m boya sahip tomrukların kabuklarının soyulmasında, tüm zaman dilimleri ölçeğinde motorlu testerenin en yüksek verime sahip olduğunu (3.65 m3/sa); motosoyarın (3.06 m3/sa) baltaya (1.25 m3/sa) göre daha verimli olmasına karşın motorlu testereye göre veriminin düşük olduğunu göstermiştir. Soyma kalitesi yönünden baltanın daha temiz (kalan kabuk miktarı; %1.65) soyma yaptığı, motorlu testerenin % 2.73’ lük oranla onu izlediği ve motosoyarın ise %3.42’lik bir düzeyde kabuk bıraktığı tespit edilmiştir. Motosoyar; sistem yapısının iyileştirilmesiyle (kayış ve şaft kolunun düzenlenmesi) motorlu testere kadar verimli ve kullanışlı olabilecek bir performans göstermiştir. Motosoyarın, kabuk soyma işlerindeki (daha önceki çalışmalarda belirlenen) teorik, teknik, ekonomik ve ergonomik potansiyeli yanında, uygulama potansiyeline de sahip olduğu ortaya konulmuştur.

🔖

Cite This Article

EKER, M., ÖZTÜRK, E. (2022). Comparison of some debarking tools in terms of productivity and debarking quality. Türkiye Ormancılık Dergisi, Cilt: 23 - Sayı: 4, 278–289. https://ajindex.com/articles/871847

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Alkan, H., Eker, M., 2005. Orman kaynaklarından faydalanmanın sürdürülebilirliğine dar ölçekli bir bakış. Türk ormancılığında uluslararası süreçte acil eyleme dönüştürülmesi gereken konular, mevzuat ve yapılanmaya yansımaları. Orman Mühendisleri Odası Sempozyumu, 22-24
  2. Aralık, Antalya, s. 423-437.
  3. Alkan, H., Korkmaz, M., Eker, M., 2010. Sürdürülebilir orman yönetiminde yaşanan gelişmeler, karşılaşılan sorunlar ve çözüm önerileri: Isparta Orman Bölge Müdürlüğü örneği. III. Ulusal Karadeniz Ormancılık Kongresi, 20-22
  4. Mayıs, Artvin, s. 56-67.
  5. Baroth, R., 2005. Literature Review of the Latest Development of Wood Debarking. Control Engineering Laboratory Report A, No 27, University of Oulu, Finland. BASEH, 2022. Ağaç Kabuk Soyma Aparatları. Bahtiyar Motor Sanayi Ltd. Şti., İzmir. http://www.baseh.com/v/category/106-kabuk-soyma-aparatlari.html Erişim: 23.10.2022
  6. Björheden, R., 1991. Basic time concepts for international comparisons of time study reports. Journal of Forest Engineering, 2(2): 33–39.
  7. Carus, S., 2002. Bazı hacim formüllerinin seksiyon, gövde ve bağıl uzunluklara göre kıyaslanması. Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi, 1: 101-114.
  8. Chahal, A., Ciolkosz, D., Puri, V., Jacobson, M., Liu, J., 2021. Mechanical characteristics of wood-bark interface of shrub willow. Industrial Crops and Products, 162: 1-7.
  9. Çağlar, S., 2021. Work efficiency and physical workload during the manual debarking of Scotch pine trees. International Journal of Forest Engineering, 32(3): 246-255.
  10. Çoban, C., 1975. Göknar ve Çam Tomrukların Uzun Boylu ve Kabuklu Olarak Hasadıyla Uygulanmakta Olan Yöntemin Ekonomik Yönden İrdelenmesi. Ormancılık Araştırma Enstitüsü, Teknik Bülten Serisi No:73, Gürsoy Basımevi, Ankara.
  11. Çoban, H.O., Eker, M., 2014. GIS based strategy on timber transportation system in mountainous forest regions. 5th Forest Engineering Conference (FEC) & 47th International Symposium on Forestry Mechanization (FORMEC), 23-26 September 2014, Gerardmer (France), pp.1-2.
  12. Ding, F., İbrahim, F., Gagne, P., 2012. MPC based ring deberking process optimization. 25th IEEE Canadian Conference on Electrical and Computer Engineering, 29 April 2012 - 02 May 2012,
  13. Montreal, QC, Canada, pp. 1-4.
  14. Dingil, S., 1991. Kızılçam (Pinus brutia Ten.) ve Sedir (Cedrus libani A. Richard) Ağaç Türlerinde Yapacak ve Yakacak Odun Elde Edilmesinde İş ve Zaman Analizleri. Ormancılık Araştırma Enstitüsü Yayınları, Teknik Bülten Serisi No: 213, Ankara.
  15. Doğan, A., 2015. İş Etüdü Yöntem Bil