Journals / Bor Dergisi / 2022 / Cilt: 7 - Sayı: 4

Co-synthesis of zirconium boride/silicide/oxide composite powders by magnesiothermic reduction

Zirkonyum borür/silisit/oksit kompozit tozlarının magnezyotermik indirgeme ile sentezi

Pages
552–559
Publication Date
2022-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results, the thermochemical predictions and resultant powder phases showed good coherency.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study uses a magnesiothermic reduction method to investigate the co-synthesis of zirconium boride, silicides, and oxide powder composites using ZrO2, B2O3, Si, and Mg initial powders.
📊
Key Findings & Data:High-energy milling has a significant effect on the formation of the zirconium boride phase after annealing.
💡
Conclusion & Impact:According to the results, the thermochemical predictions and resultant powder phases showed good coherency.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:ZrB2 · ZiSi2 · Magnezyotermik reaksiyon

Abstract

This study uses a magnesiothermic reduction method to investigate the co-synthesis of zirconium boride, silicides, and oxide powder composites using ZrO2, B2O3, Si, and Mg initial powders. The synthesis of high-temperature ceramic powders is examined through milling durations, reduction temperatures, and excess magnesium addition. Thermochemical analysis of probable reaction products was conducted by the Factsage software. According to the results, the thermochemical predictions and resultant powder phases showed good coherency. High-energy milling has a significant effect on the formation of the zirconium boride phase after annealing. However, extended milling time and higher annealing temperature have no significant effects on the composition of the constituted composite powders according to the X-ray diffraction results. An annealing temperature of 600 ºC was enough to obtain ZrB2-based ceramic composite powders. In the final powder phases, the excess magnesium addition to the stoichiometric displays an important feature. After the milling, annealing, and leaching procedure, the stoichiometric powder composition comprises ZrB2, ZrSi, ZrSi2, ZrO2, and MgSiO2, and excess Mg added powders have the ZrB2, ZrSi, ZrSi2, ZrO2 phases in their structure. Scanning electron microscopy analysis was utilized to observe the morphologies of the powders throughout each step of the synthesis procedure and revealed the finely structured morphology of synthesized powders.

Özet

Bu çalışmada, ZrO2, B2O3, Si ve Mg başlangıç tozları kullanılarak zirkonyum borür, silisit ve oksit kompozit tozlarının magnezyotermik indirgeme yöntemi kullanılarak birlikte sentezlenmesi araştırılmıştır. Seramik tozlarının sentezlenmesinde incelenen üretim parametreleri farklı öğütme süreleri, tavlama sıcaklıkları ve fazla magnezyum ilavesidir. Kullanılan başlangıç toz sisteminin termokimyasal analizi, Factsage yazılımı kullanılarak yapılmıştır. Sonuçlara göre, termokimyasal tahminler ve elde edilen toz kompozisyonları tutarlılık göstermiştir. Yüksek enerjili öğütmenin, tavlama sonrası zirkonyum borür fazının oluşuması üzerinde önemli bir etkisi olduğu görülmüştür. Bunun yanında, x-ışını kırınımı sonuçlarına göre, uzatılan öğütme süresinin ve farklı tavlama sıcaklıklarının, oluşturulan kompozit tozların bileşimi üzerinde çok belirgin bir etkiye sahip olmadığı görülmüştür. ZrB2 esaslı seramik kompozit tozlarının elde edilmesi için 600 ºC tavlama sıcaklığının yeterli olduğu görülmüştür. Stokiyometrik başlangıç toz kompozisyonuna, yapılan fazla magnezyum ilavesinin sentezlenen toz kompozisyonlarındaki fazları değiştirdiği saptanmıştır. Öğütme, tavlama ve liç işlemlerinden sonra stokiyometrik toz bileşimi ZrB2, ZrSi, ZrSi2, ZrO2 ve Mg2SiO4 içerirken, fazla Mg katkılı tozların yapısında ZrB2, ZrSi, ZrSi2, ZrO2 fazları bulunmaktadır. Sentez prosedürünün her aşaması boyunca tozların morfolojilerini gözlemlemek için taramalı elektron mikroskobu analizi kullanılmıştır ve sentezlenen tozların ince yapılı bir morfolojiye sahip olduğu görülmüştür.

🔖

Cite This Article

DÖNDAŞ, D. O. (2022). Co-synthesis of zirconium boride/silicide/oxide composite powders by magnesiothermic reduction. Bor Dergisi, Cilt: 7 - Sayı: 4, 552–559. https://ajindex.com/articles/866005

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Adibpur, F., Zaferi, M., & Tayebifard, S. A. (2013). Feasibility Study of Metallic Reductant Element Replacement by Mechanical Activation Process in ZrB2-ZrC Composite Synthesis from Raw Oxide Materials by SHS. Life Science Journal, 10(8), 336–341.
  2. Ağaoğulları, D., Balci, Ö., Mertdinç, S., Tekoğlu, E., & Öveçoğlu, M. L. (2018). Synthesis of VB2-V3B4-V2B3/VC hybrid powders via powder metallurgy processes. Journal of Boron, 3(3), 180–187. https://doi.org/10.30728/boron.441148
  3. Ağaoğulları, D., Balcı, Ö., Akçamlı, N., Suryanarayana, C., Duman, İ., & Öveçoğlu, M. L. (2019). Mechanochemical synthesis and consolidation of nanostructured cerium hexaboride. Processing and Application of Ceramics, 13(1), 32–43. https://doi.org/10.2298/PAC1901032A
  4. Aguirre, T. G., Lamm, B. W., Cramer, C. L., & Mitchell, D. J. (2022). Zirconium-diboride silicon-carbide composites: A review. Ceramics International, 48(6), 7344–7361. https://doi.org/10.1016/j.ceramint.2021.11.314
  5. Astapov, A. N., Pogozhev, Y. S., Prokofiev, M. V., Lifanov, I. P., Potanin, A. Y., Levashov, E. A., & Vershinnikov, V. I. (2019). Kinetics and mechanism of high-temperature oxidation of the heterophase ZrSi2-MoSi2-ZrB2 ceramics. Ceramics International, 45(5), 6392–6404. https://doi.org/10.1016/j.ceramint.2018.12.126
  6. Balcı, Ö., Ağaoğulları, D., Duman, İ., & Öveçoğlu, M. L. (2012). Carbothermal production of ZrB2–ZrO2 ceramic powders from ZrO2–B2O3/B system by high-energy ball milling and annealing assisted process. Ceramics International, 38(3), 2201–2207. https://doi.org/10.1016/j.ceramint.2011.10.067
  7. Balcı, Ö., Ağaoğulları, D., Ovalı, D., Lütfi Öveçoğlu, M., Duman, İ. (2015). In situ synthesis of NbB2–NbC composite powders by milling-assisted carbothermal reduction of oxide raw materials. Advanced Powder Technology, 26(4), 1200–1209. https://doi.org/10.1016/j.apt.2015.06.001
  8. Balcı, Ö., Ağaoğulları, D., Öveçoğlu, M. L., & Duman, İ. (2016). Synthesis of niobium borides by powder metallurgy methods using Nb2O5, B2O3 and Mg blends. Transactions of Nonferrous Metals Society of China, 26(3), 747–758. https://doi.org/10.1016/S1003-6326(16)64165-1
  9. Balcı, Ö., Akçamlı, N., Ağaoğulları, D., Öveçoğlu, M. L., & Duman, İ. (2017). Otoklavda sentezlenen ZrB2 -ZrO2 tozlarının farklı tekniklerle sinterlenmesi ve yığın yapıların mikroyapısal ve bazı mekanik özelliklerinin incelenmesi. Bor Dergisi, 2(1), 1–10.
  10. Baris, M., Simsek, T., Simsek, T., Ozcan, S., & Kalkan, B. (2018). High purity synthesis of ZrB2 by a combined ball millin