Journals / Bor Dergisi / 2022 / Cilt: 7 - Sayı: 4

Effect of boron oxide (B2O3) on thermal and mechanical decomposition behavior of PET

Bor oksit’in (B2O3) PET’in termal ve mekanik bozunma davranışı üzerine etkisi

Pages
535–542
Publication Date
2022-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

While no effect of B2O3 additive was observed on isophthalic acid (IPA) released as a result of the degradation of PET, a decrease in the amount of acetaldehyde (AA) and an increase in the amount of carboxylic acid (COOH) and diethylene glycol (DEG) occurred.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, different amounts of boron oxide (B2O3) (0.05-0.8% by mass) were incorporated to polyethylene terephthalate (PET) by extrusion method, and then PET/B2O3 granules and bottles were produced using the injection and stretch-blow-molding methods, respectively.
📊
Key Findings & Data:With the increase of B2O3 content, the viscosity of PET composite decreased and the lowest viscosity value was measured as 0.385 dL/g for %0.8 B2O3 concentration.
💡
Conclusion & Impact:While no effect of B2O3 additive was observed on isophthalic acid (IPA) released as a result of the degradation of PET, a decrease in the amount of acetaldehyde (AA) and an increase in the amount of carboxylic acid (COOH) and diethylene glycol (DEG) occurred.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:• Ambalaj · B2O3 · PET

Abstract

In this study, different amounts of boron oxide (B2O3) (0.05-0.8% by mass) were incorporated to polyethylene terephthalate (PET) by extrusion method, and then PET/B2O3 granules and bottles were produced using the injection and stretch-blow-molding methods, respectively. With the increase of B2O3 content, the viscosity of PET composite decreased and the lowest viscosity value was measured as 0.385 dL/g for %0.8 B2O3 concentration. The crystallization temperature (Tc) of PET composites increased by about 8.2ºC due to the increase in the amount of B2O3. While no effect of B2O3 additive was observed on isophthalic acid (IPA) released as a result of the degradation of PET, a decrease in the amount of acetaldehyde (AA) and an increase in the amount of carboxylic acid (COOH) and diethylene glycol (DEG) occurred.

Özet

Bu çalışmada, ekstrüzyon yöntemiyle bor oksit (B2O3) farklı miktarlarda (kütlece %0,05–0,8) polietilen tereftalat’a (PET) katkılanarak önce PET/B2O3 granülleri sonrasında ise sırasıyla enjeksiyon ve gerdirme-şişirme-kalıplama yöntemleriyle şişe üretimi gerçekleştirildi. B2O3 içeriğinin artmasıyla PET kompozitin viskozitesi azalmış ve en düşük viskozite değeri %0,8 B2O3 konsantrasyonu için 0,385 dL/g olarak ölçülmüştür. PET kompozitlerin kristalleşme sıcaklığı (Tc), B2O3 miktarının artışına bağlı olarak yaklaşık 8,2ºC yükselmiştir. PET’in bozunması sonucu açığa çıkan izoftalik asit (IPA) üzerinde B2O3 katkısının herhangi bir etkisi görülmezken asetaldehit (AA) miktarında azalma, karboksilik asit (COOH) ve dietilen glikol (DEG) miktarında ise artış meydana gelmiştir.

🔖

Cite This Article

DEMİREL, B., YARAŞ, A., AKKURT, F., SÜRDEM, S. (2022). Effect of boron oxide (B2O3) on thermal and mechanical decomposition behavior of PET. Bor Dergisi, Cilt: 7 - Sayı: 4, 535–542. https://ajindex.com/articles/866003

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Gerassimidou, S., Lanska, P., Hahladakis, J. N., Lovat, E., Vanzetto, S., Geueke, B., … Martin, O. V. (2022). Unpacking the complexity of the PET drink bottles value chain: A chemicals perspective. Journal of Hazardous Materials, 128410. Kawai, F. (2021). Emerging strategies in polyethylene terephthalate hydrolase research for biorecycling. ChemSusChem, 14(19), 4115–4122.
  2. Venkatachalam, S., Nayak, S. G., Labde, J. V, Gharal, P. R., Rao, K., & Kelkar, A. K. (2012). Degradation and recyclability of poly (ethylene terephthalate). In Polyester (pp. 75–98).
  3. InTech Rijeka, Croatia. Das, P., & Tiwari, P. (2019). Thermal degradation study of waste polyethylene terephthalate (PET) under inert and oxidative environments. Thermochimica Acta, 679, 178340. Mutsuga, M., Tojima, T., Kawamura, Y., & Tanamoto, K. (2005). Survey of formaldehyde, acetaldehyde and oligomers in polyethylene terephthalate food-packaging materials. Food Additives and contaminants, 22(8), 783–789.
  4. Frache, A., & Camino, G. (2012). Degradazione, stabilizzazione e ritardo alla fiamma di polimeri (Vol. 8). Edizioni Nuova Cultura. Golike, R. C., & Lasoski Jr, S. W. (1960). Kinetics of hydrolysis of polyethylene terephthalate films. The Journal of Physical Chemistry, 64(7), 895–898.
  5. McIntyre, J. E. (2005). Synthetic fibres: nylon, polyester, acrylic, polyolefin. Taylor & Francis US. Demirel, B., Kılıç, E., Yaraş, A., Akkurt, F., Daver, F., & Gezer, D. U. (2022). Effects of magnesium borate on the mechanical performance, thermal and chemical degradation of polyethylene terephthalate packaging material. Journal of Plastic Film & Sheeting, 87560879221097630. Sahoo, A., Gayathri, H. N., Sai, T. P., Upasani, P. S., Raje, V., Berkmans, J., & Ghosh, A. (2020). Enhancement of thermal and mechanical properties of few layer boron nitride reinforced PET composite. Nanotechnology, 31(31), 315706. Hwang, S.-H., Kim, Y. K., Seo, H.-J., Hong, S. H., Lim, S. K., Lee, S. H., & Kim, D.-K. (2019). The Morphological Effects of ZnO Upon the Antimicrobial and Deodorant Activities of Polyethylene Terephthalate/ZnO Composite Filaments. Journal of nanoscience and nanotechnology, 19(12), 7721–7728.
  6. Calvo, M. E., Castro Smirnov, J. R., & Míguez, H. (2012). Novel approaches to flexible visible transparent hybrid films for ultraviolet protection. Journal of Polymer Science Part B: Polymer Physics, 50(14), 945–956.
  7. Demirel, B., İnaner, N. B., Gezer, D. U., Daver, F., Yaras, A., & Akkurt, F. (2021). Chemical, thermal, and mechanical