Journals / Politeknik Dergisi / 2022 / Cilt: 25 - Sayı: 3

The Investigation of Flow Characteristics in Nanofluids Under Magnetic Field

Manyetik Alan Altinda Nanoakişkanlarin Akiş Karakteristiklerinin İncelenmesi

Pages
1309–1317
Publication Date
2022-10-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is concluded that an external magnetic field causes a deterioration in the velocity profiles of the nanofluid, especially in cobalt ferrite, while it does not have a significant effect on water.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The existence/application of an externally induced magnetic field, like in satellite cooling applications, causes a decrement in heat transfer when used with nanofluids.
📊
Key Findings & Data:All of the simulations were performed with ANSYS Fluent MHD module, for a concentration of 2%, Reynolds number of 10, and Hartmann numbers of 25, 50, and 150.
💡
Conclusion & Impact:It is concluded that an external magnetic field causes a deterioration in the velocity profiles of the nanofluid, especially in cobalt ferrite, while it does not have a significant effect on water.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Nanoakışkan · manyetik nanoakışkan · manyetohidrodinamik

Abstract

The existence/application of an externally induced magnetic field, like in satellite cooling applications, causes a decrement in heat transfer when used with nanofluids. This study investigates the flow characteristics and velocity profile of distilled water, alumina nanofluid, and cobalt ferrite ferrofluid in a horizontal cylindrical heat pipe flowing in a laminar regime and being exposed to an external magnetic field. All of the simulations were performed with ANSYS Fluent MHD module, for a concentration of 2%, Reynolds number of 10, and Hartmann numbers of 25, 50, and 150. The velocity profiles, pressure drops, and flow characteristics are examined by varying the magnetic field intensity while keeping all other parameters constant. It is concluded that an external magnetic field causes a deterioration in the velocity profiles of the nanofluid, especially in cobalt ferrite, while it does not have a significant effect on water. When the magnitude of the magnetic field is increased by 2 times, it is seen that the velocity of the fluid decreases by 6% and increasing the magnetic field from 0 to 50 Tesla causes a deceleration rate of 9%, which leads to the conclusion that application of a magnetic field for the first time has a more significant slowing effect when comparing it to increasing the magnetic field. In addition, when a magnetic field of 50 Tesla is considered, the maximum velocity of alumina is lower than that of water by 5.10%, and the maximum velocity of cobalt ferrite is lower by 28.57%.

Özet

Uydu soğutma uygulamalarında olduğu gibi, harici olarak indüklenen bir manyetik alanın varlığı/uygulanması, nanoakışkanlarla kullanıldığında ısı transferinde bir azalmaya neden olur. Sunulan çalışma, laminar rejim altında dış bir manyetik alana maruz kalan su, alumina nanoakışkanı ve kobalt ferrit nanoakışkanının akış davranışlarını ve hız profillerini incelemektedir. Analizler ANSYS Fluent MHD modülü kullanılarak gerçekleştirilmiştir. Nanoakışkanların konsantrasyonları %2, Reynolds sayısı 10, ve Hartmann sayısı da 25, 50, ve 150 olarak alınmıştır. Hız profilleri ve akış karakteristikleri, manyetik alan büyüklüğü dışındaki tüm değişkenler sabit tutularak incelenmiştir. Sonuç olarak, dış bir manyetik alan uygulamasının nanoakışkanların, özellikle de kobalt ferrit nanoakışkanının, hız profillerinde bozulmaya sebep olduğu, ancak su üzerinde kritik bir etkisinin bulunmadığı görülmüştür. Manyetik alan büyüklüğü 2 katına çıkarıldığında akışkan hızının %6 azaldığı, 0 Tesla olan manyetik alan büyüklüğü 50 Tesla’ya çıkarıldığında ise akışkan hızının %9 azaldığı görülmüştür. Bu doğrultuda, manyetik alan büyüklüğünü artırmanın etkisinin, manyetik alanı ilk kez uygulamanın etkisinden daha az olduğu saptanmıştır. Ayrıca, 50 Tesla için kıyaslama yapıldığında, elde edilen maksimum hızın alumina nanoakışkanı için suyunkinden %5.1, kobalt ferrit nanoakışkanı için de %28.57 daha az olduğu görülmüştür.

🔖

Cite This Article

AYTAÇ, Z. (2022). The Investigation of Flow Characteristics in Nanofluids Under Magnetic Field. Politeknik Dergisi, Cilt: 25 - Sayı: 3, 1309–1317. https://ajindex.com/articles/862659

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Choi, S., “Enhancing thermal conductivity of fluids with nanoparticles”, In: Proceedings of the 1995 ASME, International Mechanical Engineering Congress and Exposition, San Francisco, CA, USA, 12–17, 99–105, (1995)
  2. Wang, G., Zhang, Z., Wang, R. and Zhu, Z., “A Review on Heat Transfer of Nanofluids by Applied Electric Field or Magnetic Field”, Nanomaterials, 10, 2386, (2020)
  3. Aybar, H., Sharifpur, M., Azizian, M., Mehrabi, M. and Meyer, J., “A review of thermal conductivity models for nanofluids”, Heat Transfer Engineering, 36 (13), 1085-1110, (2015)
  4. Joubert, J., “Influence of a magnetic field on magnetic nanofluids for the purpose of enhancing natural convection heat transfer”. MSc. Thesis, University of Pretoria, (2017)
  5. Ramadan M.R.I., El-Sebaii A.A., Aboul-Enein S. and El-Bialy E., “Thermal performance of a packed bed double-pass solar air heater”, Energy, 32: 1524–1535, (2007)
  6. Hatamia, N., Kazemnejad Banaria, A., Malekzadehb, A. and Pouranfardc, A.R., “The effect of magnetic field on nanofluids heat transfer through a uniformly heated horizontal tube”, Physics Letters A, 381, 510–515, (2017)
  7. Shafiee, H., Nikzadeh Abbasi, E. and Soltani, M., “Numerical Study of the Effect of Magnetic Field on Nanofluid Heat Transfer in Metal Foam Environment”, Hindawi Geofluids, Volume 2021, (2021)
  8. Li, Q. and Xuan, Y., “Experimental investigation on heat transfer characteristics of magnetic fluid flow around a fine wire under the influence of an external magnetic field”, Experimental Thermal and Fluid Science, 33, 591–596, (2009)
  9. Syam Sundar, L., Singh, M. K. and Sousa, A. C. M., “Investigation of thermal conductivity and viscosity of Fe3O4 nanofluid for heat transfer applications”, International Communications in Heat and Mass Transfer, Volume 44, 7-14, (2013)
  10. Giwa, S.O., Sharifpur, M., Ahmadi, M.H. et al., “A review of magnetic field influence on natural convection heat transfer performance of nanofluids in square cavities”, J Therm Anal Calorim, 145, 2581–2623, (2021)
  11. Hariri, S., Mokhtari, M., Gerdroodbary, M.B. et al., “Numerical investigation of the heat transfer of a ferrofluid inside a tube in the presence of a non-uniform magnetic field”, Eur. Phys. J. Plus, 132, 65, (2017)
  12. Rezaei Gorjaei, A., Joda, F. and Khoshkhoo, H. R., “Heat transfer and entropy generation of water–Fe3O4 nanofluid under magnetic field by Euler–Lagrange method”, J Therm Anal Calorim, 139, 2023–2034, (2020)
  13. Kikura, H., Sawada,