Journals / Politeknik Dergisi / 2022 / Cilt: 25 - Sayı: 3

The Taguchi Optimization of Mechanical and Durability Properties of Accelerator Added Concrete

Priz Hızlandırıcı Katkılı Betonun Mekanik ve Dayanıklılık Özelliklerinin Taguchi Optimizasyonu

Pages
997–1006
Publication Date
2022-10-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The optimum mixture has been achieved by performing the required tests applied to mixture designs obtained from Taguchi optimization.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:It is very important to save time during the assembly of prefabricated elements.
📊
Key Findings & Data:However, it is highly difficult to determine proper ratio of the accelerator for the mixture without precasting significant number of concrete samples which requires time, manpower and material consumption.
💡
Conclusion & Impact:The optimum mixture has been achieved by performing the required tests applied to mixture designs obtained from Taguchi optimization.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Taguchi yöntemi · priz hızlandırıcılar · basınç dayanımı tahmini

Abstract

It is very important to save time during the assembly of prefabricated elements. In wet connection types, the setting time of the concrete might lead time lose. There are many studies investigates the methods to shorten the setting time of concrete. Especially in the recent years, there are accelerators developed to shorten concrete setting time without causing corrosion. However, the negative effect of accelerators on fresh concrete properties such as workability makes them difficult to use. In this study, it is aimed to produce a concrete mixture with high initial strength and workability by using an accelerator. However, it is highly difficult to determine proper ratio of the accelerator for the mixture without precasting significant number of concrete samples which requires time, manpower and material consumption. Therefore, Taguchi optimization is very useful method in order to reduce this number of samples and effort. The optimum mixture has been achieved by performing the required tests applied to mixture designs obtained from Taguchi optimization.

Özet

Prefabrike elemanların montajı sırasında zamandan tasarruf etmek çok önemlidir. Islak bağlantı türlerinde betonun priz alma süresi zamandan tasarruf edilmesini engellemektedir. Betonun priz süresini kısaltmak için literatürde birçok çalışma vardır. Özellikle son yıllarda korozyona neden olmadan beton priz süresini kısaltmak için geliştirilmiş priz hızlandırıcılar bulunmaktadır. Ancak priz hızlandırıcıların işlenebilirlik gibi taze beton özellikleri üzerindeki olumsuz etkisi, kullanımını zorlaştırmaktadır. Bu çalışmada, priz hızlandırıcı kullanılarak başlangıç dayanımı ve işlenebilirliği yüksek bir beton karışımı amaçlanmıştır. Bununla birlikte, kullanılacak priz hızlandırıcı oranını belirlemek için çok fazla karışım ortaya çıkmaktadır. Bu nedenle, Taguchi optimizasyonu ile karışım sayıları azaltılmıştır. Taguchi optimizasyonundan elde edilen karışım tasarımlarına gerekli testler yapılarak optimum karışım elde edilmiştir.

🔖

Cite This Article

ÇÖĞÜRCÜ, M. T., UZUN, M. (2022). The Taguchi Optimization of Mechanical and Durability Properties of Accelerator Added Concrete. Politeknik Dergisi, Cilt: 25 - Sayı: 3, 997–1006. https://ajindex.com/articles/862629

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Yang J., Guo T. and Chai S., "Experimental and numerical investigation on seismic behaviours of beam- column joints of precast prestressed concrete frame under given corrosion levels", Structures, 27: 1209–1221, (2020)
  2. Zhang C., Li H. and Gao W., "Development of a novel friction damped joint for damage-plasticity control of precast concrete walls", Engineering Structures, 219: 110850, (2020)
  3. Martin, Leslie D., and Christopher J. Perry E. "Precast and prestressed concrete", (Vol 1). PCI Design Handbook, Prestressed Concrete Institute, (2004)
  4. Shi C. and Day R.L., "Pozzolanic reaction in the presence of chemical activators. Part I. Reaction kinetics", Cement and Concrete Research, 30: 51–58, (2000)
  5. Singh N.B., Singh V.D., Rai S. and Chaturvedi S., "Effect of lignosulfonate, calcium chloride and their mixture on the hydration of RHA-blended portland cement" Cement and Concrete Research, 32: 387–392, (2002)
  6. Liu Z., Lou B., Barbieri D.M., Sha A., Ye T. and Li Y., "Effects of pre-curing treatment and chemical accelerators on Portland cement mortars at low temperature (5 °C)", Construction and Building Materials, 240: 117893, (2020)
  7. Yum W.S., Suh J Il., Sim S., Yoon S., Jun Y. and Oh J.E., "Influence of calcium and sodium nitrate on the strength and reaction products of the CaO-activated GGBFS system", Construction and Building Materials, 215: 839–848, (2019)
  8. Ghosh D., Abd-elssamd A., John Z. and Hun D., "Development of high-early-strength fiber-reinforced self-compacting concrete", Construction and Building Materials, 266: 121051, (2021)
  9. Chang C.Y., Huang R., Lee P.C. and Weng T.L., "Application of a weighted Grey-Taguchi method for optimizing recycled aggregate concrete mixtures", Cement and Concrete Composites, 33: 1038–1049, (2011)
  10. Fattahi Amirdehi H.R., Aliha M.R.M., Moniri A. and Torabi A.R., "Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – A statistical analysis", Construction and Building Materials, 213: 483–491, (2019)
  11. Aliha M.R.M. and Ayatollahi M.R., "Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading - A statistical approach", Theoretical and Applied Fracture Mechanics, 69: 17–25, (2014)
  12. Dantas A.T.A., Batista Leite M. and De Jesus Nagahama K., "Prediction of compressive strength of concrete containing construction and demolition waste using