Journals / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2022 / Cilt: 28 - Sayı: 7

Evaluation of photolitographic properties of functional groups containing polystyrenes

Fonksiyonel gruplu polistirenlerin fotolitografik özelliklerinin incelenmesi

Pages
993–1000
Publication Date
2022-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Although AAPS gives lower dissolution values than virgin PS but no significant change was observed in dissolution values after UVirradiation and it was determined that AAPS did not present photoresist properties.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, different molecular weighted PSs were chemically modified by two functional modifiers (maleic anhydride (MA) and acetic anhydride (AA)) under optimum reaction conditions with BF3O(C2H5)2 catalyst and the bonding of active functional groups (MAPS: -CO-CH=CH-COOH and AAPS: -CO-CH3) to the aromatic ring of the polymer was carried out.
📊
Key Findings & Data:As a result, the optimum reaction conditions was found to be as PS:modifier mole ratio 1:0.2; modifier:catalyst molar ratio 1:1 and it was determined that more functional groups were attached to the structure of lower molecular weighted PS.
💡
Conclusion & Impact:Although AAPS gives lower dissolution values than virgin PS but no significant change was observed in dissolution values after UVirradiation and it was determined that AAPS did not present photoresist properties.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Fotorezist · polistiren · modifikasyon

Abstract

In this study, different molecular weighted PSs were chemically modified by two functional modifiers (maleic anhydride (MA) and acetic anhydride (AA)) under optimum reaction conditions with BF3O(C2H5)2 catalyst and the bonding of active functional groups (MAPS: -CO-CH=CH-COOH and AAPS: -CO-CH3) to the aromatic ring of the polymer was carried out. Depending on the structure of the carboxyl and acetyl groups attached to the aromatic ring, the photolithographic properties were examined by solubility and FT-IR analysis, also the effect of borneol, which is used as a sensitizer-activator, on photolithographic properties was investigated. As a result, the optimum reaction conditions was found to be as PS:modifier mole ratio 1:0.2; modifier:catalyst molar ratio 1:1 and it was determined that more functional groups were attached to the structure of lower molecular weighted PS. It was determined that modified PSs dissolved less in toluene than virgin PS (70.04% and 85.48% respectively). In dissolution tests performed after irradiation, the best value was obtained from MAPS (54.51%), while there was no significant change in the dissolution values of AAPS (83.46%). However the solubility value of MAPS decreased to 49.67% with the irradiation process performed after the addition of borneol substance but there was no significant change in the solubility values of AAPS (84.50%). In addition, it was observed that the dissolution values decreased depending on the irradiation time in MAPS, but it was not observed in AAPS. The decrease in dissolution of MAPS after UV irradiation has proven that MAPSs are light sensitive and they are negative photoresists that crosslinked by light effect. It was observed that the borneol also supports the photoresist feature. Although AAPS gives lower dissolution values than virgin PS but no significant change was observed in dissolution values after UVirradiation and it was determined that AAPS did not present photoresist properties.

Özet

Bu çalışmada farklı molekül kütleli PS’lerin fonksiyonel modifikatörlerle (maleik anhidrit (MA) ve asetik anhidrit (AA)), BF3O(C2H5)2 katalizörlüğünde optimum reaksiyon şartlarında kimyasal modifikasyonu yapılmış ve aromatik halkasına aktif fonksiyonel gruplar (MAPS: -CO-CH=CH-COOH ve AAPS: -CO-CH3) bağlanmıştır. Sentezlenen modifiye PS’lere bağlanan karboksil ve asetil grupların yapısına bağlı olarak fotolitografik özellikleri, çözünürlük tayini ve FTIR analizi ile incelenmiş ayrıca sensibilizatör-aktivatör borneol maddesinin fotolitografik özellikler üzerindeki etkisi araştırılmıştır. Sonuçta optimum reaksiyon şartları PS: modifikatör mol oranı 1:0.2; modifikatör: katalizör mol oranı 1:1 olarak bulunmuş ve düşük molekül ağırlıklı PS’lerin yapısına daha fazla fonksiyonel grup bağlandığı tespit edilmiştir. Modifiye PS’lerin toluende PS’ye göre daha az çözündüğü (sırasıyla %70.04 ve %85.48) tesbit edilmiştir. Işınlamadan sonra yapılan çözünürlük testlerinde en iyi değer %54.51 ile MAPS’den elde edilirken AAPS’nin çözünürlük değerlerinde dikkate değer bir değişim olmamıştır (%83.46). Borneol maddesinin ilavesinden sonra yapılan ışınlama işlemiyle MAPS’nin çözünürlük değeri %49.67’ye kadar düşerken, AAPS’nin çözünürlük değerlerinde önemli bir değişim olmamıştır (%84.50). Ayrıca MAPS’lerde ışınlama süresine bağlı olarak çözünürlük değerlerinde azalma gözlemlenirken bu durum AAPS’lerde görülmemiştir. UV ışınlama sonrasında MAPS’lerin çözünürlüğündeki azalma MAPS’lerin ışığa duyarlılık özelliği gösterdiğini ve ışınlama etkisiyle çapraz bağlanma yeteneğine sahip negatif fotorezist olduğunu göstermiştir. Borneol’ün de fotorezist özelliği desteklediği görülmüştür. AAPS’ler ise PS’ye göre daha düşük çözünürlük değerleri vermesine karşın UV-ışınlamadan sonra çözünürlük değerlerinde dikkate değer bir değişiklik görülmemiş ve AAPS’lerin fotorezist özellik göstermediği belirlenmiştir.

🔖

Cite This Article

CERİT, A. (2022). Evaluation of photolitographic properties of functional groups containing polystyrenes. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 28 - Sayı: 7, 993–1000. https://ajindex.com/articles/862543

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Hakim ML. “Synthesis of phenolic-based resist materials for photolithography”. Oriental Journal of Chemistry, 32(1), 165-170, 2016
  2. Yang R, Soper SA, Wang W. “A new UV lithography photoresist based on composite of EPON resins 165 and 154 for fabrication of high aspect ratio microstructures’’. Sensors and Actuators A: Physical, 135(2), 625-636, 2007
  3. Sharma M, Naik AA, Raghunathan P, Eswaran SV. “Evaluation of microlithographic performance of ‘deep UV’ resists: Synthesis, and 2D NMR studies on alternating ‘high ortho’novolak resins”. Journal of Chemical Sciences, 124(2), 395-401, 2012
  4. Crabtree RH. The Organometallic Chemistry of the Transition Metals. 5th ed. NewYork, USA, John Wiley & Sons, 2009
  5. IUPAC. Photosensitive Polymer: Compendium of Chemical Terminology. 2nd ed. Cambridge, UK, IUPAC, 2004
  6. Söğütlü C, Sönmez A. “The effect of UV lights on color changes on some local wood processed with differential preservatives”. Journal of the Faculty of Engineering and Architecture of Gazi University. 21(1), 151-159, 2006
  7. Tandoğan B, Eker Şanlı G. “Removal PCBs in soil using of H2O2 during UVA applications”. Journal of the Faculty of Engineering and Architecture of Gazi University, 36(2), 779-792, 2021
  8. Zhang L, Li P, Gong Z, Li X. “Photocatalytic degradation of polycyclic aromatic hydrocarbons on soil surfaces using TiO2 under UV light”. Journal of Hazardous Materials, 158(2-3), 478-484, 2008
  9. Köysüren Ö, Köysüren HN. “Preparation of polyvinyl alcohol composite nanofibers and solid-phase photocatalytic degradation of polyvinyl alcohol”. Journal of the Faculty of Engineering and Architecture of Gazi University, 33(4), 1411-1418, 2018
  10. Barakat MA, Kumar R. Photocatalytic activity enhancement of titanium dioxide nanoparticles. 1st ed. Cham, Switzerland, Springer, 2016
  11. Karaca G, Taşdemir Y. “Removal of polycyclic aromatic hydrocarbons (PAHs) from organized industry district treatment sludges with photochemıcal degradation: ambient air applications”. Journal of the Faculty of Engineering and Architecture of Gazi University, 30(4), 557-565, 2015
  12. Subramanian K, Krishnasamy V, Nanjundan S, Reddy AR. “Photosensitive polymer: synthesis, characterization and properties of a polymer having pendant photo crosslinkable group”. European Polymer Journal, 36(11), 2343-2350, 2000
  13. Nagata M, Inaki K. “Synthesis and characterization of photocrosslinkable poly (l-lactide) s with a pendent cinnamate group”. European Polymer