SavedAdd your journal

Journals / İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi / 2022 / Cilt: 21 - Sayı: 42

EVALUATION OF CURING TIME FOR MICRO CONCRETE MIXES CONTAINING SILICA FUME, NANO-SILICA AND FLY ASH

SİLİKA DUMANI, NANO-SİLİKA VE UÇUCU KÜL İÇEREN MİKRO BETON KARIŞIMLARI İÇİN KÜR SÜRESİNİN DEĞERLENDİRİLMESİ

Serkan ETLİ
Pages
304–316
Publication Date
2022-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show that both flexural and compressive strengths of micro concretes increased after 28 days thanks to water curing.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Within the scope of the study, research on the use of silica fume (SF), nano silica (NS) and fly ash (FA) together or separately in the production of micro concrete is presented.
📊
Key Findings & Data:While cement dosage and water/binder ratio in the mixtures were chosen as 670 kg/m3 and 0.53 respectively, the amount of SF, FA and NS was limited to 150 kg/m3 in total.
💡
Conclusion & Impact:The results show that both flexural and compressive strengths of micro concretes increased after 28 days thanks to water curing.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Micro Beton · Silis Dumanı · Nano Silika

Abstract

Within the scope of the study, research on the use of silica fume (SF), nano silica (NS) and fly ash (FA) together or separately in the production of micro concrete is presented. It is aimed to examine the changes in mechanical properties because of water and air curing in mixtures produced using SF, FA, and NS. While cement dosage and water/binder ratio in the mixtures were chosen as 670 kg/m3 and 0.53 respectively, the amount of SF, FA and NS was limited to 150 kg/m3 in total. In the study, samples were produced using 40x40x160 mm prism molds. All samples were divided into two different groups after 7 days of water curing and water (1st group) and air (2nd group) were applied up to 56 days. Flexural and compressive strength tests were performed on the water and air cured specimens for 7-56 days and 28-56 days, respectively. In addition, the porosity and unit volume weight values of the samples were examined. The results show that both flexural and compressive strengths of micro concretes increased after 28 days thanks to water curing.

Özet

Çalışma kapsamında mikro beton üretiminde silis dumanı (SD), nano silika (NS) ve uçucu külün (UK) birlikte veya ayrı ayrı kullanımına yönelik araştırmalar sunulmaktadır. SD, UK ve NS kullanılarak üretilen karışımlarda su ve hava kürlenmesi nedeniyle mekanik özelliklerde meydana gelen değişikliklerin incelenmesi amaçlanmaktadır. Karışımlarda çimento dozajı ve su/bağlayıcı oranı sırasıyla 670 kg/m3 ve 0.53 olarak seçilirken SD, UK ve NS miktarı toplamda 150 kg/m3 ile sınırlandırılmıştır. Çalışmada 40x40x160 mm prizma kalıpları kullanılarak numuneler üretilmiştir. Tüm numuneler 7 gün su küründen sonra iki farklı gruba ayrıldı ve 56 güne kadar su (1. grup) ve hava (2. grup) uygulandı. Su ve hava ile kürlenen numunelere sırasıyla 7-56 gün ve 28-56 gün boyunca eğilme ve basınç dayanımı testleri yapılmıştır. Ayrıca numunelerin gözeneklilik ve birim hacim ağırlık değerleri incelenmiştir. Sonuçlar, su kürü sayesinde mikro betonların hem eğilme hem de basınç dayanımlarının 28 gün sonra arttığını göstermektedir.

🔖

Cite This Article

ETLİ, S. (2022). EVALUATION OF CURING TIME FOR MICRO CONCRETE MIXES CONTAINING SILICA FUME, NANO-SILICA AND FLY ASH. İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi, Cilt: 21 - Sayı: 42, 304–316. https://ajindex.com/articles/860407

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Al-Amoudi, O. S. B., Maslehuddin, M., & Abiola, T. O. (2004). Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather. Construction and Building Materials, 18(10), 737–743. https://doi.org/10.1016/j.conbuildmat.2004.04.031
  2. Aldridge, W. W., & Breen, J. E. (1970). Useful techniques in direct modeling of reinforced concrete structures. American Concrete Institute, ACI Special Publication, SP-024, 125–140.
  3. ASTM. (2009). Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency. ASTM International, 04, 3. https://www.astm.org/Standards/C305 ASTM C348-19. (2018). Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars. Annual Book of ASTM Standards, 03(Reapproved), 98–100. ASTM C349-08. (2014). Standard test method for compressive strength of hydraulic-cement mortars (using portions of prisms broken in flexure). Annual Book of ASTM Standards, 1–4. ASTM C642-13. (2014).
  4. Standard Test Method for Density, Absorption, and Voids in Hardened Concrete. Annual Book of ASTM Standards. Biricik, H., & Sarier, N. (2014). Comparative study of the characteristics of nano silica-, silica fume- and fly ash-incorporated cement mortars. Materials Research, 17(3), 570–582. https://doi.org/10.1590/S1516-14392014005000054
  5. Dhir, R., & Roderick Jones. (1996).
  6. Concrete Repair, Rehabilitation and Protection. Concrete Repair, Rehabilitation and Protection. https://doi.org/10.4324/9780203476635
  7. Fahmy, M., Abu El-Hassan, M., Kamh, G., & Bashandy, A. (2020).
  8. Investigation of Using Nano-silica, Silica Fume and Fly Ash in High Strength Concrete. ERJ. Engineering Research Journal, 43(3), 211–221. https://doi.org/10.21608/erjm.2020.95144
  9. Felekoğlu, B. (2009). High Performance Micro Concrete Design. Gaitero, J. J., Campillo, I., Mondal, P., & Shah, S. P. (2010). Small changes can make a great difference. Transportation Research Record, 2141, 1–5. https://doi.org/10.3141/2141-01
  10. Garboczi, E. J. (2009). Concrete Nanoscience and Nanotechnology: Definitions and Applications. Nanotechnology in Construction 3, 81–88. https://doi.org/10.1007/978-3-642-00980-8_9
  11. Hou, P. K., Kawashima, S., Wang, K. J., Corr, D. J., Qian, J. S., & Shah, S. P. (2013). Effects of colloidal nanosilica on rheological and mechanical properties of fly ash-cement mortar. Cement and Concrete Composites, 35(1), 12–22. https://doi.org/10.1016/j.cemconcomp.2012.08.027
  12. Jalal, M., Pouladkhan, A., Harandi, O. F., & Jafari, D. (2015). Com