SavedAdd your journal

Journals / International Journal of Innovative Engineering Applications / 2022 / Cilt: 6 - Sayı: 2

Corner Reflector (CR) Installation and Controlling of Permanent Scatterer (PS) in Mine Sites

Maden Sahalarında Köşe Reflektör (CR) Tesisi ve Sabit Saçıcı (PS) Kontrolü

Bekir POYRAZ
Yavuz GÜL
Pages
297–302
Publication Date
2022-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show us that; placing corner reflectors in locations where sufficient PS cannot be made or not determined at all, increases the number and quality of PS positively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Deformations in mining areas have been started to be monitored by satellite SAR-based methods, which have recently emerged as an alternative to classical methods (GNSS receivers, Geometric Leveling, Terrestrial Lidar, UAV Photogrammetry, etc.).
📊
Key Findings & Data:By considering the area through Sentinel-1A/B satellites, new PSs constituted by employing the CR facility has been successfully observed in locations, where PS could not be produced before.
💡
Conclusion & Impact:The results show us that; placing corner reflectors in locations where sufficient PS cannot be made or not determined at all, increases the number and quality of PS positively.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Deformasyon · InSAR · Köşe Reflektör (CR)

Abstract

Deformations in mining areas have been started to be monitored by satellite SAR-based methods, which have recently emerged as an alternative to classical methods (GNSS receivers, Geometric Leveling, Terrestrial Lidar, UAV Photogrammetry, etc.). The most important advantage of this method is that quite wide areas can be monitored remotely. However, the mentioned way also has some disadvantages. The first of these; deformations can only be determined in the direction of the Satellite Line Of Sight (LOS), and the second one is that there is no correlated reflective surface due to the continuous change of topography in the locations where mining activities are carried out. Within the framework of this study, it is aimed to monitor PS by placing corner reflectors (CR) in the locations where sufficient Permanent Scatterer (PS) cannot be produced in Kalburçayırı and Hamal Coal Fields of Kangal Thermal Reactor Elektric production A.Ş. By considering the area through Sentinel-1A/B satellites, new PSs constituted by employing the CR facility has been successfully observed in locations, where PS could not be produced before. The results show us that; placing corner reflectors in locations where sufficient PS cannot be made or not determined at all, increases the number and quality of PS positively.

Özet

Maden sahalarındaki deformasyonlar son zamanlarda, klasik yöntemlerin (GNSS alıcıları, Geometrik Nivelman, Yersel Lidar ve İHA Fotogrametresi vb.) alternatifi olarak ortaya çıkmaya başlayan uydu SAR tabanlı yöntemler ile izlenmeye başlanmıştır. Bu yöntemin en önemli avantajı, oldukça geniş alanların, alansal olarak uzaktan izlenebiliyor olmasıdır. Buna rağmen yöntem, bazı dezavantajlar da içermektedir. Bunlardan ilki; deformasyonların sadece uydu bakış doğrultusu yönünde (LOS) belirlenebiliyor olması, ikincisi ise maden kazı faaliyetlerinin bulunduğu lokasyonlarda topoğrafyanın sürekli değişimine bağlı olarak eşlenik yansıtıcı yüzey bulunamamasıdır. Bu çalışma kapsamında, Kangal Termik Santral Elektrik Üretim A.Ş.’nin Kalburçayırı ve Hamal Kömür sahalarında sabit saçıcı (PS) olmayan lokasyonlara, köşe reflektörler (CR) yerleştirilerek PS takibi amaçlanmıştır. Sentinel-1A/B uyduları vasıtası ile saha takip edilerek daha önce PS üretilemeyen lokasyonlarda CR tesisi ile oluşan yeni PS’ler başarı ile gözlemlenmiştir. Sonuçlar bize göstermiştir ki; yeterince PS üretilemeyen veya hiç görülmeyen lokasyonlara köşe reflektör yerleştirilmesi, PS sayısını ve kalitesini olumlu yönde artırmaktadır.

🔖

Cite This Article

POYRAZ, B., GÜL, Y. (2022). Corner Reflector (CR) Installation and Controlling of Permanent Scatterer (PS) in Mine Sites. International Journal of Innovative Engineering Applications, Cilt: 6 - Sayı: 2, 297–302. https://ajindex.com/articles/860013

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Poyraz, F., GÜL, Y., & Duymaz, B. (2020). Determination of deformations by using the PSI technique at a common dump site of three different open-pit marble mines in Turkey. Turkish Journal of Earth Sciences, 29(6). Ferretti, A., Prati, C., Rocca, F. (2001). Permanent Scatterers in SAR interferometry. IEEE Trans Geosci Remote Sens 39(1):8–20. doi: 10.1109/36.898661 Colesanti, C., Ferretti, A., Novali, F., Prati, C., Rocca, F. (2003a). SAR monitoring of progressive and seasonal ground deformation using the permanent scatterers technique. IEEE Transactions on Geoscience and Remote Sensing 41 (7): 1685-1701. doi: 10.1109/TGRS.2003.813278 Colesanti, C., Ferretti, A., Prati, C., Rocca, F. (2003b). Monitoring landslides and tectonic motions with the Permanent Scatterers Technique. Engineering Geology 68 (1-2): 3-14. doi: 10.1016/ S0013-7952(02)00195-3
  2. Canuti, P., Casagli, N., Ermini, L., Fanti, R., Farina, P. (2004). Landslide activity as a geoindicator in Italy: significance and new perspectives from remote sensing. Environmental Geology 45 (7): 907-919. doi: 10.1007/s00254-003-0952-5
  3. Colesanti, C., Wasowski, J. (2004). Satellite SAR interferometry for wide-area slope hazard detection and site-specific monitoring of slow landslides. In: Proceedings of the Ninth International Symposium on Landslides; Rio de Janeiro, Brazil. (pp. 795-802).
  4. Ferretti, A., Prati, C., Rocca, F., Casagli, N., Farina, P. et al. (2005). Permanent Scatterers technology: a powerful state of the art tool for historic and future monitoring of landslides and other terrain instability phenomena. In: International Conference on Landslide Risk Management; Vancouver, Canada. (pp. 1-9).
  5. Gündoğdu, B., Erdoğan, H., & Oktar, O. (2021). Investigation of Disasters with Different InSAR Methods. Turkish Journal of Geosciences, 2(1), 33-45.
  6. Hooper, A., Segall, P., Zebker, H. (2007). Persistent scatterer interferometric synthetic aperture radar for crustal deformation analysis, with application to Volca´n Alcedo, Gala´pagos. Journal of Geophysical Research 112: B07407. doi: 10.1029/2006JB004763 Poyraz, F., & Hastaoğlu, K. Ö. (2020). Monitoring of tectonic movements of the Gediz Graben by the PSInSAR method and validation with GNSS results. Arabian Journal of Geosciences, 13(17), 1-11. doi:10.1007/s12517-020-05834-5
  7. Ferretti, A. (2014). Satellite InSAR data: reservoir monitoring from space. EAGE publications. ISBN 978-90-73834-71-2, 178s,Netherlands Froese, C., Poncos, V., Skirrow, R., Mansour, M., & Martin