SavedAdd your journal

Journals / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2022 / Cilt: 10 - Sayı: 5

Investigation of the Effects of Active ZnO Instead of Conventional ZnO on Some Physico- mechanical Properties in Tires Compounds

Lastik Karışımlarında Klasik ZnO Yerine Aktif ZnO Kullanımının Bazı Fizikomekanik Özelliklere Etkilerinin Araştırılması

Gasim ALTUNDAL
İlyas UYGUR
Tuğçe GÖRMÜŞER
Hüsnü GERENGİ
Metin KURU
Esra ÇETİN
Pages
107–113
Publication Date
2022-12-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results revealed differences of up to 20% in mechanical tests, 5% in total product weight, and 2% in cost, with a preference for active ZnO with ahigher surface area.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Additives used in the manufacture of rubber-based products which they are partially separated from the product depending on the time, the physical and chemical effects it is exposed to.
📊
Key Findings & Data:These additives, which are separated from the products, reduce the performance and long-term useful life of the manufactured product.
💡
Conclusion & Impact:Results revealed differences of up to 20% in mechanical tests, 5% in total product weight, and 2% in cost, with a preference for active ZnO with ahigher surface area.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Aktif ZnO · Aktivatör · Kauçuk

Abstract

Additives used in the manufacture of rubber-based products which they are partially separated from the product depending on the time, the physical and chemical effects it is exposed to. These additives, which are separated from the products, reduce the performance and long-term useful life of the manufactured product. In this study, the cost-performance properties of rubber materials produced using active ZnO and normal ZnO were investigated. Results revealed differences of up to 20% in mechanical tests, 5% in total product weight, and 2% in cost, with a preference for active ZnO with ahigher surface area.

Özet

Kauçuk esaslı ürünlerin imalatında kullanılan katkı malzemeleri; zamana, maruz kaldığı fiziksel ve kimyasal etkilere bağlı olarak üründen kısmen ayrılmaktadırlar. Ortamdan ayrılan bu katkı malzemeleri imal edilen mamulün performansını ve uzun sürede kullanım ömrünü azaltmaktadır. Bu çalışmada aktif ZnO ile normal ZnO kullanılarak üretilen kauçuk malzemelerin maliyet –performans özellikleri incelenmiştir. Bulgular daha yüksek yüzey alanına sahip aktif ZnO tercihiyle, mekanik testlerde %20, toplam mamul ağırlığında %5 ve maliyette %2’e varan bir farklılık hesaplanmıştır.

🔖

Cite This Article

ALTUNDAL, G., UYGUR, İ., GÖRMÜŞER, T., GERENGİ, H., KURU, M., ÇETİN, E. (2022). Investigation of the Effects of Active ZnO Instead of Conventional ZnO on Some Physico- mechanical Properties in Tires Compounds. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 10 - Sayı: 5, 107–113. https://ajindex.com/articles/858973

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. H. Gerengi, H.Goksu, Plastik Malzeme Teknolojisi, 1. Baskı, Ankara, Türkiye, Seçkin Akademik ve Mesleki Yayınlar, 2019, ss. 28-30
  2. J. Walter, “In recent years the presence of zinc oxide in the tread compounds has come under growing scrunity because of environmental concerns,” Tire Tech. Int. vol. 18, pp. 18-19, 2009
  3. P. Banerjee, P. K. Jain, “Mechanism of sulfidation of small zinc oxide nanoparticles,” RSC Adv., vol. 8, pp. 34476–34482, 2018
  4. M. Rashvand, Z. Ranjbar, S. Rastegar, “Nano zinc oxide as a UV-stabilizer for aromatic polyurethane coatings,” Progress in Organic Coatings, vol. 71, pp. 362-368, 2011 [5] G. Tyer, J. G. Helm, U.S. Pat. 6,066 (1849)
  5. S.W.K. Morgan, “ Zinc and its alloy and compounds ”, Ellis Horwood Ltd., England, 1985
  6. R.N. Shreve, “ Chemical Process Industries ”, McGraw-Hill, Chem. Eng., Chem. Eng. Series, pp. 434-436, 1967
  7. H. Wang, R.I.Wick, and B. Xing, “Toxicity of nanoparticulate and bulk ZnO, Al2O3 and TiO2, to the nematode Caenorhabditis elegans,” Environmental Pollution, vol. 157,pp. 1171-1177, 2009
  8. G. Heideman, “Reduced Zinc Oxide Levels in Sulphur Vulcanization of Rubber Compounds,” Ph.D. thesis, University of Twente, Enschede, the Netherlands, 2004
  9. N. Vatansever and S. Polat, “Effect of Zinc oxide type on ageing properties of SBR compounds,” Materials and Design, vol. 31, pp. 1533-1539, 2010
  10. P. Sapradit, P. Buapet, S. Kongseng, S. Peerakietkhajorn, “Temperature and concentration of ZnO particles affect life history tarits and oxidative stress in daphnia magna,” Aquatic Toxicology, vol. 224, 2020
  11. G. Altundal, H. Gerengi, E. Çetin, U. Kapcak, K. Kaymaz “Performans Bisiklet Lastiği Sırt Karışımının Geliştirilmesi ve Özelliklerinin İncelenmesi”, Düzce Üniversitesi Bilim ve Teknoloji Dergisi, c. 8, ss. 1661-1675, 2020
  12. P. A. Ciullo, N. Hewitt, “The Rubber Formulary,” Plastics Design Library, William Andrew, pp. 56-57, 1999.