Journals / Firat University Journal of Experimental and Computational Engineering / 2022 / Cilt: 1 - Sayı: 3

Failure mechanism of a soil slope and stabilization method: a case study

Pages
129–138
Publication Date
2022-10-28
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the slope stability problem considered, the benching method has been proposed as an improvement method, and additionally, suggestions have been made for the disposal of surface waters by drainage methods.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the slope stability problem, which occurred when the projected excavation works of a treatment plant has been started, has been examined.
📊
Key Findings & Data:The analyzes are carried out by Slide V.6.0. software which is based on limit equilibrium methods and Bishop Method was preferred.
💡
Conclusion & Impact:In the slope stability problem considered, the benching method has been proposed as an improvement method, and additionally, suggestions have been made for the disposal of surface waters by drainage methods.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Limit equilibrium · Slide · Slope stability

Abstract

In this study, the slope stability problem, which occurred when the projected excavation works of a treatment plant has been started, has been examined. The aim of this study is to determine the conditions causing the slope failure and to make the slope stable again. Then, to ensure the stability of the whole slope after all the excavations work in the project area have been completed. For this purpose, firstly, the topographic features of the slope where the failure took place were determined and a model of the failure condition was created. Field and laboratory studies were used to obtain the data to be used in slope modeling. Models reflecting the current situation were analyzed considering static and dynamic conditions and a safe slope design was created. The analyzes are carried out by Slide V.6.0. software which is based on limit equilibrium methods and Bishop Method was preferred. As a result, it was determined that the reason of the failure occurred was the change of the soil’s physical and mechanical parameters due to precipitation. In the slope stability problem considered, the benching method has been proposed as an improvement method, and additionally, suggestions have been made for the disposal of surface waters by drainage methods.

🔖

Cite This Article

KANIK, M. (2022). Failure mechanism of a soil slope and stabilization method: a case study. Firat University Journal of Experimental and Computational Engineering, Cilt: 1 - Sayı: 3, 129–138. https://ajindex.com/articles/852085

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Zhang J, Kuang M, Zhang Y, Feng T. “Evaluation and analysis of the causes of a landslide and treatment measures during the excavation of a tunnel through a soil-rock interface”. Eng. Fail. Anal., 130, 105784, 2021
  2. Guzzetti F, Carrara A, Cardinali M, Reichenbach P. “Landslide hazard evaluation: A review of current techniques and their application in a multi-scale study, Central Italy”. Geomorphology, 31, 181-216, 1999
  3. García-Rodríguez MJ, Malpica JA, Benito B, Díaz M. “Susceptibility assessment of earthquake-triggered landslides in El Salvador using logistic regression”. Geomorphology, 95, 172-191, 2008
  4. Rai, R. Factors affecting slope failure. Lecture Notes of Chapter 2, 2017
  5. Das BM. Principles of Geotechnical Engineering. Boston: Cengage Learning. 9nd ed. USA, 1994
  6. Akbulut İ, İlker ÇAM, Aksoy T, Çağlan D, Ölmez, T. “Açık ocaklarda şev duraysızlığı ve geriye dönük analizlere bir örnek: Afşin-Elbistan Kışlaköy açık kömür ocağı”. Maden Tetkik ve Arama Dergisi, 147(147), 115-126, 2013
  7. Duncan JM, Wright SG. “Soil strength and slope stability”. New York: John Wiley and Sons, Inc., 2005
  8. Zhang J, Tang WH, Zhang LM. “Efficient probabilistic back-analysis of slope stability model parameters”. Journal of Geotechnical and Geoenvironmental Engineering, 136(1), 99-109, 2010
  9. Alemdag S, Kaya A, Karadag,M, Gurocak Z, Bulut F. “Utilization of the limit equilibrium and finite element methods for the stability analysis of the slope debris: an example of the Kalebasi District (NE Turkey)”. Journal of African Earth Sciences, 106, 134-146, 2015
  10. Kaya A, Alemdağ S, Dağ S, Gürocak Z. “Stability assessment of high-steep cut slope debris on a landslide (Gumushane, NE Turkey)”. Bulletin of Engineering Geology and the Environment, 75(1), 89-99, 2016
  11. Alemdağ S. “Toprak dolgulu barajlarda gövde duraylılığının limit denge ve sayısal analiz yöntemleri ile değerlendirilmesi: Türkiye’den bir atık barajı örneği”. Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 6(2), 157-173, 2016
  12. Gör M. “Limit denge analizi (Bishop Yöntemi) ile kütle hareketinin mekanizması ve önlem yapısının analizi: Van ili örneği”. Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 11(2), 597-608, 2021
  13. Taher NR, Gör M, Aksoy HS, Awlla HA. “Numerical investigation of the effect of slope angle and height on the stability of a slope composed of sandy soil”. Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 12(2), 664-675, 2022
  14. Chowdhu