Journals / Yapı Bilgi Modelleme / 2020 / Cilt: 2 - Sayı: 2

Comparison of Traditional Quantity Take-Off (QTO) and Software within the Scope of Building Information Modeling (BIM)

Yapı Bilgi Modellemesi (YBM) Kapsamında Geleneksel Metraj ile Yazılımın Karşılaştırılması

Pages
58–65
Publication Date
2020-10-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Thus, besides the validity of these software, their advantages and disadvantages were determined.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Optimization of cost, duration, and quality are accepted as the basic requirements in modern construction projects.
📊
Key Findings & Data:Obtaining realistic quantity take-off (QTO) data is also a basic requirement in terms of planning the cost and duration accurately; since incorrect QTO causes incorrect cost estimation and scheduling.
💡
Conclusion & Impact:Thus, besides the validity of these software, their advantages and disadvantages were determined.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Yapı tasarımı · Planlama · Metraj

Abstract

Optimization of cost, duration, and quality are accepted as the basic requirements in modern construction projects. Especially the decisions taken during the planning phase are of great importance in order to minimize the problems in the construction process. Obtaining realistic quantity take-off (QTO) data is also a basic requirement in terms of planning the cost and duration accurately; since incorrect QTO causes incorrect cost estimation and scheduling. Error-prone traditional QTO methods can take a long time depending on the project details. The developing technology directs Turkish construction companies to switch to Building Information Modeling (BIM) from computer-aided design (CAD) for more effective planning. However, the traditionalist and introverted nature of the construction sector in Turkey slows down the process of transition. In this study, a (Basement+Ground+3 Normal floor) housing project was modeled with two software, which are widely used on the basis of BIM. The obtained QTOs were compared with the QTOs calculated by the traditional method. Thus, besides the validity of these software, their advantages and disadvantages were determined.

Özet

Modern inşaat projelerinde maliyet, süre ve kalite optimizasyonu en temel gereklilik olarak kabul edilmektedir. Özellikle planlama aşamasında alınan kararlar, yapım sürecindeki problemlerin minimize edilebilmesi açısından büyük önem taşımaktadır. Gerçekçi metraj verilerinin elde edilebilmesi de özellikle yapım maliyeti ve proje süresinin doğru olarak planlanabilmesi açısından temel koşuldur. Zira metrajın hatalı yapılması, ön keşfin ve iş programının da hatalı hazırlanmasına sebep olur. Sıkça hata yapılabilen geleneksel metraj yöntemleri, proje detayına bağlı olarak uzun süreler alabilmektedir. Gelişmekte olan teknoloji ile birlikte, tüm dünyada olduğu gibi Türkiye'deki inşaat firmaları da projeleri için daha etkin planlama yapabilmek adına bilgisayar destekli tasarım (BDT) sistemlerinden Yapı Bilgi Modellemesi (YBM) temelli çalışma yöntemlerine geçiş yapmaktadırlar. Ancak Türkiye'de inşaat sektörünün gelenekçi ve içe kapanık yapısı, bu geçiş sürecini yavaşlatmaktadır. Bu çalışmada, B+Z+3N katlı bir konut projesi, YBM temelinde yaygın olarak kullanılmakta olan iki yazılım ile modellenerek, elde edilen kaba ve ince imalat metraj verileri, geleneksel yöntemle hesaplanan metraj verileri ile kıyaslanmıştır. Böylece bu yazılımların geçerliliklerinin yanında avantaj ve dezavantajları da belirlenmeye çalışılmıştır.

🔖

Cite This Article

BAYRAM, S. (2020). Comparison of Traditional Quantity Take-Off (QTO) and Software within the Scope of Building Information Modeling (BIM). Yapı Bilgi Modelleme, Cilt: 2 - Sayı: 2, 58–65. https://ajindex.com/articles/847984

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Altınay, Ş., 2014. Merkez Ofis Giderlerinin Tespitinde Kullanılan Yöntemler ve İnşaat Sektöründe Bir Uygulama. Yüksek Lisans Tezi, İstanbul Kültür Üniversitesi,
  2. İstanbul.
  3. Atak Argun, A., 2017. İnşaat Sektöründe BIM Kullanımı ve Avantajları, https://epy.com.tr/tr-insaat-sektorunde-bim-kullanimi-ve-avantajlari-95 (Son erişim Tarihi: 24.02.2021)
  4. Bayram, S., 2019. Yaklaşık metraj birim ölçülerinin yapım işi projelerindeki geçerliliğinin araştırılması, International Conference on Innovation, Sustainability, Technology and Education in Civil Engineering (iSTE-CE'2019), 13-15
  5. Haziran, Hatay, 774-789. BIMgenius, 2018. Türkiye BIM Raporu: Genel Eğilim ve Beklentiler Araştırma Raporu, https://www.bimgenius.org/ (Son erişim Tarihi: 23.08.2019)
  6. Çuhadar, F.G., 2017. Mimarlık Hizmeti Kapsamında Bina Bilgi Modelleme: "G Villa" Konut Projesi. Yüksek Lisans Tezi, İstanbul Kültür Üniversitesi,
  7. İstanbul.
  8. Elmalı, Ö., Bayram, S., 2018. BIM kavramının Türk inşaat sektörüne entegrasyonu üzerine bir alan çalışması, III. Uluslararası Mesleki ve Teknik Bilimler Kongresi, 21-22
  9. Haziran, Gaziantep, cilt 5, 3469-3479.
  10. Eroğlu, E., 2019. Evaluation of the Reliability of BIM-Based Quantity Take-Off Processes in Construction Projects. Master’s thesis, Middle East Technical University, Ankara, Turkey. EUBIM Taskgroup, 2019. Avrupa Kamu Sektörü tarafından Yapı Bilgi Modellemesinin tanıtımı için El Kitabı. http://www.eubim.eu/wp-content/uploads/2019/05/EU_BIM_Task_Group_Handbook_Turkish.pdf (Son erişim Tarihi: 14.09.2019)
  11. Gerçek, B., 2016. BIM Execution Process of Construction Companies for Building Projects. Master’s thesis, İzmir Institute of Technology, İzmir,
  12. Turkey. Gerçek, B., İlal, M.E., Tokdemir, O.B., Günaydın, H.M., 2016. Yapı bilgi modellemesi yardımıyla metraj ve maliyet hesabı, 4. Proje ve Yapım Yönetimi Kongresi, 03-05
  13. Kasım, Eskişehir, 786-796. INTES (Türkiye İnşaat Sanayicileri İşveren Sendikası), 2019. İnşaat Sektörü Raporu, https://intes.org.tr/wp-content/uploads/2019/08/insaat_raporu-a%C4%9Fustos.pdf(Son erişim Tarihi: 06.10.2019)
  14. Issa, R.R.A., Svetlana, O., 2015. Building Information Modeling: Applications and Practices. American Society of Civil Engineers, NY, USA. Karagöz, M.E., 2019. BIM ile yapı yaklaşık maliyeti hesaplama önerisi, Yapı Bilgi Modelleme, 1(1), 39-45.
  15. Karimi, H.A., Akıncı, B., 2009. Current Trends and Future Directions in CAD and GIS Integration. CRC Press, Taylor & Francis Group, London, UK. Kim, K.P., Ma, T., Baryah, A.S., Zhang, C., Hui, K.M., 2016.