SavedAdd your journal

Journals / PressAcademia Procedia / 2018 / Cilt: 7 - Sayı: 1

SINGLE MINUTES EXCHANGE OF DIE (SMED) APPLICATIONS AT THE COLOR CHANGEOVER PROCESS OF PLASTIC BOTTLES

Buse OTUR
İlgi Sila YİLDİRİM
Mustafa Batuhan AYHAN
Pages
233–236
Publication Date
2018-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

By applying SMED, this process is improved by both increasing efficiency and minimizing work in process inventory.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Purpose- This project’s goal is to minimize total time of the color changeover process for plastic bottle’s production at one of the leader companies in cosmetic sector.Methodology- Single Minute Exchange of Die (SMED) approach is used for improving the color changeover process.
📊
Key Findings & Data:Based on this analysis; variants of the colors, detailed steps of the process, time of the steps and cycle time are observed and recorded.Findings- It was obtained that this process lasts from 2 hours to 8 hours depending on colors.
💡
Conclusion & Impact:By applying SMED, this process is improved by both increasing efficiency and minimizing work in process inventory.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Single Minute Exchange of Die method · production of plastic bottles · changeover process

Abstract

Purpose- This project’s goal is to minimize total time of the color changeover process for plastic bottle’s production at one of the leader companies in cosmetic sector.Methodology- Single Minute Exchange of Die (SMED) approach is used for improving the color changeover process. Based on this analysis; variants of the colors, detailed steps of the process, time of the steps and cycle time are observed and recorded.Findings- It was obtained that this process lasts from 2 hours to 8 hours depending on colors. This process is done at least two times in a week and it causes the production line to stop frequently. To use time efficiently and minimize work in process inventory, SMED is required and applied to decrease the time for color change over process. By applying proposed solution suggestions, time can decrease 60% for the color change over process which takes more than 5hours. In addition, by applying other approach, the time can decrease 20.5% for any of the color change over processesConclusion- Color changeover process is analyzed and found out to be inefficient based on the time studies performed. By applying SMED, this process is improved by both increasing efficiency and minimizing work in process inventory.

🔖

Cite This Article

OTUR, B., YİLDİRİM, İ. S., AYHAN, M. B. (2018). SINGLE MINUTES EXCHANGE OF DIE (SMED) APPLICATIONS AT THE COLOR CHANGEOVER PROCESS OF PLASTIC BOTTLES. PressAcademia Procedia, Cilt: 7 - Sayı: 1, 233–236. https://ajindex.com/articles/842293

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Akerlof, G.A. (1970). The market for lemons: quality uncertainty and the market mechanism. Quarterly Journal of Economics, vol. 84, no. 3, p. 488-500.
  2. Alessandri, T., Cerrato, D., Depperu, D. (2014). Organizational slack, experience and acquisition behavior across varying economic environments. Management Decision, vol. 56, no. 5, p. 967-982.
  3. Almomani, M. A., Aladeemy, M., Abdelhadi, A., Mumani, A. (2013). A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques. Computers & Industrial Engineering, Vol. 66(2), 461-469.
  4. Drelich, J., Chibowski, E., Meng, D. D., Terpilowski, K. (2011). Hydrophilic and superhydrophilic surfaces and materials. Soft Matter, Vol.7(21), 9804-9828.
  5. Shingo, S. (1985). A revolution in manufacturing: the SMED system. Productivity Press,
  6. Cambridge, MA. Shingo, S. (1989). A study of the Toyota production system. Productivity Press,
  7. Cambridge, MA.