Journals / PressAcademia Procedia / 2018 / Cilt: 7 - Sayı: 1

AN OVERVIEW FOR QUALITY EVALUATION IN PRODUCTION AND SERVICE SECTORS: AN APPLICATION IN MANUFACTURING SECTOR

ÜRETİM VE HİZMET SEKTÖRÜNDE KALİTE DEĞERLENDİRİLMESİNE GENEL BAKIŞ: ÜRETİM SEKTÖRÜNDE HATA TÜRLERİ VE ETKİ ANALİZ UYGULAMASI

Pages
170–175
Publication Date
2018-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the HTEA, the measure taken for each failure resulting from the analysis and the second Risk analysis for the failure due to the actions of the countermeasures showed that the RPN values of the failure with high-risk value were lowered.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Purpose- Within the scope of the main objective of this study, poka-yoke application and FMEA applications-previous studies in the literature aiming to search a simple yet effective solution that increase effectiveness and efficiency in the companies were mentionedMethodology- FMEA, a more practical, flexible and reliable method for preventing risks at every stage of the service or manufacturing sector, has been used in this study.
📊
Key Findings & Data:It was observed that the (RPN) values of the possible faults detected in the system before the HTEA Analysis process were high.Conclusion- FMEA is a method which reduces the risks of strategic goals and eliminates them from the system, could be used in quality management and literature studies relating this issue were included in the content of this research.
💡
Conclusion & Impact:According to the HTEA, the measure taken for each failure resulting from the analysis and the second Risk analysis for the failure due to the actions of the countermeasures showed that the RPN values of the failure with high-risk value were lowered.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kalite kontrol · hata türleri ve etki analizi · risk öncelik göstergesi

Abstract

Purpose- Within the scope of the main objective of this study, poka-yoke application and FMEA applications-previous studies in the literature aiming to search a simple yet effective solution that increase effectiveness and efficiency in the companies were mentionedMethodology- FMEA, a more practical, flexible and reliable method for preventing risks at every stage of the service or manufacturing sector, has been used in this study. FMEA study-application was implemented-conducted for a door hinge component produced by a refrigerator hardware materials manufacturer.Findings- In the analysis of the study, the steps of FMEA have been tried to be implemented at the stages of production design, service and process. It was observed that the (RPN) values of the possible faults detected in the system before the HTEA Analysis process were high.Conclusion- FMEA is a method which reduces the risks of strategic goals and eliminates them from the system, could be used in quality management and literature studies relating this issue were included in the content of this research. According to the HTEA, the measure taken for each failure resulting from the analysis and the second Risk analysis for the failure due to the actions of the countermeasures showed that the RPN values of the failure with high-risk value were lowered.

Özet

Amaç- Bu çalışmanın temel amacı kapsamında, İşletmeler bünyesinde etkinliği ve verimliliği arttıracak, basit ancak etkili şekilde çözüm bulmayı amaçlayan HTEA uygulamasına değinilmiştir. Bir buzdolabı donanım malzemeleri üretici firma tarafından üretilen kapı menteşe bileşenine yönelik Hata türü ve etkileri analizi çalışması yapıldı.Yöntem- Hizmet ya da üretim sektörlerünün her aşamasında risklerin önlenmesine yönelik daha pratik, esnek ve güvenilir yöntem olan HTEA bu çalışma kapsamında kullanılmıştır. Bu süreç kapsamında yapılmış örnek HTEA çalışmalarında ve bu çalışma kapsamdaki uygulamada bulunarak gözlemlenmiştir.Bulgular- Çalışma sonucunda bir dönemlik iyileşme yüzdesinin teorik olarak %35,23; fiili olarak %33,15 olarak gerçekleştiği görülmüştür. İyileştirme için ayrılacak imkânlar sınırlı olduğu için tüm riskler bir dönem içersinde düşürülmeyebilirSonuç- Tespit edilen hataların değerlerine bağlı olarak Risk Öncelikli Katsayısı (RÖS-RPN) hesaplandı. Bu hesaplanan değerler risk büyüklüğüne göre sıralanıp, RÖS değerinin azaltılmasına yönelik çalışmalarda bulunuldu. HTEA tablosunda getirilen çözüm önerilerine göre hareket edilerek risk oranlarının düştüğü gözlemlendi. Maliyetlerin azaldığı ve kalite düzeyi yükseldi.

🔖

Cite This Article

ERDİL, A., EKERİM, A. (2018). AN OVERVIEW FOR QUALITY EVALUATION IN PRODUCTION AND SERVICE SECTORS: AN APPLICATION IN MANUFACTURING SECTOR. PressAcademia Procedia, Cilt: 7 - Sayı: 1, 170–175. https://ajindex.com/articles/842281

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Abbie, G., Hauser, J. (1993). The voice of the customer. Marketing Science,12(1), 1-27.
  2. Başlıgil, H. (1997-1998). Yayınlanmamış YBS ders notları. Makine Fakültesi, Y.T.Ü., İstanbul, 2004.
  3. Bellomo, P., Rago, C. M., Spencer, C. M., Wilson, Z. J. (2000). Novel approach to increasing the reliability of accelerator magnets. IEEE Transaction on Applied Superconductivity, 10(1), 284 – 287. Besterfield, D. H., Besterfield-Michna, C., Besterfield, G., Besterfield-Sacre, M. (1999). Total quality management. 2nd Edition,
  4. Prentice Hall, New Jersey. Bilgin, M. (1994). Tasarımda kalite ve FMEA metodu. İTÜ Fen Bilimleri Enstitüsü Yüksek Lisans Tezi, İstanbul.
  5. Bolat, T. (2000). Toplam kalite yönetimi (Konaklama İşletmelerinde Uygulanması). Beta Basım Yayım Dağıtım A.Ş., İstanbul, 74. Dizdar, E. N., Kurt, M. (2002).
  6. İş güvenliği. Gazi Üniversitesi, Mühendislik Fakültesi Ders Kitabı, 2002 (111), Kale Ofset, Ankara.
  7. Dizdar, E. N. (2000). İnsan hatasi değerlendirilmesi. Teknoloji Dergisi, 3(4), 149-156.
  8. Düzgüner, E. (2002). Ürün geliştirme sürecinde önleyici kalite güvence: FMEA metodu ve bu metodun bir sanayi işletmesindeki uygulaması, yayınlanmamış yüksek lisans tezi. Kayseri: Erciyes Üniversitesi Sosyal Bilimler Enstitüsü Efil, İ. (2006). Toplam kalite yönetimi. Aktüel yayınları, Şubat 2006.
  9. Eleran, A., Erkan, M., Elitaş, C. (2004). Maliyet muhasebe dersi eğitim sürecinin iyileştirmesinde hata türleri ve etki analizi yönteminin kullanilmasi. Afyon Kocatepe Üniversitesi, İktisadi İdari Bilimler Fakültesi Dergisi, 63-71.
  10. Elliott, J. B. (1998). Risk analysis - two tools you can use to assure product safety and reliability. The Validation Consultant, Booth Scientific Inc. Engin, O., Kaya, İ. (2004). Trafik kazalarinin önlenmesinde hata modu ve etkileri analizi (HMEA) modeli. Polis Bilimleri Dergisi, 6(1-2), Cilt: 6, Sayı: 1-2.
  11. Hough, P. (2000). Failure mode and effect analysis. http://www.wclass.com/fmea1.htm, 10.10.2017.
  12. Kasa, H., Boran, S. (1993). FMEA ve toplam kalite yönetimi için önemi. YA/EM93 Yöneylem Araştırması Endüstri Mühendisliği 15. Ulusal Kongresi "Küreselleşme Ve Türk Endüstrisi" Bildiriler Kitabı, s. 87. Kim, K. O., Yang, Y., Zuo, Ming, J. (2013). A new realibility allocationweight for reducing the occurence of severe failure effects. Realibility Engineering and System Security, 117, 81-88.
  13. Klir, G. J., Yuan, B. (1995). Fuzzy sets and fuzzy logic: theory and application, New Jersey: Prentice-Hall, Springer, Berlin. Milli Prodüktivite Merkezi Yayınları (1998).