Journals / Teknik Dergi / 2020 / Cilt: 31 - Sayı: 5

Optimum Design of Sewer Systems by using Differential Evolution Algorithm

Kanalizasyon Sistemlerinin Diferansiyel Evrim Algoritması Kullanılarak Optimum Tasarımı

Pages
10229–10250
Publication Date
2020-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The performance of the proposed approach is tested on two example systems and the similar or better results are obtained compared to the obtained results given in literature.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a solution approach which is based on the differential evolution (DE) algorithm is developed for optimum design of sewer systems.
📊
Key Findings & Data:In the developed approach, the slope of each pipe is used as the decision variable of the optimization model and the diameters are selected from the available diameters in market for minimizing the total system cost.
💡
Conclusion & Impact:The performance of the proposed approach is tested on two example systems and the similar or better results are obtained compared to the obtained results given in literature.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Kanalizasyon Sistemi · Optimum Tasarım · Optimizasyon

Abstract

In this study, a solution approach which is based on the differential evolution (DE) algorithm is developed for optimum design of sewer systems. In the developed approach, the slope of each pipe is used as the decision variable of the optimization model and the diameters are selected from the available diameters in market for minimizing the total system cost. All the physical and managerial constraints to be satisfied during the optimization process is included to the model by using the penalty function approach. The performance of the proposed approach is tested on two example systems and the similar or better results are obtained compared to the obtained results given in literature.

Özet

Bu çalışmada kanalizasyon sistemlerinin optimum tasarımının yapılabildiği diferansiyel evrim (DE) algoritmasına dayanan bir çözüm yaklaşımı geliştirilmiştir. Geliştirilen yaklaşımda her bir boruya ait eğim değeri optimizasyon modelinde karar değişkeni olarak kullanılmakta ve bu değerler için toplam sistem maliyeti minimize edilecek şekilde belirlenen piyasa çapları içerisinden boru çapları seçilmektedir. Optimizasyon işlemi esnasında sağlanması gereken fiziksel ve yönetimsel kısıtların tümü penaltı fonksiyonu yaklaşımı kullanılarak optimizasyon modeline dahil edilmiştir. Geliştirilen yaklaşımın performansı iki örnek sistem üzerinde test edilmiş ve literatürde verilenlere benzer veya daha iyi sonuçlar elde edilmiştir.

🔖

Cite This Article

TAN, E., SADAK, D., AYVAZ, M. T. (2020). Optimum Design of Sewer Systems by using Differential Evolution Algorithm. Teknik Dergi, Cilt: 31 - Sayı: 5, 10229–10250. https://ajindex.com/articles/83745

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Afshar, M. H., Rebirthing Genetic Algorithm for Storm Sewer Network Design. Scientica Iranica Transactions A: Civil Engineering, 19, 1, 11-19, 2012.
  2. Elimam, A. A., Charalambous, C., Ghobrial, F. H., Optimum Design of Large Sewer Networks. Journal of Environmental Engineering, 115, 6, 1171-1190, 1989.
  3. Swamee, P. K., Sharma, A. K., Optimal Design of A Sewer Line Using Linear Programming. Applied Mathematical Modelling, 37, 4430-4439, 2012.
  4. Price, R. K., Design of Storm Water Sewers for Minimum Construction Cost. Proc. 1st International Conference on Urban Strom Drainage, Southampton, United Kingdom, 636-647, 1978.
  5. Swamee, P. K., Design of Sewer Line. Journal of Environmental Engineering, 127, 9, 776-781, 2001.
  6. Mays, L. W., Wenzel, H. G., Optimal Design of Multilevel Branching Sewer Systems. Water Resources Research, 12, 5, 913-917, 1976.
  7. Robinson, D. K., Labadie, J. W., Optimal Design of Urban Storm Water Drainage System. Int. Symposium on Urban Hydrology, Hydraulics and Sediment Control, University of Kentucky, Lexington, KY, USA, 145-156, 1981.
  8. Yen, B. C., Cheng, S. T., Jun, B. H., Voohees, M. L., Wenzel, H. G., Illinois Least Cost Sewer System Design Model, ILSD-1&2 User's Guide, Dept. of Civil Engineering University of Texas at Austin, USA, 1984.
  9. Kulkarin, V. S., Khanna, P., Pumped Wastewater Collection Systems Optimization. J. of Environmental Engineering, 111, 5, 589-601, 1985.
  10. Li, G., Matthew, R. G. S., New Approach for Optimization of Urban Drainage Systems. Journal of Environmental Engineering, 116, 5, 927-944, 1990.
  11. Yeh, S. F., Chu, C. W., Applying Tabu Search and Simulated Annealing to the Optimal Design of Sewer Networks. Engineering Optimization, 43, 2, 159-174, 2011.
  12. Ayvaz, M. T., A Linked Simulation-Optimization Model for Solving the Unknown Groundwater Pollution Source Identification Problems. Journal of Contaminant Hydrology, 117, 46-59, 2010.
  13. Afshar, M. H., Aplication of A Genetic Algorithm to Storm Sewer Network Optimization. Scientia Iranica, 13, 3, 234-244, 2006.
  14. Haghighi, A., Bakhshipour, A. E., Optimization of Sewer Networks Using an Adaptive Genetic Algorithm. Water Resour Manage, 26, 3441-3456, 2012.
  15. Afshar, M. H., Afshar, A., Marino, M. A., Darbandi A. A. S., Hydrograph-Based Storm Sewer Design Optimization by Genetic Algorithm. Can. J. Civ. Eng., 33, 3, 319-325, 2006.
  16. Afshar, M. H., Sotoodeh, M. H., Optimal Design of the Sewer Networks with the Genetic Algorithm. J. Eng. Sci. Iran Univ. Sci. Technol, 2, 19, 37-48, 2008.
  17. Çetin, T.,