Journals / Journal of Aviation / 2020 / Cilt: 4 - Sayı: 2

Fundamental Frequency Optimization of Doubly Curved Aerospace Structural Panels via Variable Stiffness Concept

Değişken Sertlik Konsepti ile Havacılık ve Uzay Çift Eğimli Panel Yapılarının Temel Frekans Optimizasyonu

Pages
36–47
Publication Date
2020-12-28
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Numerical results demonstrate the effectiveness fiber angle path and boundary conditions on the natural frequencies of the composite panel.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the present study, the fundamental natural frequencies of curvilinear fiber composite doubly curved panel are optimized.
📊
Key Findings & Data:Von-Karman kinematic strain relations are used and the first order shear deformation theory (FSDT) is employed to generalize the formulation for the moderately thick doubly curved panel including transverse shear effects.
💡
Conclusion & Impact:Numerical results demonstrate the effectiveness fiber angle path and boundary conditions on the natural frequencies of the composite panel.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Çift eğimli panel · Eğrisel lif yolu · Optimizasyon

Abstract

In the present study, the fundamental natural frequencies of curvilinear fiber composite doubly curved panel are optimized. Doubly curved panels are used in various components of the structural frames of the aerospace vehicles. The variable stiffness behavior is obtained by altering the fiber angles continuously according to curvilinear fiber path function in the composite laminates. Structural model is utilized based on the virtual work principle. The aim is to achieve the best fiber paths with maximized fundamental frequencies or in-plane strengths for a composite panels. An eight-layer composite doubly curved panel with two types of boundary conditions are considered as a case study in this research. The boundary conditions include; CCCC, FCFC where C stands for clamped, and F for free edges. Von-Karman kinematic strain relations are used and the first order shear deformation theory (FSDT) is employed to generalize the formulation for the moderately thick doubly curved panel including transverse shear effects. Generalized Differential Quadrature (GDQ) method of solution is employed to solve the governing equations of motion. Numerical results demonstrate the effectiveness fiber angle path and boundary conditions on the natural frequencies of the composite panel. The optimal fiber angle paths of each layer are presented for the above cases in free vibration analysis.

Özet

Bu çalışmada, eğrisel fiber kompozit çift eğimli panelin temel doğal frekansları optimize edilmiştir. Hava-uzay araçlarının yapısal çerçevelerinin çeşitli bileşenlerinde çift kıvrımlı paneller kullanılmaktadır. Değişken sertlik davranışı, kompozit laminatlarda eğrisel fiber yol fonksiyonuna göre fiber açılarının sürekli olarak değiştirilmesiyle elde edilir. Yapısal model sanal çalışma prensibine dayalı olarak kullanılmaktadır. Amaç, kompozit paneller için maksimize edilmiş temel frekanslar veya düzlem içi güçler ile en iyi fiber yollarını elde etmektir. Bu araştırmada, iki tür sınır koşuluna sahip sekiz katmanlı bir kompozit çift eğimli panel bir vaka çalışması olarak kabul edilir. Sınır koşulları şunları içerir; CCCC, FCFC burada C kelepçeli anlamına gelir ve F serbest kenarlar için. Von-Karman kinematik gerinim ilişkileri kullanılır ve enine kesme etkileri dahil orta derecede kalın çift eğimli panel için formülasyonu genelleştirmek için birinci dereceden kesme deformasyon teorisi (FSDT) kullanılır. Genelleştirilmiş Diferansiyel Quadrature (GDQ) çözüm yöntemi, hareketin yönetim denklemlerini çözmek için kullanılır. Sayısal sonuçlar, kompozit panelin doğal frekansları üzerindeki fiber açı yolu ve sınır koşullarının etkinliğini gösterir. Her katmanın optimum fiber açısı yolları, yukarıdaki durumlar için serbest titreşim analizinde sunulmuştur.

🔖

Cite This Article

FARSADİ, T., KURTARAN, H. (2020). Fundamental Frequency Optimization of Doubly Curved Aerospace Structural Panels via Variable Stiffness Concept. Journal of Aviation, Cilt: 4 - Sayı: 2, 36–47. https://ajindex.com/articles/834849

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Abdalla, M. M., Setoodeh, S., & Gürdal, Z. (2007). Design of variable stiffness composite panels for maximum fundamental frequency using lamination parameters. Composite structures, 81(2), 283-291
  2. Labans, E., & Bisagni, C. (2019). Buckling and free vibration study of variable and constant-stiffness cylindrical shells. Composite Structures, 210, 446-457
  3. Narita, Y., & Robinson, P. (2006). Maximizing the fundamental frequency of laminated cylindrical panels using layerwise optimization. International Journal of Mechanical Sciences, 48(12), 1516-1524
  4. Serhat, G., & Basdogan, I. (2019). Lamination parameter interpolation method for design of manufacturable variable-stiffness composite panels. AIAA Journal, 3052-3065
  5. Blom AW. Structural performance of fiber-placed, variable-stiffness composite conical and cylindrical shells. PhD Thesis, Faculty of Aerospace Engineering, Delft University of Technology, Delft, The Netherlands, 2010
  6. Blom, A. W., Stickler, P. B., & Gürdal, Z. (2010). Optimization of a composite cylinder under bending by tailoring stiffness properties in circumferential direction. Composites Part B: Engineering, 41(2), 157-165
  7. Blom, A. W., Setoodeh, S., Hol, J. M., & Gürdal, Z. (2008). Design of variable-stiffness conical shells for maximum fundamental eigenfrequency. Computers & structures, 86(9), 870-878
  8. Honda, S., Igarashi, T., & Narita, Y. (2013). Multi-objective optimization of curvilinear fiber shapes for laminated composite plates by using NSGA-II. Composites Part B: Engineering, 45(1), 1071-1078
  9. Tornabene, F., Fantuzzi, N., Bacciocchi, M., & Viola, E. (2015). Higher-order theories for the free vibrations of doubly-curved laminated panels with curvilinear reinforcing fibers by means of a local version of the GDQ method. Composites Part B: Engineering, 81, 196-230
  10. Zhao, W., & Kapania, R. K. (2019). Prestressed vibration of stiffened variable-angle tow laminated plates. AIAA Journal, 57(6), 2575-2593
  11. Wu, C. P., & Lee, C. Y. (2001). Differential quadrature solution for the free vibration analysis of laminated conical shells with variable stiffness. International Journal of Mechanical Sciences, 43(8), 1853-1869
  12. Luersen, M. A., Steeves, C. A., & Nair, P. B. (2015). Curved fiber paths optimization of a composite cylindrical shell via Kriging-based approach. Journal of Composite Materials, 49(29), 3583-3597
  13. Hao, P., Yuan, X., Liu, C., Wang, B., Liu, H., Li, G., & Niu, F. (2018). An in