Journals / Uluslararası Doğu Anadolu Fen Mühendislik ve Tasarım Dergisi / 2019 / Cilt: 1 - Sayı: 2

A Research on Zoning Diameters which is the Basic Point for Construction Permits

İnşaat Yapım İzni İçin Temel Nokta Olan İmar Çapları Üzerine Bir Araştırma

Pages
142–153
Publication Date
2019-12-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In our study, by producing the samples in Netcad program, necessary documentation about zoning diameter was created.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:One of the biggest sector in Turkey is the construction industry.
📊
Key Findings & Data:The important point in the sector is to get permission from the institution to which it belongs, regardless of the type of structure.
💡
Conclusion & Impact:In our study, by producing the samples in Netcad program, necessary documentation about zoning diameter was created.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:İnşaat · İmar çapı · Netcad

Abstract

One of the biggest sector in Turkey is the construction industry. The important point in the sector is to get permission from the institution to which it belongs, regardless of the type of structure. Within the boundaries of municipal zoning or adjacent areas or within the boundaries of the special provincial administration, the first stage is to take the zoning diameters for the construction of residential, commercial, industrial, governmental, health and religious facility areas. Zoning diameters are the first stage for obtaining license and settlement reports. Zoning diameters, discrete, block, adjoining plan type of planned or unplanned type zoning regulations of the relevant institution and within the framework of the plan notes, the drawing distance on the ground is to show. The purpose of these zoning processes, which are available in various versions, is to provide comments on proper urbanism. Netcad, Autacad, Ansys, Microstation and so on. can be done in all package programs. In our study, by producing the samples in Netcad program, necessary documentation about zoning diameter was created.

Özet

Türkiye’de en büyük sektörlerden birisi de inşaat sektörüdür. Sektör içerisinde, önemli nokta, hangi türden yapı yapılırsa yapılsın, bağlı bulunduğu kurumdan izin alınmasıdır. Belediye imar veya mücavir alan sınırları içerisinde ya da özel il idaresi sınırları içerisinde, konut, ticaret, sanayi, resmi kurum,, sağlık, dini tesis alanlarının yapımım için, ilk aşama imar çaplarının alınmasıdır. İmar çapları, ruhsat ve iskan raporlarının alınması için ilk aşamadır. İmar çapları, ayrık, blok, bitişik plan tipinde ilgili planlı tip ya da plansız tip imar yönetmeliği ve ilgili kurumun plan notları çerçevesinde, zemin üzerinde çekme mesafelerinin gösterilmesidir. Çeşitli versiyonları olan bu imar çapı işlemlerinin, amacı düzgün şehirciliğe yorum getirmektir. Netcad, Autacad, Ansys, Microstation vb. tüm paket programlarda yapılabilir. Çalışmamızda örnekleri, Netcad programında üreterek, imar çapı hakkında gerekli dökümantasyon oluşturuldu.

🔖

Cite This Article

TAŞKAYA, S. (2019). A Research on Zoning Diameters which is the Basic Point for Construction Permits. Uluslararası Doğu Anadolu Fen Mühendislik ve Tasarım Dergisi, Cilt: 1 - Sayı: 2, 142–153. https://ajindex.com/articles/815832

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. İmar Kanunu, (2019).
  2. Resmi Gazete, Cilt:24. Sayfa:1-378.
  3. Taşkaya, S., (2019). Yerel Yönetimlerde İmar ve Şehircilik Faaliyetleri Üzerine Bir Araştırma, 2014-2019
  4. Yılları Arası Belediyecilik, Elazığ İli Örneği. Uluslararası Doğu Anadolu Fen Mühendislik ve Tasarım Dergisi, 1(1), 14-28. URL-1, (2019). Elazığ Belediyesi, https://www.elazig.bel.tr/meclis-gundem-kararlari-ebelediye-138, (Erişim Tarihi: 12 Ağustos 2019).