Journals / Türkiye Ormancılık Dergisi / 2021 / Cilt: 22 - Sayı: 3

Esterification of cellulose isolated from black poplar (Populus nigra L.) sawdust with octanoyl chloride

Karakavak (Populus nigra L.) talaşından izole edilen selülozun oktanoil klorür ile esterlenmesi

Pages
306–310
Publication Date
2021-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The findings of the study showed that the produced cellulose derivatives might be appropriate for the production of biodegradable and environmentally degradable plastics, resins, films, and coatings for use in some industrial areas such as in the food and pharmaceutical industries.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, cellulose was isolated from black poplar (Populus nigra L.) sawdust, which is produced by forest industrial processes in large amounts as lignocellulosic waste.
📊
Key Findings & Data:Isolated cellulose was then esterified with different concentrations of octanoyl chloride (36–162 mmol, 2–9 equivalent per anhydroglucose unit in cellulose), and the obtained derivatives were characterized in terms of elemental analysis, percent yield, degree of substitution (DS), and solubility.
💡
Conclusion & Impact:The findings of the study showed that the produced cellulose derivatives might be appropriate for the production of biodegradable and environmentally degradable plastics, resins, films, and coatings for use in some industrial areas such as in the food and pharmaceutical industries.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Selüloz · Esterlenme · Elementel analiz

Abstract

In this study, cellulose was isolated from black poplar (Populus nigra L.) sawdust, which is produced by forest industrial processes in large amounts as lignocellulosic waste. Isolated cellulose was then esterified with different concentrations of octanoyl chloride (36–162 mmol, 2–9 equivalent per anhydroglucose unit in cellulose), and the obtained derivatives were characterized in terms of elemental analysis, percent yield, degree of substitution (DS), and solubility. DS values of cellulose derivatives ranged from 1.13 to 2.71, while percent yields varied between 56.36% and 93.23%. Solubility analysis revealed that esterification improved the hydrophobic capacity of cellulose. The findings of the study showed that the produced cellulose derivatives might be appropriate for the production of biodegradable and environmentally degradable plastics, resins, films, and coatings for use in some industrial areas such as in the food and pharmaceutical industries.

Özet

Bu çalışmada, orman endüstrisi proseslerinde büyük miktarlarda lignoselülozik atık olarak ortaya çıkan karakavak (Populus nigra L.) talaşından selüloz izole edilmiştir. İzole edilen selüloz daha sonra farklı konsantrasyonlardaki oktanoil klorür (36-162 mmol, selülozdaki anhidroglukoz birimi başına 2-9 ekivalent) ile esterlenmiş ve elde edilen türevler elementel analiz, yüzde verim, sübstitüsyon derecesi (DS) ve çözünürlük ile karakterize edilmiştir. Selüloz türevlerinin DS değerleri 1.13 ile 2.71 arasında değişirken, verim yüzdelerinin %56.36 ile %93.23 arasında olduğu görülmüştür. Çözünürlük analizi sonucu, esterleme ile selülozun hidrofobik kapasitesinde gelişme olduğu görülmüştür. Çalışma sonuçları, elde edilen selüloz türevlerinin, gıda ve ilaç endüstrileri gibi bazı alanlarda kullanılabilecek biyolojik olarak parçalanabilir ve çevreye karışabilir plastik, reçine, film ve kaplamaların üretimi için uygun olabileceğini göstermiştir.

🔖

Cite This Article

YAŞAR, S. (2021). Esterification of cellulose isolated from black poplar (Populus nigra L.) sawdust with octanoyl chloride. Türkiye Ormancılık Dergisi, Cilt: 22 - Sayı: 3, 306–310. https://ajindex.com/articles/812642

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Antova, G., Vasvasova, P., Zlatanov, M., 2004. Studies upon the synthesis of cellulose stearate under microwave heating. Carbohydr. Polym., 57: 131–134.
  2. Arikan, E.B., Bilgen, H.D., 2019. Production of bioplastic from potato peel waste and investigation of its biodegradability. International Advanced Researches and Engineering Journal, 3(2): 93-97.
  3. Civitarese, V., Acampora, A., Sperandio, G., Assirelli, A., Picchio, R., 2019. Production of wood pellets from poplar trees managed as coppices with Different harvesting cycles. Energies, 12(15): 2973. Crepy, L., Chaveriat, L., Banoub, J., Martin, P., Joly, N., 2009. Synthesis of cellulose fatty esters as plastics-influence of the degree of substitution and the fatty chain length on mechanical properties. ChemSusChem, 2(2): 165–170.
  4. Fengel, D., Wegener, G., 1984.
  5. Wood-Chemistry, Ultrastructure, Reaction, Walter de Gruyter, Berlin. Gaudet, M., Jorge, V., Paolucci, I., Beritognolo, I., Scarascia Mugnozza, G., Sabatti, M., 2008. Genetic linkage maps of Populus nigra L. including AFLPs, SSRs, SNPs, and sex trait. Tree Genetics and Genomes, 4:25–36.
  6. Heredia-Guerrero, J.A., Goldoni, L., Benítez, J.J., Davis, A., Ceseracciu, L., Cingolani, R., Bayer, I.S., Heinze, T., Koschella, A., Heredia, A., Athanassiou, A., 2017. Cellulose-polyhydroxylated fatty acid ester-based bioplastics with tuning properties: Acylation via a mixed anhydride system. Carbohydrate Polymers, 173: 312–320.
  7. Joly, N., Granet, R., Krausz, P., 2003. Crosslinking of cellulose by olefin metathesis. Journal of Carbohydrate Chemistry, 22: 47–55.
  8. Joly, N., Granet, R., Branland, P., Verneuil, B., Krausz, P., 2005. New methods for acylation of pure and sawdust-extracted cellulose by fatty acid derivatives—Thermal and mechanical analyses of cellulose-based plastic films. Journal of Applied Polymer Science, 97(3): 1266–1278.
  9. Joly, N., Martin, P., Lienard, L., Rutot, D., Stassin, F., Granet, R., Krausz, J.P., Cavrot, J-P., 2006. Effect of degree of substitution on the mechanical and thermomechanical properties of lauroyl cellulose ester films. e-Polymers, 70: 1–9.
  10. Kahraman, T., Kahraman, F. K., Karakaya, S., Karahan, A., Ünsal, G., Karatay, H., Toplu, F., 2011. Türkiye’de Karakavakta (Populus nigra L.) ıslah çalışmaları ‘Fidanlık aşaması sonuçları’. T.C. Orman ve Su İşleri Bakanlığı Kavak ve Hızlı Gelişen Orman Ağaçları Araştırma Enstitüsü Müdürlüğü, Teknik Bülten No: 210, İzmit, Türkiye. Krassig H.A., 1993. Cellulose: Structure Accessibility and Reactivity. Pol