Journals / Türkiye Ormancılık Dergisi / 2021 / Cilt: 22 - Sayı: 3

Development of stem diameter model using quantile regression

Kantil regresyon ile gövde çapı modelinin geliştirilmesi

Pages
250–256
Publication Date
2021-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In conclusion, QR technique is an approach that can be used as an alternative to other regression techniques for stem diameter estimations.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Tree volume estimates are one of the most important components of growth and yield models.
📊
Key Findings & Data:In this study, a stem diameter model based on Max and Burkhart (1976) model was developed using ONLS and QR methods for natural black pine stands.
💡
Conclusion & Impact:In conclusion, QR technique is an approach that can be used as an alternative to other regression techniques for stem diameter estimations.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Kantil regresyon · Kantil seti · Gövde çapı

Abstract

Tree volume estimates are one of the most important components of growth and yield models. Stem diameter models are one of the most modern approaches used for stem volume estimation. Different regression methods, especially the nonlinear least squares (ONLS) method, were used to develop stem diameter models. Recently, the quantile regression (QR) method has also been used in forestry applications for the development of taper models. In this study, a stem diameter model based on Max and Burkhart (1976) model was developed using ONLS and QR methods for natural black pine stands. For this purpose, sample tree data were obtained from two different black pine stands, and some of the data (group I) were used to develop the models and the rest of the data (group II) was used to test the models developed. In the study, the QR technique was used based on two different quantile sets (3QR and 5QR). The results were compared for the whole tree stem and ten different relative height classes using four different evaluation criteria. Evaluation statistics showed that both quantile regression models provided better results as compared to ONLS and 3QR model performed relatively better than 5QR. In conclusion, QR technique is an approach that can be used as an alternative to other regression techniques for stem diameter estimations.

Özet

Büyüme ve hasılat modellerinin en önemli bileşenlerinden birisi ağaç hacim tahminleridir. Hacim tahminleri amacıyla kullanılan en modern yaklaşımlardan birisi de gövde çapı modelleridir. Günümüze kadar farklı formlarda pek çok gövde çapı modeli geliştirilmiştir. Gövde çapı modellerinin geliştirilmesi amacıyla geleneksel doğrusal olmayan en küçük kareler (ONLS) yöntemi başta olmak üzere farklı regresyon teknikleri kullanılmıştır. Son yıllarda, ormancılık uygulamalarında ve gövde çapı modellerinin geliştirilmesi amacıyla Kantil Regresyon (QR) tekniği de kullanılmaya başlamıştır. Bu çalışmada, doğal karaçam meşcereleri için ONLS ve QR teknikleriyle Max ve Burkhart (1976) modelini temel alan gövde çapı modeli geliştirilmiştir. Bu amaçla, birbirinden bağımsız iki farklı karaçam meşceresinden örnek ağaç verileri elde edilmiş ve verilerin bir kısmı (grup I) model geliştirmek, diğer kısmı ise (grup II) ise geliştirilen modelin test edilmesi amacıyla kullanılmıştır. Çalışmada, QR tekniği iki farklı kantil setini (3QR ve 5QR) esas alarak kullanılmıştır. Sonuçlar, dört farklı değerlendirme ölçütü kullanılarak tüm ağaç gövdesi ve on farklı nisbi boy sınıfı için karşılaştırılmıştır. QR tekniği ile elde edilen gövde çapı tahminlerinin hem tüm gövde hem de farklı nispi boy sınıfları için ONLS ile elde edilen sonuçlara göre daha başarılı olduğu görülmüştür. Çap tahminleri için 3QR ile elde edilen sonuçlar, 5QR ile elde edilen sonuçlara göre nispeten daha başarılıdır. Sonuç olarak, QR tekniği de, gövde çapı tahminleri için diğer regresyon tekniklerine alternatif olarak kullanılabilecek bir yaklaşımdır.

🔖

Cite This Article

OZÇELİK, R., ALKAN, O., KALKANLI, Ş. (2021). Development of stem diameter model using quantile regression. Türkiye Ormancılık Dergisi, Cilt: 22 - Sayı: 3, 250–256. https://ajindex.com/articles/812636

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Alkan, O., Özçelik, R., Alkan, H., 2019. Türkiye’nin bazı önemli ağaç türleri için yöresel gövde çapı modellerinin geliştirilmesi: Bucak örneği. Turkish Journal of Forestry, 20(4): 333-340.
  2. Biging, G.S., 1984. Taper equations for second-growth mixed conifers of Northern California. Forest Science, 30(4): 1103-1117.
  3. Bohora, S.B., Cao, Q.V., 2014. Prediction of tree diameter growth using quantile regression and mixed-effects models. Forest Ecology and Management, 319: 62–66.
  4. Cao, Q.V., Burkhart, H.E., Max, T.A., 1980. Evaluation of two methods for cubic-volume prediction of loblolly pine to any merchantable limit. Forest Science, 26(1): 71-80.
  5. Cao, Q.V., Wang, J., 2015. Evaluation of methods for calibrating a tree taper equation. Forest Science, 61(2): 213–219.
  6. Castedo-Dorado, F., Gómez-García, E., Diéguez-Aranda, U., Barrio-Anta, M., Crecente-Campo, F., 2012. Aboveground stand-level biomass estimation: a comparison of two methods for major forest species in northwest Spain. Annals of Forest Science, 69(6): 735-746.
  7. Chen, C., Wei, Y., 2005. Computational issues for quantile regression. Sankhyā: The Indian Journal of Statistics, 67(2): 399-417.
  8. Clark, A., Souter, R.A., Schlaegel, B.E., 1991. Stem profile equations for southern tree species. Research paper SE (USA). Coble, D.W., Hilpp, K., 2006. Compatible cubic-foot stem volume and upper-stem diameter equations for semi-intensive plantation grown loblolly pine trees in East Texas. Southern Journal of Applied Forestry, 30(3): 132-141.
  9. Crecente-Campo, F., Alboreca, A.R., Diéguez-Aranda, U., 2009. A merchantable volume system for Pinus sylvestris L. in the major mountain ranges of Spain. Annals of forest science, 66(8): 808. de-Miguel, S., Mehtätalo, L., Shater, Z., Kraid, B., Pukkala, T., 2012. Evaluating marginal and conditional predictions of taper models in the absence of calibration data. Canadian Journal of Forest Research, 42(7): 1383-1394. Diéguez-Aranda, U., Castedo-Dorado, F., Álvarez-González, J.G., Rojo, A., 2006. Compatible taper function for Scots pine plantations in northwestern Spain. Canadian Journal of Forest Research, 36(5): 1190-1205.
  10. Ducey, M.J., Knapp, R.A., 2010. A stand density index for complex mixed species forests in the northeastern United States. Forest Ecology and Management, 260(9): 1613-1622.
  11. Evans, A.M., Finkral, A.J., 2010. A new look at spread rates of exotic diseases in North American forests. Forest Science, 56: 453–459.
  12. Evans, A.M., Gregoire, T.G., 2007. A geographically var