SavedAdd your journal

Journals / Sciennovation / 2022 / Cilt: 4 - Sayı: 1

Comparative Analysis of Segregated and Non-segregated Column-Beam Connection Region

Segregasyonlu Ve Segregasyonsuz Kolon Kiriş Bağlantı Bölgesinin Karşılaştırmalı Analizi

Mehmet Emin ÖZDEMİR
Sevil AY
Murat YAYLACI
Pages
6–17
Publication Date
2022-09-28
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the study, it has been shown that the calculated stress, strain and deformation values in the segregated column-beam connection region are greater than in the non-segregated connection region.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the structural behavior of segregated and non-segregated column-beam connection regions was investigated using the finite element method.
📊
Key Findings & Data:In order to simulate the segregated situation, the concrete section was narrowed and the reinforcements were removed outside the concrete section.
💡
Conclusion & Impact:As a result of the study, it has been shown that the calculated stress, strain and deformation values in the segregated column-beam connection region are greater than in the non-segregated connection region.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Sonlu elemanlar metodu · Segregasyon · Gerilme analizi

Abstract

In this study, the structural behavior of segregated and non-segregated column-beam connection regions was investigated using the finite element method. In order to simulate the segregated situation, the concrete section was narrowed and the reinforcements were removed outside the concrete section. Analyzes were carried out with the ANSYS Workbench package program, which allows the behavior of structural elements to be examined under dynamic and static loads using the Finite Element Method (FEM). Firstly, the column-beam connection region was designed in three dimensions with the sizes and reinforcement diameters used in the application. Secondly, the design was transferred to the ANSYS program and the mesh structure was created. Finally, structural loads were added to the system and finite element analysis was performed. In the analyzes, the equivalent (von-Mises) stress, strain and deformation values of the system were examined and the obtained results were compared. Obtained results are presented as figures and tables. As a result of the study, it has been shown that the calculated stress, strain and deformation values in the segregated column-beam connection region are greater than in the non-segregated connection region.

Özet

Bu çalışmada, segregasyon meydana gelmiş ve segregasyonsuz kolon kiriş bağlantı bölgelerinin davranışları sonlu elemanlar yöntemi ile incelenmiştir. Segregasyonlu durumu simüle edebilmek adına beton kesiti daraltılmış ve donatılar beton kesitinin dışına çıkartılmıştır. Analizler, Sonlu Elemanlar Metodu (SEM) kullanarak yapı elemanlarının dinamik ve statik yükler altındaki davranışlarının incelenmesine olanak sağlayan ANSYS Workbench paket programı ile gerçekleştirilmiştir. İlk olarak kolon kiriş bağlantı bölgesi uygulamada kullanılan ölçüler ve donatı çapları ile üç boyutlu olarak tasarlanmıştır. İkinci olarak tasarım ANSYS programına aktarılmış ve ağ yapısı (mesh) oluşturulmuştur. Son olarak yapısal yükler sisteme eklenmiş ve sonlu elemanlar analizi yapılmıştır. Yapılan analizlerde sistemin eşdeğer (von-Mises) gerilme, şekil değiştirme ve deformasyon değerleri incelenmiş ve elde edilen sonuçlar karşılaştırılmıştır. Elde edilen sonuçlar resimler ve tablolar halinde sunulmuştur. Çalışmanın sonucunda segregasyon meydana gelmiş kolon kiriş bağlantı bölgesinde hesaplanan gerilme, şekil değiştirme ve deformasyon değerlerinin segregasyonsuz bağlantı bölgesine kıyasla daha büyük olduğu gösterilmiştir.

🔖

Cite This Article

ÖZDEMİR, M. E., AY, S., YAYLACI, M. (2022). Comparative Analysis of Segregated and Non-segregated Column-Beam Connection Region. Sciennovation, Cilt: 4 - Sayı: 1, 6–17. https://ajindex.com/articles/799190

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Bui, V. K., Montgomery, D., Hinczak, I., & Turner, K. (2002). Rapid testing method for segregation resistance of self-compacting concrete. Cement and Concrete Research, 32(9), 1489–1496. https://doi.org/10.1016/S0008-8846(02)00811-6
  2. Damayanthi, W., Novitasari, Y., & Pratama, M. M. A. (2019). Effects of segregation on reinforced concrete column, a numerical approach. IOP Conference Series: Materials Science and Engineering, 669(1), 012061. https://doi.org/10.1088/1757-899X/669/1/012061
  3. Hidayat, A., Purwanto, Puspowardojo, J., Aziz, F.A., (2015). The influence of graded concrete strength on concrete element. Procedia Engineering. 125, 1023-1029. https://doi.org/10.1016/j.proeng.2015.11.157
  4. Miguel Solak, A., José Tenza-Abril, A., & Eugenia García-Vera, V. (2022). Adopting an image analysis method to study the influence of segregation on the compressive strength of lightweight aggregate concretes. Construction and Building Materials, 323, 126594. https://doi.org/10.1016/J.CONBUILDMAT.2022.126594
  5. Muslim, F., Wong, H. S., Cheng, G., Alexandrou, C., Liu, B., & Buenfeld, N. R. (2020). Combined effects of vertical spacers and segregation on mass transport properties of reinforced concrete. Materials and Structures/Materiaux et Constructions, 53(6), 1–17. https://doi.org/10.1617/S11527-020-01591-9/FIGURES/11
  6. Navarrete, I., & Lopez, M. (2016). Estimating the segregation of concrete based on mixture design and vibratory energy. Construction and Building Materials, 122, 384–390. https://doi.org/10.1016/J.CONBUILDMAT.2016.06.066
  7. Navarrete, I., & Lopez, M. (2017). Understanding the relationship between the segregation of concrete and coarse aggregate density and size. Construction and Building Materials, 149, 741–748. https://doi.org/10.1016/J.CONBUILDMAT.2017.05.185
  8. Nişanci, G.N., Güvercin, Y, Ateş S.M., Ölmez, H., Uzun Yaylacı E., Yaylacı, M., 2020. Investigation of the effect of different prosthesis designs and numbers on stress, strain and deformation distribution. Int. J. of Eng. and Appl. Sci. 12(4), 138-152. https://doi.org/10.24107/ijeas.816227.
  9. Oner, E., Şengül Şabano, B., Uzun Yaylacı, E., Adıyaman, G., Yaylacı, M., Birinci, A., 2022. On the plane receding contact between two functionally graded layers using computational, finite element and artificial neural network methods. J. of Appl. Math. and Mech. https://doi.org/10.1002/zamm.202100287.
  10. Shen, L., Struble, L., & Lange, D. (2009). Modeling Dynamic Segregation of Self-Consolidating Concrete. Materials Journa