Journals / Researcher / 2021 / Cilt: 01 - Sayı: 01

Optimization of Effective Parameters in Shrinkage Problems of Part Produced with Plastic Injection Molding Technique Using Taguchi Method

Taguchi Metodu Kullanılarak Plastik Enjeksiyon Kalıplama Tekniğiyle Üretilen Parçadaki Çekme Probleminde Etkili Parametrelerin Optimizasyonu

Journal
Researcher
Pages
48–56
Publication Date
2021-07-17
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The validity of the obtained result was confirmed by performing a verification experiment.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the button inner core part produced by plastic injection molding technique is discussed.
📊
Key Findings & Data:In order to minimize the shrinkage amount, a total of 7 factors, including 1 factor with 6 levels and 6 factors with 3 levels, were determined and Taguchi method was used to determine their appropriate factor levels.
💡
Conclusion & Impact:The validity of the obtained result was confirmed by performing a verification experiment.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Deney tasarımı · taguchi metodu · plastik enjeksiyon.

Abstract

In this study, the button inner core part produced by plastic injection molding technique is discussed. Shrinkage (dimensional shrinkage) occurs in the examined part after a certain period from the production stage; thus, problems arise in the assembly of the part. In order to minimize the shrinkage amount, a total of 7 factors, including 1 factor with 6 levels and 6 factors with 3 levels, were determined and Taguchi method was used to determine their appropriate factor levels. Experiments were designed and applied using L18, which is one of the Taguchi orthogonal arrays. The results of these experiments were analyzed and the appropriate levels of the factors were determined. The validity of the obtained result was confirmed by performing a verification experiment.

Özet

Bu çalışmada plastik enjeksiyon kalıplama tekniği ile üretilen düğme iç göbek parçası ele alınmıştır. İncelenen parçada üretim aşamasından belirli bir süre geçtikten sonra çekme (boyutsal küçülmeler) meydana gelmekte ve bu nedenle parça montajında sorunlar çıkmaktadır. Çekme miktarının minimizasyonu için bu soruna neden olabilecek 6 seviyeli 1 faktör ve 3 seviyeli 6 faktör olmak üzere toplamda 7 faktör tespit edilmiş ve bu faktörlerin uygun seviyelerinin belirlenmesi amacıyla Taguchi yönteminden yararlanılmıştır. Taguchi ortogonal dizilerinden L18 kullanılarak deneyler tasarlanmış ve uygulanmış, deney sonuçları analiz edilerek faktörlerin uygun seviyeleri belirlenmiştir. Elde edilen sonucun geçerliliği doğrulama deneyi yapılarak kesinleştirilmiştir.

🔖

Cite This Article

ÖNAL, Ş. (2021). Optimization of Effective Parameters in Shrinkage Problems of Part Produced with Plastic Injection Molding Technique Using Taguchi Method. Researcher, Cilt: 01 - Sayı: 01, 48–56. https://ajindex.com/articles/797319

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Yıldırım, S. (2011). Ürün Tasarımı Geliştirilmesi: Taguchi Tasarımı. Yüksek Lisans Tezi, Başkent Üniversitesi Fen Bilimleri Enstitüsü, Endüstri Mühendisliği Anabilim Dalı, Ankara
  2. Kaya, i., Oktay, S., Engin, O. (2005). Kalite Kontrol Problemlerinin Çözümünde Yapay Sinir Ağlarının Kullanımı. Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 21 (1-2),92-107
  3. Mercan, Ş. (2019). Deney Tasarımı ve Yapay Zekâ Tekniklerinden Yararlanarak Ürün Kalitesinin İyileştirilmesi. Yüksek Lisans Tezi, Balıkesir Üniversitesi Fen Bilimleri Enstitüsü, Endüstri Mühendisliği Anabilim Dalı, Balıkesir
  4. Mehat, N. M., Kassim, S. M., Kamaruddin, S. (2017, October). Investigation On The Effects Of Processing Parameters On Shrinkage Behaviour And Tensile Properties Of İnjection Moulded Plastic Gear Via The Taguchi Method. In Journal of Physics: Conference Series 908 (1),12-49
  5. Aytekin, F. G., (2014). Fotolitografi İşleminde UV Sertleştirme Parametrelerinin Deney Tasarımı İle Eniyilenmesi. Yüksek Lisans Tezi, Kocaeli Üniversitesi Fen Bilimleri Enstitüsü, Endüstri Mühendisliği Anabilim Dalı, Kocaeli
  6. Taylan, D. (2009). Taguchi Deney Tasarımı Uygulaması. Yüksek Lisans Tezi, Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü, Endüstri Mühendisliği Anabilim Dalı, Isparta
  7. Gencel, İ. (2007). Çok Yanıtlı Problemlerin Optimizasyonunda Taguchi Yönteminin Kullanılması Ve Alkollü İçkiler Sektöründe Bir Uygulama. Yüksek Lisans Tezi, Kocaeli Üniversitesi Fen Bilimleri Enstitüsü, Endüstri Mühendisliği Anabilim Dalı, Kocaeli
  8. Aytaç, A., İlivan, M., Öztürk, U. (2016). Taguchi Ve Klasik Deneysel Tasarım Yöntemlerinin Karşılaştırılması: İnce Film Kaplamaların Aşınma Davranışı. Electronic Journal of Vocational Colleges, 6(4), 87-96
  9. Khavekar, R., Modi, B. (2017). A Comparative Analysis of Taguchi Methodology and Shainin System DOE in the Optimization of Injection Molding Process Parameters. In IOP Conference Series: Materials Science and Engineering 225(1), 012183
  10. Tortum, A., Yayla, N., Çelik, C., & Gökdağ, M. (2007). The İnvestigation Of Model Selection Criteria İn Artificial Neural Networks By The Taguchi Method. Physica A: Statistical Mechanics and its Applications, 386(1), 446-468
  11. Amran, M. M., Idayu, N., Faizal, K. M., Sanusi, M., Izamshah, R., Shahir, M. (2016, November). Part Weight Verification Between Simulation And Experiment Of Plastic Part İn İnjection Moulding Process. In IOP Conference Series: Materials Science and Engineering (Vol. 160