Journals / MT Bilimsel / 2016 / Sayı: 10

Production of Boric Acid From Colemanite Ore by Oxalic Acid Leaching

Kolemanit Cevherinden Oksalik Asit Liçi ile Borik Asit Eldesi

Pages
11–20
Publication Date
2016-07-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Using optimum conditions (d100 = 0.075 mm; 5% solids (by weight); 50 g/L oxalic acid; 80±2oC leaching temperature; 90 minutes leaching time) for Emet colemanite sample (28.05% B2O3) on chemical leaching with oxalic acid experiments, the calculated boric acid extraction efficiency from colemanite ore was approximately 97.89% under the optimum conditions

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, Chemical leaching with oxalic acid, chemical analyzing and evaluation treatment on colemanite samples, were provided by Eti Mine Works General Directorate Emet-Kütahya colemanite factory, were completed using Yates sampling technique.
📊
Key Findings & Data:In this study, Chemical leaching with oxalic acid, chemical analyzing and evaluation treatment on colemanite samples, were provided by Eti Mine Works General Directorate Emet-Kütahya colemanite factory, were completed using Yates sampling technique.
💡
Conclusion & Impact:Using optimum conditions (d100 = 0.075 mm; 5% solids (by weight); 50 g/L oxalic acid; 80±2oC leaching temperature; 90 minutes leaching time) for Emet colemanite sample (28.05% B2O3) on chemical leaching with oxalic acid experiments, the calculated boric acid extraction efficiency from colemanite ore was approximately 97.89% under the optimum conditions
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Bor-oksit · Kimyasal Liç · Kolemanit

Abstract

In this study, Chemical leaching with oxalic acid, chemical analyzing and evaluation treatment on colemanite samples, were provided by Eti Mine Works General Directorate Emet-Kütahya colemanite factory, were completed using Yates sampling technique. Using optimum conditions (d100 = 0.075 mm; 5% solids (by weight); 50 g/L oxalic acid; 80±2oC leaching temperature; 90 minutes leaching time) for Emet colemanite sample (28.05% B2O3) on chemical leaching with oxalic acid experiments, the calculated boric acid extraction efficiency from colemanite ore was approximately 97.89% under the optimum conditions

Özet

Bu çalışmada, Eti Maden İşletmeleri Genel Müdürlüğü Emet-Kütahya kolemanit tesisinden temin edilen kolemanit numunelerine Yates deneysel düzen tekniğine göre oksalik asit ile kimyasal asit liç deneysel çalışmaları, kimyasal analiz ve değerlendirme işlemleri yapılmıştır. Bu deneysel çalışma sonucunda; Emet kolemanit cevherinin (%28,05 B2O3) oksalik asit ile yapılan kimyasal liç işleminde (d100 = 0,075 mm; %5 katı (ağırlıkça); 50 g/L oksalik asit; 80±2 oC liç sıcaklığı; 90 dk liç süresi) B2O3 in çözeltiye alma verimi %97,89’dur

🔖

Cite This Article

Arslan, V., Bayat, O. (2016). Production of Boric Acid From Colemanite Ore by Oxalic Acid Leaching. MT Bilimsel, Sayı: 10, 11–20. https://ajindex.com/articles/791933

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...