Journals / Journal of the Turkish Chemical Society Section A: Chemistry / 2018 / Cilt: 5 - Sayı: 2

EFFECT of IONIC LIQUID CONTENT on MONOLITHIC STRUCTURE of AMINE-MEDIATED SILICA AEROGEL via AMBIENT PRESSURE DRYING

Pages
663–678
Publication Date
2018-01-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Contact angle measurement also demonstrated that the desired monolithic sample has hydrophobic characteristic with a water contact angle value of 113˚.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, amine-mediated silica aerogels dried under the ambient conditions in monolithic form were prepared by following sol-gel method. 3-aminopropyltriethoxysilane (APTES) was involved to the synthesis as a silica co-precursor.
📊
Key Findings & Data:Imidazolium based short-chain ionic liquids (ILs) were incorporated into the silica gel structure to control the gel shrinkage within the pores, as well as to eliminate the capillary effect during the solvent evaporation.
💡
Conclusion & Impact:Contact angle measurement also demonstrated that the desired monolithic sample has hydrophobic characteristic with a water contact angle value of 113˚.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Ionic liquid · silica aerogel · APTES

Abstract

In this study, amine-mediated silica aerogels dried under the ambient conditions in monolithic form were prepared by following sol-gel method. 3-aminopropyltriethoxysilane (APTES) was involved to the synthesis as a silica co-precursor. Imidazolium based short-chain ionic liquids (ILs) were incorporated into the silica gel structure to control the gel shrinkage within the pores, as well as to eliminate the capillary effect during the solvent evaporation. A production procedure was developed to explore the synergistic effect of ionic liquids and amine functionalized silica precursor on the textural and chemical properties of the final silica gels. Surface modifications of the samples were performed by using 3-Methacryloxypropyltrimethoxysilane (MEMO) to ensure hydrophobic characteristics. To reveal the chemical and morphological characteristics of the resultant material, various analyses were conducted. SEM and FTIR analyses were performed to investigate the morphological and chemical structure, whereas TGA analysis was carried out to determine the thermal stability of the silica gels. As a result, ionic liquid embedded sample was obtained in a monolithic structure with a low density (0.45 g/cm3) and had a good thermal stability (up to 381 °C). Contact angle measurement also demonstrated that the desired monolithic sample has hydrophobic characteristic with a water contact angle value of 113˚.

🔖

Cite This Article

GİZLİ, N., ÇOK, S. S., KOÇ, F. (2018). EFFECT of IONIC LIQUID CONTENT on MONOLITHIC STRUCTURE of AMINE-MEDIATED SILICA AEROGEL via AMBIENT PRESSURE DRYING. Journal of the Turkish Chemical Society Section A: Chemistry, Cilt: 5 - Sayı: 2, 663–678. https://ajindex.com/articles/781404

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. C. M. Wu, S. Y. Lin, and H. L. Chen, “Structure of a monolithic silica aerogel prepared from a short-chain ionic liquid,” Microporous Mesoporous Mater., vol. 156, pp. 189–195, 2012. [11] A. Hilonga, J. K. Kim, P. B. Sarawade, and H. T. Kim, “Low-density TEOS-based silica aerogels prepared at ambient pressure using isopropanol as the preparative solvent,” J. Alloys Compd., vol. 487, no. 1–2, pp. 744–750, 2009. [12] T. Y. Wei, T. F. Chang, S. Y. Lu, and Y. C. Chang, “Preparation of monolithic silica aerogel of low thermal conductivity by ambient pressure drying,” J. Am. Ceram. Soc., vol. 90, no. 7, pp. 2003–2007, 2007. [13] R. Garay Martinez, E. Goiti, G. Reichenauer, S. Zhao, M. Koebel, and A. Barrio, “Thermal assessment of ambient pressure dried silica aerogel composite boards at laboratory and field scale,” Energy Build., vol. 128, pp. 111–118, 2016. [14] Z. T. Mazraeh-Shahi, A. M. Shoushtari, M. Abdouss, and A. R. Bahramian, “Relationship analysis of processing parameters with micro and macro structure of silica aerogel dried at ambient pressure,” J. Non. Cryst. Solids, vol. 376, pp. 30–37, 2013. [15] H. Yang, X. Kong, Y. Zhang, C. Wu, and E. Cao, “Mechanical properties of polymer-modified silica aerogels dried under ambient pressure,” J. Non. Cryst. Solids, vol. 357, no. 19–20, pp. 3447–3453, 2011. [16] A. Pons, L. Casas, E. Estop, E. Molins, K. D. M. Harris, and M. Xu, “A new route to aerogels: Monolithic silica cryogels,” J. Non. Cryst. Solids, vol. 358, no. 3, pp. 461–469, 2012. [17] M. Ivanova, S. Kareth, E. T. Spielberg, A. V. Mudring, and M. Petermann, “Silica ionogels synthesized with imidazolium based ionic liquids in presence of supercritical CO2,” J. Supercrit. Fluids, vol. 105, pp. 60–65, 2014. [18] J. Zhang, Y. Ma, F. Shi, L. Liu, and Y. Deng, “Microporous and Mesoporous Materials Room temperature ionic liquids as templates in the synthesis of mesoporous silica via a sol – gel method,” vol. 119, pp. 97–103, 2009. [19] M. Ivanova, S. Kareth, and M. Petermann, “Supercritical carbon dioxide and imidazolium based ionic liquids applied during the sol–gel process as suitable candidates for the replacement of classical organic solvents,” J. Supercrit. Fluids, vol. 132, no. July 2017, pp. 76–82, 2018. [1] M. Li, H. Jiang, D. Xu, O. Hai, and W. Zheng, “Low density and hydrophobic silica aerogels dried under ambient pressure using a new co-precursor method,” J. Non. Cryst. Solids, vol. 452, pp. 187–193, 2016. [20] A. Karout and A. C. Pierre, “Sil