Journals / Journal of Health Sciences and Medicine / 2022 / Cilt: 5 - Sayı: 2

Comparison of self-tapping and self-drilling screws in open reduction of mandible fracture

Pages
568–572
Publication Date
2022-03-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Conclusion: In the treatment of mandibular fractures with open reduction, surgeons should focus on plate-related parameters rather than self-drilling and self-tapping of screws, or drill diameter.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Objective: The purpose of this study is to assess the early postoperative stability of screw systems with mini plates in the treatment of open reduction mandibular angulus fractures.
📊
Key Findings & Data:Material and Method: This study consisted of 3 groups of mini plate or screw fixation: a 1.6 mm diameter drill for Group 1, a 1.2 mm diameter drill for Group 2, and self-drilling screws without drilling in Group 3.
💡
Conclusion & Impact:Conclusion: In the treatment of mandibular fractures with open reduction, surgeons should focus on plate-related parameters rather than self-drilling and self-tapping of screws, or drill diameter.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:self drilling screw · self tapping screw · open reduction

Abstract

Objective: The purpose of this study is to assess the early postoperative stability of screw systems with mini plates in the treatment of open reduction mandibular angulus fractures. Material and Method: This study consisted of 3 groups of mini plate or screw fixation: a 1.6 mm diameter drill for Group 1, a 1.2 mm diameter drill for Group 2, and self-drilling screws without drilling in Group 3. We used 9 hemimandibles, 9 plates, and 36 screws in each group. We compared the self-tapping and self-drilling screw systems while maintaining the plate system constant. We generated angulus fractures in 27 hemimandibles taken from 14 sheep mandibles. We separated the samples into 3 groups, each with 9 hemimandibles. All the screws used in the study were 2 mm in diameter and 5 mm in length. We used the servo hydraulic test unit to apply force to the hemimandibles. We applied forces of 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, and 150 N to the hemimandibles and recorded the resulting displacements. Data were analyzed with IBM SPSS V23, and conformity to normal distribution was evaluated by the Shapiro-Wilk test. Results: There was no difference between the groups in terms of the amount of displacement that occurred as a result of the applied forces. Conclusion: In the treatment of mandibular fractures with open reduction, surgeons should focus on plate-related parameters rather than self-drilling and self-tapping of screws, or drill diameter.

🔖

Cite This Article

SANCAR, B., ÜSTÜNDAĞ, İ. (2022). Comparison of self-tapping and self-drilling screws in open reduction of mandible fracture. Journal of Health Sciences and Medicine, Cilt: 5 - Sayı: 2, 568–572. https://ajindex.com/articles/776610

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Haug RH, Prather J, Indresano AT. An epidemiologic survey of facial fractures and concomitant injuries. J Oral Maxillofac Surg 1990; 48: 926-32.
  2. Adeyemo WL, Iwegbu IO, Bello SA, et al. Management of mandibular fractures in a developing country: a review of 314 cases from two urban centers in Nigeria. World J Surg 2008; 32: 2631-5.
  3. Sakr K, Farag IA, Zeitoun IM. Review of 509 mandibular fractures treated at the University Hospital, Alexandria, Egypt. Br J Oral Maxillofac Surg 2006; 44: 107-11. Motamedi MHK. An assessment of maxillofacial fractures: a 5-year study of 237 patients. J Oral Maxillofac Surg 2003; 61: 61-4.
  4. Chuong R, Donoff RB, Guralnick WC. A retrospective analysis of 327 mandibular fractures. J Oral Maxillofac Surg 1983; 41: 305-9. Ellis III E. Treatment methods for fractures of the mandibular angle. Int J Oral Maxillofac Surg 1999; 28: 243-52.
  5. Schierle HP, Schmelzeisen R, Rahn B, Pytlik C. One-or two-plate fixation of mandibular angle fractures? J Cranıo Maxıll Surg 1997; 25: 162-8.
  6. Olate S, Assis AF, Pozzer L, Cavalieri-Pereira L, Asprino L, Moraes M. Pattern and treatment of mandible body fracture. Int J Burns Travma 2013; 3: 164. Iatrou I, Samaras C, Theologie-Lygidakis N. Miniplate osteosynthesis for fractures of the edentulous mandible: a clinical study 1989–96. J Cranıo Maxıll Surg 1998; 26: 400-4.
  7. Sauerbier S, Schön R, Otten JE, Schmelzeisen R, Gutwald R. The development of plate osteosynthesis for the treatment of fractures of the mandibular body–A literature review. J Cranıo Maxıll Surg 2008; 36: 251-9.
  8. Van Sickels JE, Cunningham LL. Management of atrophic mandible fractures: are bone grafts necessary? J Oral Maxillofac Surg 2010; 68: 1392-5.
  9. Champy M, Lodde JP, Schmitt R, Jaeger JH, Müster D. Mandibular osteosynthesis by miniature screwed plates via a buccal approach. J maxillofac Surg 1978; 6: 14-21.
  10. Guimond C, Johnson JV, Marchena JM. Fixation of mandibular angle fractures with a 2.0-mm 3-dimensional curved angle strut plate. J Oral Maxillofac Surg 2005; 63: 209-14.
  11. Schortinghuis J, Bos RK, Vissink A. Complications of internal fixation of maxillofacial fractures with microplates. J Oral Maxillofac Surg 1999; 57: 130-4.
  12. Son S, Motoyoshi M, Uchida Y, Shimizu N. Comparative study of the primary stability of self-drilling and self-tapping orthodontic miniscrews. Am J Orthod Dentofac 2014; 145: 480-5.
  13. Sowden D, Schmitz JP. AO self-drilling and self-tapping screws in rat calvarial bone: an ultrastructural study of the implant interface. J