SavedAdd your journal

Journals / İleri Mühendislik Çalışmaları ve Teknolojileri Dergisi / 2022 / Cilt: 3 - Sayı: 1

Physical and Mechanical Properties of Geosynthetic Clay Covers

Geosentetik Kil Örtülerin Fiziksel ve Mekaniksel Özellikleri

Kaveh DEHGHANIAN
Esra SARİAY
Pages
34–56
Publication Date
2022-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this paper, the physical and mechanical properties of GCL has been studied.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Geosynthetic Clay Liners (GCL); is a material consisting of a fine granular powder or sodium bentonite placed betweentwo layers of a geosynthetic material, usually a geotextile or geomembrane.
📊
Key Findings & Data:GCLs; The bentonite contained in thegeotextiles on both sides is bonded with an adhesive, needle punch or suture bonding.
💡
Conclusion & Impact:In this paper, the physical and mechanical properties of GCL has been studied.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Geosentetik Kil Katmanlar (GCL) · Geokompozit · Sıkıştırılmış Kil Katmanlar (CCL)

Abstract

Geosynthetic Clay Liners (GCL); is a material consisting of a fine granular powder or sodium bentonite placed betweentwo layers of a geosynthetic material, usually a geotextile or geomembrane. GCLs; The bentonite contained in thegeotextiles on both sides is bonded with an adhesive, needle punch or suture bonding. Needle punching causes somefibers in the upper geotextile to extend into the bentonite and lower geotextile, binding the entire structure together. Fiberspierced in the lower geotextile either rely on natural entanglement and friction to hold the GCL together, or are heatedand fused to the underlying geotextile, potentially creating a stronger bond between the two geotextiles and bentonite.Bentonite is the most important component of GCLs and is a granular clay composed of highly adsorbing volcanic ash(usually sodium bentonite). This material has high water retention and swelling potential. The hydraulic properties andconductivity of GCLs vary depending on the quality of the clay used. The properties of bentonite clay can be enhancedby adding other additives. In this paper, the physical and mechanical properties of GCL has been studied.

Özet

Geosentetik Kil Örtüleri (GCL); genellikle bir geotekstil veya geomembran olan bir geosentetik malzemenin iki katmanıarasına konan ince bir granüler toz veya sodyum bentonitten oluşan malzemedir. GCL’ler; her iki taraftaki geotekstilleriniçerdiği bentonit ile bir yapıştırıcı, iğneyle delme veya dikiş bağlama ile yapıştırılır. İğne delme işlemi, üsttekigeotekstildeki bazı liflerin tüm yapıyı birbirine bağlayarak bentonit ve alt geotekstile uzanmasına neden olur. Altgeotekstilde delinen lifler ya GCL'yi bir arada tutmak için doğal dolanma ve sürtünmeye dayanır ya da ısıtılarak alttakigeotekstile kaynaşarak potansiyel olarak iki geotekstil ve bentonit arasında daha güçlü bir bağ oluşturur. BentonitGCL’lerin en önemli bileşenidir ve yüksek oranda adsorbe eden volkanik küllerden oluşan (genellikle sodyum bentonittir)granüler kildir. Bu malzeme yüksek su tutma ve şişme potansiyeline sahiptir. GCL’lerin hidrolik özellikleri ve iletkenliğikullanılan kilin kalitesine bağlı olarak değişmektedir. Bentonit kilinin özellikleri başka katkı maddeleri de eklenerekgüçlendirilebilir. Bu makale kapsamında, geosentetik malzeme türlerinden olan Geosentetik Kil Örtüsü malzemesininfiziksel ve mekaniksel özellikleri ele alınmıştır.

🔖

Cite This Article

DEHGHANIAN, K., SARİAY, E. (2022). Physical and Mechanical Properties of Geosynthetic Clay Covers. İleri Mühendislik Çalışmaları ve Teknolojileri Dergisi, Cilt: 3 - Sayı: 1, 34–56. https://ajindex.com/articles/770155

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Athanassopoulos, C. (2011). Geosynthetic clay liners in coal combustion residual containment applications. In World of Coal Ash (WOCA) Conference, Denver, CO, USA http://www. flyash. info. Aydın, M. C., & Gelberi, G. (2018). Morgedik Barajı Geçirimsizlik Problemi ve Çözüm Uygulaması. Su Kaynakları, 3(2), 1-7.
  2. Budihardjo, M., Chegenizadeh, A., & Nikraz, H. (2012). A review of key factors on Geosynthetic clay liners’ performance as liner system. International Journal of Biological, Ecological and Environmental Sciences, 1(3), 117-119.
  3. Bouazza, A. (2002). Geosynthetic clay liners. Geotextiles and Geomembranes, 20(1), 3-17.
  4. Bouazza, A., Gates, W. P., & Abuel-Naga, H. (2006). Factors impacting liquid and gas flow through geosynthetic clay liners. Geosynthetics–Recent Developments. Commemorating Two Decades of Geosynthetics in India, 119-146.
  5. Elseifi, M. A., Al-Qadi, I. L., Loulizi, A., & Wilkes, J. (2001). Performance of geocomposite membrane as pavement moisture barrier. Transportation research record, 1772(1), 168-173.
  6. Guyonnet, D., Touze-Foltz, N., Norotte, V., Pothier, C., Didier, G., Gailhanou, H.,. & Warmont, F. (2009). Performance-based indicators for controlling geosynthetic clay liners in landfill applications. Geotextiles and Geomembranes, 27(5), 321-331.
  7. GCL Brochure Cetco. (2017) “solutions for containment and remediation”. Ghazizadeh, S., & Bareither, C. (2018). Critical strength of high peel strength geosynthetic clay liners at low normal stresses. Tailing and Mine waste 2018.
  8. Ghazizadeh, S., & Bareither, C. A. (2021). Failure mechanisms of geosynthetic clay liner and textured geomembrane composite systems. Geotextiles and Geomembranes, 49(3), 789-803.
  9. Maubeuge, K.P., Coulson, J.P., & Hedrich, F. (2006). Landfill Cap Design With Geosynthetic Clay Liners, Proceedings of the International Symposium, Nuremberg, Germany, 16-17 April 2002.
  10. Kommu, S., & Asadi, S. S. (2020, February). Suitability Of Geocomposite Layer For Fly Ash Ponds. In Journal of Physics: Conference Series (Vol. 1455, No. 1, p. 012029).
  11. IOP Publishing. Lange, K., Rowe, R. K., & Jamieson, H. (2004). Metal migration in geosynthetic clay liners. In Proceedings of the GeoQuebec2004 (October) Conference Quebec. Lu, Y., Abuel-Naga, H., Leong, E. C., Bouazza, A., & Lock, P. (2018). Effect of water salinity on the water retention curve of geosynthetic clay liners. Geotextiles and Geomembranes, 46(6), 707-714.
  12. Rouhollah, S. G., Fazlollah, S., & Bahador, A. (2013). Study of geosynthetic cla