Journals / International Journal of Innovative Research and Reviews / 2022 / Cilt: 6 - Sayı: 1

CFD analysis of using umbrella shaped turbulators to improve heat transfer in a horizontal pipe

Pages
30–34
Publication Date
2022-07-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In addition, it was concluded that turbulent kinetic energy is an important parameter inincreasing the heat transfer.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Heat transfer in pipes has an important place in the industry.
📊
Key Findings & Data:In this study, the effects of umbrella-shaped turbulators with different angles (45o, 60o and 75o) on the heat transfer characteristics,placed in a horizontal pipe with a constant 20000 W/m2 heat flux from its surface, were investigated numerically.
💡
Conclusion & Impact:In addition, it was concluded that turbulent kinetic energy is an important parameter inincreasing the heat transfer.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Heat transfer enhancement · Pipe heat transfer · Flow inserts

Abstract

Heat transfer in pipes has an important place in the industry. For this purpose, many studies have been carried out toinvestigate the effects of elements with different geometries placed in the pipe on the heat transfer characteristics. In this study, the effects of umbrella-shaped turbulators with different angles (45o, 60o and 75o) on the heat transfer characteristics,placed in a horizontal pipe with a constant 20000 W/m2 heat flux from its surface, were investigated numerically. When the results of the study were examined, it was determined that the heat transfer was higher in cases where the umbrella opening was higher than in other cases. The maximum Nusselt number obtained in the study was determined to be 171.25 in the case of the 45 degree turbulator and 15000 Reynolds number. In addition, it was concluded that turbulent kinetic energy is an important parameter inincreasing the heat transfer.

🔖

Cite This Article

ÖZAKIN, A. N. (2022). CFD analysis of using umbrella shaped turbulators to improve heat transfer in a horizontal pipe. International Journal of Innovative Research and Reviews, Cilt: 6 - Sayı: 1, 30–34. https://ajindex.com/articles/767532

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Bergles AE. The implications and challenges of enhanced heat transfer for the chemical process industries. Chemical Engineering Research and Design(2001) 79(4):437–444. [2]Rohsenow WM, Hartnett JP, Cho YI. Handbook of heat transfer. New York: McGraw-Hill (1998). [3]Cengel YA. Introduction to thermodynamics and heat transfer: Engineering: McGraw-Hill (2008). [4]Afshari F, Zavaragh H, Nicola G. Numerical analysis of ball-type turbulators in tube heat exchangers with computational fluid dynamic simulations. International journal of environmental science and technology(2019) 16(7):3771–3780. [5]Sungur B, Topaloğlu B. Numerıcal Determınatıon Of Optımum Number Of Conıcal Turbulators Placed In Smoke Tubes. Technological Applied Sciences (NWSATAS(2018) 13(3):208–218. [6]Kahraman N, Sekmen U, Çeper B, Akansu O. Numerıcal Investigatıon Of Effect Of Turbulator On Heat Transfer In Pıpe Flows. J. of Thermal Science and Technology(2008) 28(2):51–59. [7]Şahin H, Dal AR, Özkaya M. Numerical Analisis by RNG k-ε Turbulent Model of a Concentric Tube Heat Exchanger with Coiled Wire Turbulator. GU J Sci, Part C(2020) 8(1):64–78. [8]Şahin H, Baysal E, Dal AR, Şahin N. Investigation of heat transfer enhancement in a new type heat exchanger using solar parabolic trough systems. International Journal of Hydrogen Energy(2015) 40(44):15254–15266. [9]Xiong Q, IzadiM, Shorirad M, Shehzad S, Mohammed H. 3D Numerical Study of Conical and Fusiform Turbulators for Heat Transfer Improvement in a Double-Pipe Heat Exchanger. International Journal of Heat and Mass Transfer(2021) 170:120995. [10]Shabanian S, Rahimi M, Shahhosseini M, Alsairafi A. CFD and experimental studies on heat transfer enhancement in an air cooler equipped with different tube inserts. International Communications in Heat and Mass Transfer(2011) 38(3):383–390. [11]Mohamad AA. Heat transfer enhancements in heat exchangers fitted with porous media. Part I: constant Wall temperature. International Journal of Thermal Sciences(2003) 42(4):385–395. [12]Lauriat G, Ghafir R. Forced convective transfer in porous media. New York, NY, USA: Marcel Dekker (2000). [13]Jang JY, Chen JL. Forced convection in a parallel plate channel partially filled with a high porosity medium. International Communications in Heat and Mass Transfer(1992) 19(2):263–273. [14]Al-Nimr MA, Alkam MK. Unsteady non-Darcian forced convection analysis in an annulus partially filled with a porous material. Journal of Heat Transfer(1997) 119(4):799–804. [15]Alkam