Journals / Gazi Üniversitesi Gazi Eğitim Fakültesi Dergisi / 2010 / Cilt: 30 - Sayı: 3

Preparation of Amperometric Enzyme Electrode Based on Polyphenol Oxidase for Determination of Phenolic Compounds

Fenolik Bileşiklerin Tayini için Polifenol Oksidaz Temelli Amperometrik Enzim Elektrot Hazırlanması

Pages
955–978
Publication Date
2010-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Optimum type of buffer, buffer concentration, pH, temperature and working potential were determinated as phos

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, amperometric enzyme electrodes based on polymer film for determination phenolic compounds were prepared.
📊
Key Findings & Data:For this purpose platin electrodes were modified by electropolymerization using asetonitril-water mixture containing o-phenylenediamine (o-PD) or o-phenylenediamine C and -0.20 V (vs.
💡
Conclusion & Impact:Optimum type of buffer, buffer concentration, pH, temperature and working potential were determinated as phos
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Amperometri · Enzim elektrot · Fenolik bileşikler

Abstract

In this study, amperometric enzyme electrodes based on polymer film for determination phenolic compounds were prepared. For this purpose platin electrodes were modified by electropolymerization using asetonitril-water mixture containing o-phenylenediamine (o-PD) or o-phenylenediamine C and -0.20 V (vs. Ag/AgCl) respectively. The linear working range of 1.96×10-6-3.5×10-5 M. Response time, reusability, life time, and amperometric responses to other phenolic compounds were also investigated.and 3-methylthiophene (3MT). Polyphenol oxidase was immobilized onto Pt/PoPD and Pt/PoPD-3MT electrodes and amperomeric responses to pyrocatechol were investigated. Pt/PoPD-3MT/POx electrode that obtained higher sensitivity was used for determination of working conditions and performance factors. Optimum type of buffer, buffer concentration, pH, temperature and working potential were determinated as phos

Özet

Bu çalışmada, fenolik bileşiklerin tayini için polimer film temelli amperometrik enzim elektrotlar hazırlandı. Bu amaçla, o-fenilendiamin (o-PD) veya o-PD ve 3-metiltiyofen (3-MT) içeren asetonitril-su karışımı kullanılarak platin elektrotlar elektropolimerizasyon yoluyla modifiye edildi. Hazırlanan Pt/PoPD ve Pt/PoPD-3MT elektrotlara polifenol oksidaz (POx) enzimi immobilize edildi ve elektrotların pirokateşole duyarlıkları belirlendi. Daha yüksek duyarlığın elde edildiği Pt/PoPD-3MT/POx elektrot ile çalışma koşulları ve performans faktörleri çalışıldı. Pt/PoPD-3MT/POx elektrot için optimum tampon cinsi, tampon derişimi, pH\'sı, sıcaklık ve çalışma potansiyeli sırasıyla fosfat; 0,10 M; 7,0; 25°C ve Ag/AgCl\'e karşı -0,20 V olarak belirlendi. Enzim elektrodun doğrusal çalışma aralığı 1,96×10–6- 3,50×10-5M olarak belirlendi. Enzim

🔖

Cite This Article

ZEYBEK, D. K., ZEYBEK, B., PEKMEZ, N. Ö., KILIÇ, E., PEKYARDIMCI, Ş. (2010). Preparation of Amperometric Enzyme Electrode Based on Polyphenol Oxidase for Determination of Phenolic Compounds. Gazi Üniversitesi Gazi Eğitim Fakültesi Dergisi, Cilt: 30 - Sayı: 3, 955–978. https://ajindex.com/articles/760094

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Ameer, Q. and Adeloju, S.B. (2009). Development of a potentiometric catechol biosensor by entrapment of tyrosinase within polyprrole film. Sensors and Actuators B, 140, 4-11.
  2. Bagheri, H., Mohammadi, A. and Salemi, A. (2004). On-line trace enrichment of phenolic compounds from water using a pyrrole-based polymer as the solidphase extraction sorbent coupled with high-performance liquid chromatography, Analytica Chimica Acta, 513, 445–449.
  3. Cosnier, S., Fologea, D., Szunerits, S. and Marks R.S. (2000). Poly(dicarbazole-Nhyroxysuccinimide) film: a new polymer for the reagentless grafting of enzymes and redox mediators, Electrochemistry Communications, 2, 827-831.
  4. Curulli, A. Kelly, S., O’Sullivan, C., Guilbault, G.G. and Palleschi, G. (1998). A new interference-free lysine using a non-conducting polymer film. Biosensors and Bioelectronics, 13, 1245-1250.
  5. Dai, Y.Q., Zhou, D.M. and Shiu, K.K. (2006). Permeability and permselectivity of polyphenilenedimine films synthesized at palladium disk electrode. Electrochimica Acta, 52, 297-303.
  6. Dempsey, E., Diamond, D. and Collier, A. (2004). Development of a biosensor for endocrine disrupting compounds based on tyrosinase entrapped within a poly(thionine ) film. Biosensors and Bioelectronics, 20, 367-377.
  7. Fan, Q., Shan, D., Xue, H., He, Y. and Cosnier, S. (2007). Amperometric phenol biosensor based on laponite clay-chitosan nanocomposite matrix. Biosensors and Bioelectronics, 22, 816-821.
  8. Garjonyte, R. and Malinauskas, A. (1999). Amperometric glucose biosensor based on glucose oxidase immobilized in poly(o-phenlylenediamine) layer. Sensors and Actuators B, 56, 85-92.
  9. Gupta, G., Rajendran, V. and Atanassov, P. (2003). Laccase biosensor on monolayermodified gold electrode. Electroanalysis, 15 (20), 1577-1583.
  10. Imabayashi, S., Kong, Y. and Watanabe, M. (2001). Amperometric biosensor for polyphenol based on horseradish peroxidase immobilized on gold electrodes. Electroanalysis, 13(5), 408-412.
  11. Kochana, J., Nowak, P., Jarosz-Wilkolazka, A.J., Bioeron, M. (2008). Tyrosinase/laccase bienzyme biosensor for amperometric determination of phenolic compounds. Microchemical Journal, 89, 171-174.
  12. Li, Y.F., Liu, Z.M., Liu, Y.L., Yang, Y.H. Shen, G.L., Yu, R.Q. (2006). A mediator-free phenol biosensor based on immobilizing tyrosinase to ZnO nanoparticles. Analytical Biochemistry, 349, 33-40.
  13. Liu, S., Yu, J. and Ju, H. (2003). Renewable phenol biosensor based on a tyrosinasecolloidal gold modified carbon paste electrode. Journal of Electro