Journals / European Journal of Research in Dentistry / 2021 / Cilt: 5 - Sayı: 2

Evaluation Of Bonding Strength Of Composite Resins To Laser Applicated Dentin Surfaces

Lazerle Pürüzlendirilen Dentin Yüzeyine Kompozit Rezinlerin Mikro Bağlanma Dayanımlarının İncelenmesi

Pages
57–63
Publication Date
2021-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Conclusions: Er: YAG laser application did not increase the bond strength to dentin; it has been observed that bonding strengths of bulk fill and conventional composites are similar.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Objectives: The aim of this study is to determine the microtensile bond strength (µTBS) of two different composite resins on flat dentin surfaces, which were roughened with three different applications using different frequencies and modes of the Er:YAG laser.
📊
Key Findings & Data:Materials and Methods: This study was performed on 32 third molar teeth.
💡
Conclusion & Impact:Conclusions: Er: YAG laser application did not increase the bond strength to dentin; it has been observed that bonding strengths of bulk fill and conventional composites are similar.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Adezyon · Bulk fill · Er:YAG lazer

Abstract

Objectives: The aim of this study is to determine the microtensile bond strength (µTBS) of two different composite resins on flat dentin surfaces, which were roughened with three different applications using different frequencies and modes of the Er:YAG laser. Materials and Methods: This study was performed on 32 third molar teeth. Teeth were randomly selected and divided into four groups, Er:YAG laser 1, Er:YAG laser 2, Er:YAG laser 3 and control group. Futurabond SingleDose VOCO adhesive system was used in all groups. Each gruop was divided into two sub-groups based on composite types (X-tra Fill VOCO, Grandio VOCO). 6 rods were obtained from the center of each tooth. µTBS test was applied to all samples and data was collected. Statistical analysis was performed in Sigmaplot 14 software. Results: There was no statistically significant difference between the median values of the groups (p=0,0964). The highest bonding value was seen in the control group without Er:YAG laser application. Conclusions: Er: YAG laser application did not increase the bond strength to dentin; it has been observed that bonding strengths of bulk fill and conventional composites are similar.

Özet

Amaç: Bu çalışmada, Er:YAG lazerin farklı frekans ve modları kullanılarak 3 farklı uygulamayla pürüzlendirilen düz dentin yüzeylerinde, tek adeziv sistem ve farklı kompozit materyalleri uygulanarak dentine mikrogerilim bağlanma kuvvetlerinin (µTBS) belirlenmesi ve bağlanma dayanımı üzerine etkilerinin incelenmesi amaçlanmıştır. Gereç ve Yöntem: 32 adet insan 3. büyük azı dişinde düz dentin yüzeyleri hazırlanmıştır. Dişler rastgele 4 gruba ayrılarak Er:YAG lazer 1, Er:YAG lazer 2, Er:YAG lazer 3 ve kontrol grupları hazırlanmıştır. Lazer kullanılan gruplarda ve kontrol grubunda pürüzlendirme işlemleri yapıldıktan sonra tek aşamalı self etch (Futurabond M SingleDose VOCO) uygulanmıştır. Her bir grup, X-tra fil VOCO (bulk) ve Grandio VOCO (inkremental) kompozit uygulananlar olmak üzere iki alt gruba ayrılmıştır. Tüm dişlerin merkezinden 6’şar adet çubuk şeklinde numune elde edilmiştir. Tüm numunelere µTBS testi uygulanmıştır. İstatistiksel analiz testleri Sigmaplot 14 paket programında yapılmıştır. Bulgular: Kruskal-Wallis testinin sonuçlarına göre grupların median değerleri arasında istatistiksel olarak anlamlı bir farklılık olmadığı görülmüştür (p=0.964). Grupların ortalama değerlerine bakıldığında, her 4 grupta da birbirine yakın değerler elde edilmiştir. En yüksek bağlanma değerleri; Er:YAG lazer uygulanmayan kontrol grubunda gözlenmiştir. Sonuç: Er:YAG lazer uygulamasının dentine bağlanma dayanımını arttırmadığı; bulk fill ve geleneksel kompozitlerin bağlanma kuvvetlerinin benzer olduğu görülmüştür.

🔖

Cite This Article

GÜRSES, M., TAĞTEKİN, D., PEKER, M. S., YANİKOGLU, F. (2021). Evaluation Of Bonding Strength Of Composite Resins To Laser Applicated Dentin Surfaces. European Journal of Research in Dentistry, Cilt: 5 - Sayı: 2, 57–63. https://ajindex.com/articles/757845

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Pamir T, Türkün M. Factors affecting microleakage of a packable resin composite: an in vitro study. Oper Dent. 2005 May;30(3):338–45
  2. Petrovic LM, Zorica DM, Stojanac IL, Krstonosic VS, Hadnadjev MS, Atanackovic TM. A model of the viscoelastic behavior of flowable resin composites prior to setting. Dent Mater. 2013 Sep;29(9):929–34
  3. Bicalho AA, Pereira RD, Zanatta RF, Franco SD, Tantbirojn D, Versluis A, et al. Incremental filling technique and composite material--part I: cuspal deformation, bond strength, and physical properties. Oper Dent. 2014 Mar;39(2):E71–82
  4. Bicalho AA, Valdívia ADCM, Barreto BCF, Tantbirojn D, Versluis A, Soares CJ. Incremental filling technique and composite material--part II: shrinkage and shrinkage stresses. Oper Dent. 2014 Mar;39(2):E83–92
  5. Ilie N, Hickel R. Investigations on a methacrylate-based flowable composite based on the SDRTM technology [Internet]. Vol. 27, Dental Materials. 2011. p. 348–55. Available from:
  6. Jang J-H, Park S-H, Hwang I-N. Polymerization shrinkage and depth of cure of bulk-fill resin composites and highly filled flowable resin. Oper Dent. 2015 Mar;40(2):172–80
  7. Heintze SD, Rousson V. Clinical effectiveness of direct class II restorations - a meta-analysis. J Adhes Dent. 2012 Aug;14(5):407–31
  8. Bader C, Krejci I. Indications and limitations of Er:YAG laser applications in dentistry. Am J Dent. 2006 Jun;19(3):178–86
  9. Ceballos L, Toledano M, Osorio R, Tay FR, Marshall GW. Bonding to Er-YAG-laser-treated Dentin [Internet]. Vol. 81, Journal of Dental Research. 2002. p. 119–22. Available from:
  10. Schreiner RF, Chappell RP, Glaros AG, Eick JD. Microtensile testing of dentin adhesives. Dent Mater. 1998 Jun;14(3):194–201
  11. Pashley DH, Carvalho RM, Sano H, Nakajima M, Yoshiyama M, Shono Y, et al. The microtensile bond test: a review. J Adhes Dent. 1999 Winter;1(4):299–309
  12. Sano H, Chowdhury AFMA, Saikaew P, Matsumoto M, Hoshika S, Yamauti M. The microtensile bond strength test: Its historical background and application to bond testing. Jpn Dent Sci Rev. 2020 Dec;56(1):24–31
  13. Van Meerbeek B, Peumans M, Poitevin A, Mine A, Van Ende A, Neves A, et al. Relationship between bond-strength tests and clinical outcomes [Internet]. Vol. 26, Dental Materials. 2010. p. e100–21. Available from:
  14. De Munck J, Van Landuyt K, Peumans M, Poitevin A, Lambrec