Journals / European Journal of Engineering and Applied Sciences / 2022 / Cilt: 5 - Sayı: 1

Experimental Study on the Energy Absorption Behavior of Syntactic Foam-Filled Thin-Walled Tubes

Boşluklu Köpük Dolgulu Ince Duvarlı Tüplerin Enerji Absorpsiyon Davranışı Üzerine Deneysel Çalışma

Pages
37–41
Publication Date
2022-07-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is found that the addition of syntactic foam to the aluminum tube increases the specific absorbed energy by 42 %.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Thin-walled profiles with different core structures have been utilized to obtain lightweight energy absorbers.
📊
Key Findings & Data:In this paper, syntactic foams introduced aluminum tubes.
💡
Conclusion & Impact:It is found that the addition of syntactic foam to the aluminum tube increases the specific absorbed energy by 42 %.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Alüminyum boru · Boşluklu köpük · Çarpışmaya Dayanıklılık

Abstract

Thin-walled profiles with different core structures have been utilized to obtain lightweight energy absorbers. In this paper, syntactic foams introduced aluminum tubes. Syntactic foams are composed of epoxy resin and expanded glass granules. The energy absorption behavior of empty tubes and syntactic foam-filled tubes are studied through quasi-static axial compression tests. The effects of the interaction between the tube and the foam on the deformation mode are analyzed in the aspect of several parameters such as specific energy absorption, energy absorption effectiveness, initial peak load, and average load. It is found that the addition of syntactic foam to the aluminum tube increases the specific absorbed energy by 42 %.

Özet

Hafif enerji emiciler elde etmek için farklı çekirdek yapılarına sahip ince cidarlı profiller değerlendirilmektedir. Bu çalışmada, boşluklu köpükler alüminyum tüplere doldurulmuştur. Boşluklu köpükler, epoksi reçine ve genleştirilmiş camdan oluşturulmuştur. Boş tüplerin ve boşluklu köpük dolgulu tüplerin enerji absorpsiyon davranışı, statik eksenel sıkıştırma testi ile araştırılmıştır. Tüp ve köpük arasındaki etkileşim ve bunun deformasyon modu üzerindeki etkisi araştırılmıştır. Spesifik enerji absorpsiyonu, enerji absorpsiyon etkinliği, ilk tepe yük, ortalama yük gibi çeşitli parametreler karşılaştırılmıştır. Geliştirilen boşluklu köpüğün aluminyum boruya ilavesi spesifik enerji absorpsiyonunda %42 iyileştirme sağlamıştır.

🔖

Cite This Article

ÇINAR, K. (2022). Experimental Study on the Energy Absorption Behavior of Syntactic Foam-Filled Thin-Walled Tubes. European Journal of Engineering and Applied Sciences, Cilt: 5 - Sayı: 1, 37–41. https://ajindex.com/articles/757681

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Xu, F., Zhang, X., & Zhang, H. (2018). A review on functionally graded structures and materials for energy absorption. Engineering structures, 171, 309–325.
  2. Song, J., Xu, S., Xu, L., Zhou, J., & Zou, M. (2020). Experimental study on the crashworthiness of bio-inspired aluminum foam-filled tubes under axial compression loading. Thin–walled structures, 155, 106937. Altin, M., Güler, M. A., & Mert, S.K. (2017). The effect of percent foam fill ratio on the energy absorption capacity of axially compressed thin-walled multi-cell square and circular tubes. International journal of mechanical sciences, 131–132, 368–379.
  3. An, X., Gao, Y., Fang, J., Sun, G., & Li, Q. (2015). Crashworthiness design for foam-filled thin-walled structures with functionally lateral graded thickness sheets. Thin-walled structures, 91, 63–71.
  4. Yin, H., Wen, G., Liu, Z., & Qing, Q. (2014). Crashworthiness optimization design for foam-filled multi-cell thin-walled structures. Thin-walled structures, 75, 8–17.
  5. Kılıçaslan, C. (2015). Numerical crushing analysis of aluminum foam-filled corrugated single- and double-circular tubes subjected to axial impact loading. Thin-walled structures, 96, 82–94.
  6. Hou, S.,Li, Q., Long, S., Yang, X., & Li, W. (2009). Crashworthiness design for foam filled thin-wall structures. Materials and design, 30, 2024–2032.
  7. Li, G., Zhang, Z., Sun, G., Xu, F., & Huang, X. (2014). Crushing analysis and multi objective optimization for functionally graded foam-filled tubes under multiple load cases. International journal of mechanical sciences, 89, 439–452.
  8. Lia, Z., Chen, R., & Lu, F. (2018). Comparative analysis of crashworthiness of empty and foam-filled thin walled tubes Thin-walled structures, 124, 343–349.
  9. Wang, H., Su, M., & Hao, H. (2020). The quasi-static axial compressive properties and energy absorption behavior of ex-situ ordered aluminum cellular structure filled tubes. Composite structures, 239 112039
  10. Sun, G., Wang, Z., Yu, H., Gong, Z., & Li, Q. (2019). Experimental and numerical investigation into the crashworthiness of metal foam- composite hybrid structures. Composite structures, 209, 535-547.
  11. Mohammadiha, O., & Ghariblu, H. (2016). Crush behavior optimization of multi-tubes filled by functionally graded foam. Thin-walled structures, 98, 627–639.
  12. Yalçın, M. M., & Genel, K. (2019). On the axial deformation characteristic of PVC foam-filled circular aluminium tube: Effect of radially-graded foam filling. Thin-walled structures, 144, 106335. Ali Ghamarian, A., Z