SavedAdd your journal

Journals / Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi / 2011 / Cilt: 24 - Sayı: 2

Numerıcal Estımatıon Of The Condensate Flow Rate On The Condenser Pıpe

Nihal UĞURLUBİLEK
Pages
41–50
Publication Date
2011-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This method; especially, in the experimental studies thought the condensing condition, the fact that the heat transfer coefficient on the pipe’s outer surface and condensate flow rate are predicted numerically and some probable ideas about the experiment can be discussed previously is able to be obtained.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper, using Fluent computational fluid dynamics program, the condensing water flow rate was numerically estimated calculating the outer surface- heat transfer coefficient of the condenser pipe.
📊
Key Findings & Data:The outer environment is saturated vapour.
💡
Conclusion & Impact:This method; especially, in the experimental studies thought the condensing condition, the fact that the heat transfer coefficient on the pipe’s outer surface and condensate flow rate are predicted numerically and some probable ideas about the experiment can be discussed previously is able to be obtained.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Heat transfer · condensation · condenser

Abstract

In this paper, using Fluent computational fluid dynamics program, the condensing water flow rate was numerically estimated calculating the outer surface- heat transfer coefficient of the condenser pipe. An user defined function wroten with C++ code was interpreted to Fluent program. The fluid is water, the flow is single phase, steady state and turbulent. The outer environment is saturated vapour. This method; especially, in the experimental studies thought the condensing condition, the fact that the heat transfer coefficient on the pipe’s outer surface and condensate flow rate are predicted numerically and some probable ideas about the experiment can be discussed previously is able to be obtained.

Özet

In this paper, using Fluent computational fluid dynamics program, the condensing water flow rate was numerically estimated calculating the outer surface- heat transfer coefficient of the condenser pipe. An user defined function wroten with C++ code was interpreted to Fluent program. The fluid is water, the flow is single phase, steady state and turbulent. The outer environment is saturated vapour. This method; especially, in the experimental studies thought the condensing condition, the fact that the heat transfer coefficient on the pipe’s outer surface and condensate flow rate are predicted numerically and some probable ideas about the experiment can be discussed previously is able to be obtained.

🔖

Cite This Article

UĞURLUBİLEK, N. (2011). Numerıcal Estımatıon Of The Condensate Flow Rate On The Condenser Pıpe. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, Cilt: 24 - Sayı: 2, 41–50. https://ajindex.com/articles/755128

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. R. L., Webb,“Principles of Enhanced Heat Transfer”, Wiley, Newyork, 1994
  2. F.,V., Incropera and D., P., DeWitt,“Fundamentals of Heat and Mass Transfer”, 4. Ed., Wiley,1996
  3. Fluent User’s Guide,Version 4.4. Fluent Inc. Lebanon. NH., 1996
  4. N., Ugurlubilek, “Numerical and Experimental Analysis of Fluid Flow and Convective Heat Transfer in Mini- Channels”, Doctoral thesis, Eskisehir Osmangazi University, 2007, Mechanical Engineering, pp.100
  5. B. E., Launder, and D. B., Spalding, “Lectures in Mathematical Models of Turbulence”, Academic Press, London, England, 1972
  6. S.V., Patankar, “Numerical Heat Transfer and Fluid Flow”, Hemisphere, McGraw-Hill, Washington, DC, 79-138, 1980
  7. B. S., Petukhov, “Advances Heat Transfer”, Vol. 6, Academic Press, New York, 1970
  8. F. W., Dittus, and L. M. K., Boelter, “Heat transfer in automobile radiators of the tubular type”, University of California Publications on Engineering, Vol. 2, pp. 443-461, 1930. [9] W., Nusselt, “Die oberflachenkondensation des wasserdampfes”, Z. Ver. Deut. Ing., Vol. 60, pp. 541-569, 1916
  9. W.,M., Rohsenow, “Heat transfer and temperature distribution in laminar film condensation”, Trans. ASME, Vol. 78, pp. 1645, 1956
  10. M. M., Chen, “An analitical study of laminar film condensation: part 2-single and multiple horizontal tubes”, Trans. ASME, J. Heat Transfer, Vol. 83, pp. 55-60, 1961