Journals / Environmental Research and Technology / 2018 / Cilt: 1 - Sayı: 4

Characterization and optimization of palm industry ash waste (PIAW) derived zeolites using central composite cesign (CCD)

Pages
27–33
Publication Date
2018-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These findings are also important for waste reduction, recycling and zeolites synthesis from material under economic value.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The prodigious ashes from power electricity generation plants were devastated as solid waste by palm industries into environment.
📊
Key Findings & Data:Performance of POFA was characterized, and process optimization was done by employing CCD.
💡
Conclusion & Impact:These findings are also important for waste reduction, recycling and zeolites synthesis from material under economic value.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Quadratic model · Ultrasound irradiation · Alkaline

Abstract

The prodigious ashes from power electricity generation plants were devastated as solid waste by palm industries into environment. PIAW, mostly Palm Oil Fuel Ash (POFA) comprising silica and alumina was discarded as non-profit oriented products, thus this work is about PIAW, essentially POFA derived zeolites using ultrasound irradiation. Performance of POFA was characterized, and process optimization was done by employing CCD. Pre-treated POFA as feedstock and formed zeolites were designated and analyzed using X-Ray Fluorescence (X-RF), Scanning Electron Microscopy (SEM) images, Fourier Transform Infrared (FTIR) spectrum and X-Ray Diffraction (XRD) diagram. Alkaline concentration (0.6 M-1.4M), irradiation time (140 min-160 min) and KOH/POFA (1.5:1-2.5:1) were examined as non-constant variables. Otherwise, ultrasonic power (600W), temperature (80°C) and silica alumina ratio were justified as constant and response variables. An optimal synthesized zeolites as ratio of SiO2 and Al2O3 (10.60) was found from surface plot based on quadratic typical at KOH=1 M, KOH/POFA=2 and time=150 min. Presence of A, P, X and irregular shape structures zeolites are commensurable to another resources, mainly fly ash. These findings are also important for waste reduction, recycling and zeolites synthesis from material under economic value.

🔖

Cite This Article

NURDİN, S., KHAİRUDDİN, S. A., SUKRİ, H. A. M., WOOİ, C. C. (2018). Characterization and optimization of palm industry ash waste (PIAW) derived zeolites using central composite cesign (CCD). Environmental Research and Technology, Cilt: 1 - Sayı: 4, 27–33. https://ajindex.com/articles/754297

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. . A. Kongnoo, S. Tontisirin, P. Worathanakul, and C. Phalakornkule, “Surface characteristics and CO2 adsorption capacities of acid- activated zeolite 13X prepared from palm oil mill fly ash”, Fuel, 193, 385–394, 2017. [2]. Z. Y. Lai and S. M. Goh, “Mechanical strength of binary oil palm kernel shell and HZSM-5 zeolite fuel pellets”, Fuel, 150, 378–385, 2015. [3]. N. H. A. S. Lim, M. A. Ismail, H. S. Lee, M. W. Hussin, A. R. M. Sam, and M. Samadi, “The effects of high volume nano palm oil fuel ash on microstructure properties and hydration temperature of mortar”, Construction and Building Materials, 93, 29–34, 2015. [4]. M. M. U. Islam, K. H. Mo, U. J. Alengaram, and M. Z. Jumaat, “Mechanical and fresh properties of sustainable oil palm shell lightweight concrete incorporating palm oil fuel ash”, Journal of Cleaner Production, 115, 307–314, 2015. [5]. M. Safiuddin, M. Abdus Salam, and M. Z. Jumaat, “Utilization of Palm Oil Fuel Ash in Concrete: A Review”, Journal of Civil Engineering and Management, 17(2), 234–247, 2011. [6]. M. E. Rahman, A. L. Boon, A. S. Muntohar, M. N. H. Tanim, and V. Pakrashi, “Performance of masonry blocks incorporating Palm Oil Fuel Ash”, Journal of Cleaner Production, 78, 195–201, 2014. [7]. C. Acquah, L. S. Yon, Z. Tuah, N. L. Ngee, and M. K. Danquah, “Synthesis and performance analysis of oil palm ash (OPA) based adsorbent as a palm oil bleaching material”, Journal of Cleaner Production, 139, 1098–1104, 2016. [8]. Z. X. Ooi, H. Ismail, and A. Abu Bakar, “Characterization of oil palm ash (OPA) and thermal properties of OPA-filled natural rubber compounds”, Journal of Elastomers and Plastics, 47(1), 13–27, 2015. [9]. A. Á. B Maia, R. F. Neves, Rô. S. Angélica, and H. Pöllmann, “Synthesis, optimisation and characterisation of the zeolite NaA using kaolin waste from the Amazon Region: Production of zeolites KA, MgA and CaA”, Applied Clay Science, 108, 55–60, 2015. [10]. L. Deng, Q. Xu, and H. Wu, “ Science Direct Synthesis of zeolite-like material by hydrothermal and fusion methods using municipal solid waste fly ash”, Procedia Environmental Sciences, 31, 662–667, 2016. [11]. N. Al-Jammal, Z. Al-Hamamre, and M. Alnaief, “Manufacturing of zeolites based catalyst from zeolites tuft for biodiesel production from waste sunflower oil”, Renewable Energy, 93, 449–459, 2016. [12]. G. Watanabe, Y. Nakasaka, T. Taniguchi, T. Yoshikawa, T. Tago and T. Masuda, “Kinetic studies on high-pressure methylation of 2-methylnaphthalene over MTW-type