Journals / Environmental Research and Technology / 2019 / Cilt: 2 - Sayı: 2

Study of the chemical durability of a hollandite mineral leached in both static and dynamic conditions

Pages
85–92
Publication Date
2019-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The MCC5 test is considered as a dissolution test.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Hollandite is a ceramic used for the confinement of cesium.
📊
Key Findings & Data:In this study, we synthesized a hollandite of chemical formula: K0.28Ba0.76Ti7.10Cu0.9O16, where K simulates cesium.
💡
Conclusion & Impact:The MCC5 test is considered as a dissolution test.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Hollandite · Cesium · Leaching

Abstract

Hollandite is a ceramic used for the confinement of cesium. In this study, we synthesized a hollandite of chemical formula: K0.28Ba0.76Ti7.10Cu0.9O16, where K simulates cesium. This new formulation of a copper-containing hollandite was synthesized by a double calcination; the first one at 950°C during 18 h, and the second one at 1000°C during 6 h. The mineral was identified by X-ray diffraction. Various leaching tests are employed in order to assess the chemical durability of this mineral. The static test MCC1 gave elemental leaching rates of: 7.097 10-5 g cm-2 d-1 for Cu, 5.592 10-7 g cm-2 d-1 for Ti and 4.630 10-6 g cm-2 d-1 for Ba, after 42 days. This corresponds to dissolved elements percentages of: 5.7% Cu, 0.0007% Ti and 0.2% Ba. The equivalent amount of dissolved K is 0.0029%. A static test in the presence of a clay barrier, gave the best leaching rates (at 42nd day, NR<3.704 10-7 g cm-2 d-1 of Cu, and <1.11 10-9 g cm-2 d-1 of Ti and <3.67 10-9 g cm-2 d-1 of Ba). This corresponds to 0.030% of Cu, 10-6 % of Ti and 0.002 % of Ba, and about 0.002% of K. In MCC5 dynamic test, the leaching rates of Cu, Ti and Ba reached 2 10-6, 1,468 10-7, and 1.084 10-5 g cm-2 d-1, respectively, corresponding to 0.028% Cu, 0.0003% Ti, and 0.082% Ba, after seven days. The estimated K leaching rate is 3.613 10-6 g cm-2 d-1, ie 0.082% K dissolved in the leachate. There is no passivation layer formation. The MCC5 test is considered as a dissolution test.

🔖

Cite This Article

AOUCHİCHE, F., KAMEL, N., MOUDİR, D., MOUHEB, Y., KAMARİZ, S. (2019). Study of the chemical durability of a hollandite mineral leached in both static and dynamic conditions. Environmental Research and Technology, Cilt: 2 - Sayı: 2, 85–92. https://ajindex.com/articles/754290

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. A.E. Ringwood, V.M. Oversby, S.E. Kesson, W. Sinclair, N. Ware, W. Hibberson, and A. Major, “immobilization of high-level nuclear reactor wastes in Synroc: a current appraisal”, Nuclear and Chemical Waste Management, vol. 2, pp.287-305, Oct. 1981
  2. Aubin-Chevaldonnet, “Synthèse, caractérisation et étude du comportement sous irradiation électronique de matrices de type hollandite destinées au confinement du césium radioactif”, thesis, Lab. Chimie Appliquée Etat Solid., Université Pierre et Marie Curie − PARIS VI, Paris, Nov. 2004
  3. A. Byström, and A. M. Byström, “The crystal structure of hollandite, the related manganese oxide minerals and α-MnO2”, Acta Cryst., vol. 3, pp. 146-154, Mar.1950
  4. R.W. Cheary, “An analysis of the structural characteristics of hollandite compounds”, Acta Cryst., vol. B42, pp. 229-236, June. 1986
  5. D.S. Filimonov, Z.-K. Liu, and C.A. Randall, “Synthesis and thermal stability of a new barium polytitanate compound, Ba1.054Ti0.946O2.946”, Mater. Res. Bull, vol. 37, pp. 467-473, March. 2002
  6. J.E. Post, R.B. Von Dreele, and P. R. Buseck, “Symmetry and cation displacements in hollandites: structure refinements of hollandite, cryptomelane and priderite”, Acta Crys, vol. B38, pp. 1056-1065, April 1982
  7. J. Vicat, E. Fanchon, P. Strobel, and D.T. Qui, “The structure of K1.33Mn8O16 and cation ordering in hollandite-type structures”, Acta Cryst, vol. B42, pp. 162-167, Apr. 1986
  8. J. Zhang, and C.W. Burnham, “Hollandite-type phases: Geometric consideration of unit-cell size and symmetry”, Am. Mineral, vol. 79, pp. 168-174, Jan.-Feb. 1994
  9. F. Angeli, P. McGlinn, and P. Frugier, “Chemical durability of hollandite ceramic for conditioning cesium”, J. Nucl. Mater, vol 380, pp. 59–69, Oct. 2008
  10. V. Aubin-Chevaldonnet, D. Caurant, A. Dannoux, D. Gourier, T. Charpentier, L. Mazerolles, and T. Advocat, “Preparation and characterization of (Ba,Cs)(M,Ti)8O16 (M = Al3+, Fe3+, Ga3+, Cr3+, Sc3+, Mg2+) hollandite ceramics developed for radioactive cesium immobilization”, J. Nucl. Mater, vol 366, pp. 137-160, June 2007
  11. A.Y. Leinekugel-le-Cocq, P. Deniard, S. Jobic, R. Cerny, F. Bart, and H. Emerich, “Synthesis and characterization of hollandite-type material intended for the specific containment of radioactive cesium”, J. Solid State Chem, vol 179, pp. 3196-3208, Oct. 2006
  12. V. Aubin-Chevaldonnet, P. Deniard, M. Evain, A.Y. Leinek