Journals / Environmental Research and Technology / 2019 / Cilt: 2 - Sayı: 2

Assessing pretreated municipal solid waste degradation by BMP and fibre analysis

Pages
57–62
Publication Date
2019-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results indicate that solids composition of MBT wastes may provide a useful indication of the biodegradation potential.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Landfill continues to be the major method of Municipal solid waste (MSW) disposal in the UK and many other countries despite considerable efforts to limit its use.
📊
Key Findings & Data:To address this, a series of biochemical methane potential (BMP) tests have been undertaken to characterize the anaerobic biodegradation potential of two mechanically biologically treated (MBT) waste samples in terms of biogas yield, solids composition (loss on ignition, total carbon, cellulose, hemicellulose and lignin contents), and assessment of leachate characteristics during the biodegradation process.
💡
Conclusion & Impact:The results indicate that solids composition of MBT wastes may provide a useful indication of the biodegradation potential.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Biodegradability · BMP · Landfill

Abstract

Landfill continues to be the major method of Municipal solid waste (MSW) disposal in the UK and many other countries despite considerable efforts to limit its use. The EU Landfill Directive requires, amongst other things, that waste is treated to reduce its biodegradability prior to disposal to landfill. This pre-treatment is often achieved through what is generically termed mechanical-biological treatment. Predicting the biodegradability or degradation potential of these pre-treated wastes is important for the long term management and aftercare of landfill sites. To address this, a series of biochemical methane potential (BMP) tests have been undertaken to characterize the anaerobic biodegradation potential of two mechanically biologically treated (MBT) waste samples in terms of biogas yield, solids composition (loss on ignition, total carbon, cellulose, hemicellulose and lignin contents), and assessment of leachate characteristics during the biodegradation process. Experimental results from a long term study of MBT wastes treated to different standards are analyzed and compared. The relationship between biogas potential and solids composition was investigated, and carbon and nitrogen mass balances are discussed. The biogas potential was shown to correlate well with the ratio of cellulose plus hemicellulose to lignin, loss on ignition and total carbon content of the waste indicating a clear link between these parameters. The results indicate that solids composition of MBT wastes may provide a useful indication of the biodegradation potential. The mass balance indicates that a large proportion of carbon and nitrogen remain locked up in the waste material and is not released.

🔖

Cite This Article

SİDDİQUİ, A. (2019). Assessing pretreated municipal solid waste degradation by BMP and fibre analysis. Environmental Research and Technology, Cilt: 2 - Sayı: 2, 57–62. https://ajindex.com/articles/754286

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. . Wagland, S.T., Tyrrel, S.F., Godley, A.R., and Smith, R. (2009). Test methods to aid in the evaluation of the diversion of biodegradable municipal waste (BMW) from landfill. Waste Management 29, 1218–1226. [2]. Godley, A. R., Graham, A., and K., E. (2005). Estimating biodegradable municipal solid waste diversion from landfill: Screening exercise to evaluate the performance of biodegradable waste test methods. Environment Agency R&D Technical Report P1-513 (EP 0173) phase 1. [3]. Hansen, T. L., Schmidt, J. E., Angelidaki, I., Marca, E., Jansen, J. C., Mosbæk, H., and Christensen, T. H. (2004). Method for determination of methane potentials of solid organic waste. Waste Management 24, 393 -400. [4]. Barlaz, M. A., Rooker, A. P., Kjeldsen, P., Gabr, M. A., and Borden, R. C. (2002). A Critical Evaluation of Factors Required to Terminate the Post-Closure Monitoring Period at Solid Waste Landfills. Environmental Science and Technology 36, 3457 - 3464. [5]. Hossain, M. S., Gabr, M. A., and Barlaz, M. A. (2003). Relationship of compressibility parameters to municipal solid waste decomposition. ASCE Journal of Geotechnical and Geoenvironmental Engineering 129, 1151 - 1158. [6]. Baldwin, T. D., Stinson, J., and Ham, R. K. (1998). Decomposition of specific materials buried within sanitary landfills. Journal of Environmental Engineering 124, 1193- 1202. [7]. Robinson, H.D., Knox, K., Bone, B.D., and Picken, A. (2005). Leachate quality from landfilled MBT waste. Waste Management 25, 383-391. [8]. Bayard R., de Araujo Morais, J., Rouez, Fifi M U., Achour, F. and Ducom, G. (2008), Effect of biological pretreatment of coarse MSW on landfill behaviour: laboratory study, Water Science and Technology, 58.7, 1361-1369. [9]. Bockreis, A. and Steinberg, I. (2005). Infuence of mechanical-biological waste pre-treatment methods on the gas formation in landfills. Waste Management 25, 337–343. [10]. Leikam, K., and Stegmann, R. (1999). Influence of mechanical–biological treatment of municipal solid waste on landfill behaviour. Waste Management and Research 17, 424–429. [11]. Florencio, L., Field, J. A., and Lettinga, G. (1995). Substrate competition between methanogens and acetogens during the degradation of methanol in UASB reactors. Water Research 29(3), 915-922. [12]. Zheng, B., Richards, D.J., Smallman, D.J., and Beaven, R.P. (2007). Assessing MSW degradation by BMP and fibre analysis, Waste and Resource Management 160(WR4), 133-139. [13]. Ivanova, L. K., Richards, D. J. an