Journals / Environmental Research and Technology / 2019 / Cilt: 2 - Sayı: 3

Adsorption of Basic Blue 41 using Juniperus excelsa: Isotherm, kinetics and thermodynamics studies

Pages
112–121
Publication Date
2019-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results, Freundlich isotherm model becomes more convenient option compared with Langmuir and Temkin models.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study Juniperus excelsa shavings powder (JESP) was utilized as an adsorbent for the removal of Basic Blue 41 (BB 41) which is one of the common basic dyes, from aqueous solution.
📊
Key Findings & Data:Thus the process fits PSO kinetic model with higher R2 values than other two models.
💡
Conclusion & Impact:According to the results, Freundlich isotherm model becomes more convenient option compared with Langmuir and Temkin models.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Basic Blue 41 · dye adsorption · Juniperus excelsa

Abstract

In this study Juniperus excelsa shavings powder (JESP) was utilized as an adsorbent for the removal of Basic Blue 41 (BB 41) which is one of the common basic dyes, from aqueous solution. The adsorption experiments were carried out in a batch system and effects of initial concentration of dye, interaction time and temperature were investigated. Langmuir, Freundlich and Temkin adsorption isotherms were used to model equilibrium data. According to the results, Freundlich isotherm model becomes more convenient option compared with Langmuir and Temkin models. Freundlich model coefficients are raise as the temperature rises, showing that the adsorption process becomes favorable higher temperature. The kinetic parameters were determined by pseudo first order (PFO), pseudo second order (PSO) and intra-particle diffusion (IPD) models. Results indicated that experimental and calculated qe values are matched to each other. Thus the process fits PSO kinetic model with higher R2 values than other two models. Kinetic constants become closer to both temperatures and initial concentrations and qe values are increases with increasing concentration of BB 41. Initial dye concentration elevates from 25 to 100 mg L-1, dye adsorption capacity onto JESP from 3.06 to 16.53 mg g-1, respectively. Thermodynamic parameters for instance free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were assessed. Enthalpy and entropy of this separation process are determined from 3081.91 J mol-1 and 12.33 kJ mol-1, respectively. The negative values of ΔG° showed that this separation process was endothermic and natural. The research results demonstrate that JESP may be a substitute than pricey adsorbents for dye removal.

🔖

Cite This Article

KUL, A. R., ALDEMİR, A., ALKAN, S., ELİK, H., ÇALIŞKAN, M. (2019). Adsorption of Basic Blue 41 using Juniperus excelsa: Isotherm, kinetics and thermodynamics studies. Environmental Research and Technology, Cilt: 2 - Sayı: 3, 112–121. https://ajindex.com/articles/754280

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Ciesielczyk, F., et al., Active MgO-SiO2 hybrid material for organic dye removal: A mechanism and interaction study of the adsorption of C.I. Acid Blue 29 and C.I. Basic Blue 9. J Environ Manage, 2017. 204(Pt 1): p. 123-135
  2. Mehrizi, M.Z. and A. Badiei, Highly efficient removal of basic blue 41 with nanoporous silica. Water Resources and Industry, 2014. 5: p. 49-57
  3. Humelnicua, I., et al., The removal of Basic Blue 41 textile dye from aqueous solution by adsorption onto natural zeolitic tuff: Kinetics and thermodynamics. Process Safety and Environmental Protection, 2017. 105: p. 274-287
  4. Wawrzkiewicz, M., Removal of C.I. Basic Blue 3 dye by sorption onto cation exchange resin functionalized and non-functionalized polymeric sorbents from aqueous solutions and wastewaters. Chemical Engineering Journal, 2013. 217: p. 414-425
  5. Laysandra, L., et al., Adsorption and photocatalytic performance of bentonite-titanium dioxide composites for methylene blue and rhodamine B decoloration. Heliyon, 2017. 3(12): p. e00488
  6. Regti, A., et al., Removal of Basic Blue 41 dyes using Persea americana-activated carbon prepared by phosphoric acid action. Int J Ind Chem, 2017. 8: p. 187-195
  7. Luo, H., et al., Adsorption behavior and mechanism of acidic blue 25 dye onto cucurbit[8]uril: A spectral and DFT study. Spectrochim Acta A Mol Biomol Spectrosc, 2018. 193: p. 125-132
  8. Jin, Y., et al., Efficient adsorption of methylene blue and lead ions in aqueous solutions by 5-sulfosalicylic acid modified lignin. Int J Biol Macromol, 2018. 123: p. 50-58
  9. Hasan, R., et al., Process optimization of methylene blue adsorption onto eggshell–treated palm oil fuel ash. Environmental Technology & Innovation, 2019. 13: p. 62-73
  10. Ali, I. and V.K. Gupta, Advances in water treatment by adsorption technology. Nat. Protoc, 2006. 1: p. 2661-2667
  11. Daneshvar, E., et al., Shrimp shell as an efficient bioadsorbent for Acid Blue 25 dye removal from aqueous solution. Journal of the Taiwan Institute of Chemical Engineers, 2014. 45: p. 2926-2934
  12. Sankhadeep Basu, Gourab Ghosh, and S. Saha, Adsorption characteristics of phosphoric acid induced activation of bio-carbon: Equilibrium, kinetics, thermodynamics and batch adsorber design. Process Safety and Environmental Protection, 2018. 117: p. 125-142
  13. Basas-Jaumandreu, J., et al., Labdane-type diterpenoids from Juniperus communis needles. Industrial Crops and Products, 2015. 76: p. 333-345
  14. Yaglioglu, A.S. and F. Eser, S